Modifier and Type	Class and Description
public static class	GeometryUtils.DimensionSystemTarget Converter output target that determines minimal dimension system for a geometry.
public static class	GeometryUtils.EnvelopeTarget Converter output target that calculates an envelope.
public abstract static class	GeometryUtils.Target Converter output target.

Field Summary

Modifier and Type	Field and Description
public static final int	DIMENSION_SYSTEM_XY Code of 2D (XY) dimension system.
public static final int	DIMENSION_SYSTEM_XYM Code of M (XYM) dimension system.
public static final int	DIMENSION_SYSTEM_XYZ Code of Z (XYZ) dimension system.
public static final int	DIMENSION_SYSTEM_XYZM Code of ZM (XYZM) dimension system.
public static final int	GEOMETRY_COLLECTION GEOMETRYCOLLECTION geometry type.
public static final int	LINE_STRING LINESTRING geometry type.
public static final int	M Number of M coordinate.
public static final int	MAX_X Maximum X coordinate index.
public static final int	MAX_Y Maximum Y coordinate index.
public static final int	MIN_X Minimum X coordinate index.
public static final int	MIN_Y Minimum Y coordinate index.
public static final int	MULTI_LINE_STRING MULTILINESTRING geometry type.
public static final int	MULTI_POINT MULTIPOINT geometry type.
public static final int	MULTI_POLYGON MULTIPOLYGON geometry type.
public static final int	POINT POINT geometry type.
public static final int	POLYGON POLYGON geometry type.
public static final int	X Number of X coordinate.
public static final int	Y Number of Y coordinate.
public static final int	Z Number of Z coordinate.

Access	Constructor and Description
private	GeometryUtils()

Method Summary

Modifier and Type	Method and Description
pack-priv static double	Returns: the same double value checkFinite(double a double value d) Throw exception if param is not finite value (ie.
public static double[]	Returns: envelope, or null getEnvelope(byte[] EWKB of a geometry ewkb) Calculates an envelope of a specified geometry.
public static boolean	Returns: whether the specified envelopes intersects intersects(double[] first envelope, or null envelope1, double[] second envelope, or null envelope2) Checks whether two envelopes intersect with each other.
pack-priv static double	Returns: normalized value toCanonicalDouble(double double value d) Normalizes all NaNs into single type on NaN and negative zero to positive zero.
public static double[]	Returns: union of two envelopes union(double[] first envelope, or null envelope1, double[] second envelope, or null envelope2) Returns union of two envelopes.

Inherited from java.lang.Object:: clone equals finalize getClass hashCode notify notifyAll toString wait wait wait

Field Detail

DIMENSION_SYSTEM_XY	back to summary
public static final int DIMENSION_SYSTEM_XY Code of 2D (XY) dimension system.

DIMENSION_SYSTEM_XYM	back to summary
public static final int DIMENSION_SYSTEM_XYM Code of M (XYM) dimension system. Can also be used in bit masks to determine presence of dimension M.

DIMENSION_SYSTEM_XYZ	back to summary
public static final int DIMENSION_SYSTEM_XYZ Code of Z (XYZ) dimension system. Can also be used in bit masks to determine presence of dimension Z.

DIMENSION_SYSTEM_XYZM	back to summary
public static final int DIMENSION_SYSTEM_XYZM Code of ZM (XYZM) dimension system. Can be also combined from `DIMENSION_SYSTEM_XYZ` and `DIMENSION_SYSTEM_XYM` using bitwise OR.

GEOMETRY_COLLECTION	back to summary
public static final int GEOMETRY_COLLECTION GEOMETRYCOLLECTION geometry type.

LINE_STRING	back to summary
public static final int LINE_STRING LINESTRING geometry type.

M	back to summary
public static final int M Number of M coordinate.

MAX_X	back to summary
public static final int MAX_X Maximum X coordinate index.

MAX_Y	back to summary
public static final int MAX_Y Maximum Y coordinate index.

MIN_X	back to summary
public static final int MIN_X Minimum X coordinate index.

MIN_Y	back to summary
public static final int MIN_Y Minimum Y coordinate index.

MULTI_LINE_STRING	back to summary
public static final int MULTI_LINE_STRING MULTILINESTRING geometry type.

MULTI_POINT	back to summary
public static final int MULTI_POINT MULTIPOINT geometry type.

MULTI_POLYGON	back to summary
public static final int MULTI_POLYGON MULTIPOLYGON geometry type.

POINT	back to summary
public static final int POINT POINT geometry type.

POLYGON	back to summary
public static final int POLYGON POLYGON geometry type.

X	back to summary
public static final int X Number of X coordinate.

Y	back to summary
public static final int Y Number of Y coordinate.

Z	back to summary
public static final int Z Number of Z coordinate.

GeometryUtils	back to summary
private GeometryUtils()

Method Detail

checkFinite	back to summary
pack-priv static double checkFinite(double d) Throw exception if param is not finite value (ie. NaN/inf/etc) Parameters d:double a double value Returns:double the same double value

checkFinite

back to summary

pack-priv static double checkFinite(double d)

Throw exception if param is not finite value (ie. NaN/inf/etc)

Parameters

d:double: a double value

Returns:double

the same double value

getEnvelope	back to summary
public static double[] getEnvelope(byte[] ewkb) Calculates an envelope of a specified geometry. Parameters ewkb:byte[] EWKB of a geometry Returns:double[] envelope, or null

getEnvelope

back to summary

public static double[] getEnvelope(byte[] ewkb)

Calculates an envelope of a specified geometry.

Parameters

ewkb:byte[]: EWKB of a geometry

Returns:double[]

envelope, or null

intersects	back to summary
public static boolean intersects(double[] envelope1, double[] envelope2) Checks whether two envelopes intersect with each other. Parameters envelope1:double[] first envelope, or null envelope2:double[] second envelope, or null Returns:boolean whether the specified envelopes intersects

intersects

back to summary

public static boolean intersects(double[] envelope1, double[] envelope2)

Checks whether two envelopes intersect with each other.

Parameters

envelope1:double[]: first envelope, or null
envelope2:double[]: second envelope, or null

Returns:boolean

whether the specified envelopes intersects

toCanonicalDouble	back to summary
pack-priv static double toCanonicalDouble(double d) Normalizes all NaNs into single type on NaN and negative zero to positive zero. Parameters d:double double value Returns:double normalized value

toCanonicalDouble

back to summary

pack-priv static double toCanonicalDouble(double d)

Normalizes all NaNs into single type on NaN and negative zero to positive zero.

Parameters

d:double: double value

Returns:double

normalized value

union	back to summary
public static double[] union(double[] envelope1, double[] envelope2) Returns union of two envelopes. This method does not modify the specified envelopes, but may return one of them as a result. Parameters envelope1:double[] first envelope, or null envelope2:double[] second envelope, or null Returns:double[] union of two envelopes

union

back to summary

public static double[] union(double[] envelope1, double[] envelope2)

Returns union of two envelopes. This method does not modify the specified envelopes, but may return one of them as a result.

Parameters

envelope1:double[]: first envelope, or null
envelope2:double[]: second envelope, or null

Returns:double[]

union of two envelopes

org.h2.util.geometry back to summary

public final Class GeometryUtils.DimensionSystemTarget

Class Inheritance

extends Target

java.lang.Object
org.h2.util.geometry.GeometryUtils.Target
org.h2.util.geometry.GeometryUtils.DimensionSystemTarget

Converter output target that determines minimal dimension system for a geometry.

Field Summary

Modifier and Type	Field and Description
private boolean	hasM
private boolean	hasZ

Constructor Summary

Access	Constructor and Description
public	DimensionSystemTarget() Creates a new dimension system determination target.

Method Summary

Modifier and Type	Method and Description
protected void	addCoordinate(double X coordinate x, double Y coordinate y, double Z coordinate (NaN if not used) z, double M coordinate (NaN if not used) m, int 0-based index of coordinate in the current sequence index, int total number of coordinates in the current sequence total) Implements abstract org.h2.util.geometry.GeometryUtils.Target.addCoordinate. Invoked to add a coordinate to a geometry.
protected void	dimensionSystem(int dimension system dimensionSystem) Overrides org.h2.util.geometry.GeometryUtils.Target.dimensionSystem. Invoked to add dimension system requirement.
public int	Returns: the minimal dimension system getDimensionSystem() Returns the minimal dimension system.

Inherited from org.h2.util.geometry.GeometryUtils.Target:: endCollectionItem endNonEmptyPolygon endObject init startCollection startCollectionItem startLineString startPoint startPolygon startPolygonInner

Field Detail

hasM	back to summary
private boolean hasM

hasZ	back to summary
private boolean hasZ

Constructor Detail

DimensionSystemTarget	back to summary
public DimensionSystemTarget() Creates a new dimension system determination target.

Method Detail

addCoordinate	back to summary
protected void addCoordinate(double x, double y, double z, double m, int index, int total) Implements abstract org.h2.util.geometry.GeometryUtils.Target.addCoordinate. Doc from org.h2.util.geometry.GeometryUtils.Target.addCoordinate. Invoked to add a coordinate to a geometry. Parameters x:double X coordinate y:double Y coordinate z:double Z coordinate (NaN if not used) m:double M coordinate (NaN if not used) index:int 0-based index of coordinate in the current sequence total:int total number of coordinates in the current sequence Annotations @Override

addCoordinate

back to summary

protected void addCoordinate(double x, double y, double z, double m, int index, int total)

Implements abstract org.h2.util.geometry.GeometryUtils.Target.addCoordinate.

Doc from org.h2.util.geometry.GeometryUtils.Target.addCoordinate.

Invoked to add a coordinate to a geometry.

Parameters

x:double: X coordinate
y:double: Y coordinate
z:double: Z coordinate (NaN if not used)
m:double: M coordinate (NaN if not used)
index:int: 0-based index of coordinate in the current sequence
total:int: total number of coordinates in the current sequence

Annotations

@Override

dimensionSystem	back to summary
protected void dimensionSystem(int dimensionSystem) Overrides org.h2.util.geometry.GeometryUtils.Target.dimensionSystem. Doc from org.h2.util.geometry.GeometryUtils.Target.dimensionSystem. Invoked to add dimension system requirement. Parameters dimensionSystem:int dimension system Annotations @Override

dimensionSystem

back to summary

protected void dimensionSystem(int dimensionSystem)

Overrides org.h2.util.geometry.GeometryUtils.Target.dimensionSystem.

Doc from org.h2.util.geometry.GeometryUtils.Target.dimensionSystem.

Invoked to add dimension system requirement.

Parameters

dimensionSystem:int: dimension system

Annotations

@Override

getDimensionSystem	back to summary
public int getDimensionSystem() Returns the minimal dimension system. Returns:int the minimal dimension system

getDimensionSystem

back to summary

public int getDimensionSystem()

Returns the minimal dimension system.

Returns:int: the minimal dimension system

org.h2.util.geometry back to summary

public final Class GeometryUtils.EnvelopeTarget

Class Inheritance

extends Target

java.lang.Object
org.h2.util.geometry.GeometryUtils.Target
org.h2.util.geometry.GeometryUtils.EnvelopeTarget

Converter output target that calculates an envelope.

Field Summary

Modifier and Type	Field and Description
private boolean	enabled Enables or disables the envelope calculation.
private double	maxX
private double	maxY
private double	minX
private double	minY
private boolean	set Whether envelope was set.

Constructor Summary

Access	Constructor and Description
public	EnvelopeTarget() Creates a new envelope calculation target.

Method Summary

Modifier and Type	Method and Description
protected void	addCoordinate(double X coordinate x, double Y coordinate y, double Z coordinate (NaN if not used) z, double M coordinate (NaN if not used) m, int 0-based index of coordinate in the current sequence index, int total number of coordinates in the current sequence total) Implements abstract org.h2.util.geometry.GeometryUtils.Target.addCoordinate. Invoked to add a coordinate to a geometry.
public double[]	Returns: the envelope, or null getEnvelope() Returns the envelope.
protected void	startLineString(int number of points in line string numPoints) Overrides org.h2.util.geometry.GeometryUtils.Target.startLineString. Invoked before writing a LINESTRING.
protected void	startPoint() Overrides org.h2.util.geometry.GeometryUtils.Target.startPoint. Invoked before writing a POINT.
protected void	startPolygon(int number of inner polygons numInner, int number of points in outer polygon numPoints) Overrides org.h2.util.geometry.GeometryUtils.Target.startPolygon. Invoked before writing a POLYGON.
protected void	startPolygonInner(int number of points in inner polygon numInner) Overrides org.h2.util.geometry.GeometryUtils.Target.startPolygonInner. Invoked before writing an inner polygon in POLYGON.

Inherited from org.h2.util.geometry.GeometryUtils.Target:: dimensionSystem endCollectionItem endNonEmptyPolygon endObject init startCollection startCollectionItem

Field Detail

enabled	back to summary
private boolean enabled Enables or disables the envelope calculation. Inner rings of polygons are not counted.

maxX	back to summary
private double maxX

maxY	back to summary
private double maxY

minX	back to summary
private double minX

minY	back to summary
private double minY

set	back to summary
private boolean set Whether envelope was set.

Constructor Detail

EnvelopeTarget	back to summary
public EnvelopeTarget() Creates a new envelope calculation target.

Method Detail

addCoordinate	back to summary
protected void addCoordinate(double x, double y, double z, double m, int index, int total) Implements abstract org.h2.util.geometry.GeometryUtils.Target.addCoordinate. Doc from org.h2.util.geometry.GeometryUtils.Target.addCoordinate. Invoked to add a coordinate to a geometry. Parameters x:double X coordinate y:double Y coordinate z:double Z coordinate (NaN if not used) m:double M coordinate (NaN if not used) index:int 0-based index of coordinate in the current sequence total:int total number of coordinates in the current sequence Annotations @Override

addCoordinate

back to summary

protected void addCoordinate(double x, double y, double z, double m, int index, int total)

Implements abstract org.h2.util.geometry.GeometryUtils.Target.addCoordinate.

Doc from org.h2.util.geometry.GeometryUtils.Target.addCoordinate.

Invoked to add a coordinate to a geometry.

Parameters

x:double: X coordinate
y:double: Y coordinate
z:double: Z coordinate (NaN if not used)
m:double: M coordinate (NaN if not used)
index:int: 0-based index of coordinate in the current sequence
total:int: total number of coordinates in the current sequence

Annotations

@Override

getEnvelope	back to summary
public double[] getEnvelope() Returns the envelope. Returns:double[] the envelope, or null

getEnvelope

back to summary

public double[] getEnvelope()

Returns the envelope.

Returns:double[]: the envelope, or null

startLineString

back to summary

protected void startLineString(int numPoints)

Overrides org.h2.util.geometry.GeometryUtils.Target.startLineString.

Doc from org.h2.util.geometry.GeometryUtils.Target.startLineString.

Invoked before writing a LINESTRING.

Parameters

numPoints:int: number of points in line string

Annotations

@Override

startPoint

back to summary

protected void startPoint()

Overrides org.h2.util.geometry.GeometryUtils.Target.startPoint.

Doc from org.h2.util.geometry.GeometryUtils.Target.startPoint.

Invoked before writing a POINT.

Annotations

@Override

startPolygon

back to summary

protected void startPolygon(int numInner, int numPoints)

Overrides org.h2.util.geometry.GeometryUtils.Target.startPolygon.

Doc from org.h2.util.geometry.GeometryUtils.Target.startPolygon.

Invoked before writing a POLYGON. If polygon is empty, both parameters are 0.

Parameters

numInner:int: number of inner polygons
numPoints:int: number of points in outer polygon

Annotations

@Override

startPolygonInner

back to summary

protected void startPolygonInner(int numInner)

Overrides org.h2.util.geometry.GeometryUtils.Target.startPolygonInner.

Doc from org.h2.util.geometry.GeometryUtils.Target.startPolygonInner.

Invoked before writing an inner polygon in POLYGON.

Parameters

numInner:int: number of points in inner polygon

Annotations

@Override

org.h2.util.geometry back to summary

public abstract Class GeometryUtils.Target

Class Inheritance

extends Object

java.lang.Object
org.h2.util.geometry.GeometryUtils.Target

Known Direct Subclasses

org.h2.util.geometry.GeometryUtils.EnvelopeTarget, org.h2.util.geometry.GeometryUtils.DimensionSystemTarget, org.h2.util.geometry.JTSUtils.GeometryTarget, org.h2.util.geometry.EWKBUtils.EWKBTarget, org.h2.util.geometry.EWKTUtils.EWKTTarget, org.h2.util.geometry.GeoJsonUtils.GeoJsonTarget

Converter output target.

Constructor Summary

Access	Constructor and Description
public	Target()

Method Summary

Modifier and Type	Method and Description
protected abstract void	addCoordinate(double X coordinate x, double Y coordinate y, double Z coordinate (NaN if not used) z, double M coordinate (NaN if not used) m, int 0-based index of coordinate in the current sequence index, int total number of coordinates in the current sequence total) Invoked to add a coordinate to a geometry.
protected void	dimensionSystem(int dimension system dimensionSystem) Invoked to add dimension system requirement.
protected void	endCollectionItem(GeometryUtils.Target the result of `startCollectionItem(int, int)` target, int type of collection type, int 0-based index of this item in the collection index, int total number of items in the collection total) Invoked after writing of a collection item.
protected void	endNonEmptyPolygon() Invoked after writing of non-empty POLYGON.
protected void	endObject(int type of the object type) Invoked after writing of the object.
protected void	init(int SRID srid) Initializes top-level target.
protected void	startCollection(int type of collection, one of `GeometryUtils#MULTI_POINT`, `GeometryUtils#MULTI_LINE_STRING`, `GeometryUtils#MULTI_POLYGON`, `GeometryUtils#GEOMETRY_COLLECTION` type, int number of items in this collection numItems) Invoked before writing of a collection.
protected GeometryUtils.Target	Returns: output target that should be used for processing of this collection item. May return this target or an custom sub-target. startCollectionItem(int 0-based index of this item in the collection index, int total number of items in the collection total) Invoked before writing of a collection item.
protected void	startLineString(int number of points in line string numPoints) Invoked before writing a LINESTRING.
protected void	startPoint() Invoked before writing a POINT.
protected void	startPolygon(int number of inner polygons numInner, int number of points in outer polygon numPoints) Invoked before writing a POLYGON.
protected void	startPolygonInner(int number of points in inner polygon numInner) Invoked before writing an inner polygon in POLYGON.

Inherited from java.lang.Object:: clone equals finalize getClass hashCode notify notifyAll toString wait wait wait

Constructor Detail

Target	back to summary
public Target()

Method Detail

addCoordinate

back to summary

protected abstract void addCoordinate(double x, double y, double z, double m, int index, int total)

Invoked to add a coordinate to a geometry.

Parameters

x:double: X coordinate
y:double: Y coordinate
z:double: Z coordinate (NaN if not used)
m:double: M coordinate (NaN if not used)
index:int: 0-based index of coordinate in the current sequence
total:int: total number of coordinates in the current sequence

dimensionSystem

back to summary

protected void dimensionSystem(int dimensionSystem)

Invoked to add dimension system requirement.

Parameters

dimensionSystem:int: dimension system

endCollectionItem back to summary

protected void endCollectionItem(GeometryUtils.Target target, int type, int index, int total)

Invoked after writing of a collection item. This method is invoked on the same target that was used for startCollectionItem(int, int).

Parameters

target:GeometryUtils.Target: the result of startCollectionItem(int, int)
type:int: type of collection
index:int: 0-based index of this item in the collection
total:int: total number of items in the collection

endNonEmptyPolygon	back to summary
protected void endNonEmptyPolygon() Invoked after writing of non-empty POLYGON.

endObject

back to summary

protected void endObject(int type)

Invoked after writing of the object.

Parameters

type:int: type of the object

init

back to summary

protected void init(int srid)

Initializes top-level target.

Parameters

srid:int: SRID

startCollection back to summary

protected void startCollection(int type, int numItems)

Invoked before writing of a collection.

Parameters

type:int: type of collection, one of GeometryUtils#MULTI_POINT, GeometryUtils#MULTI_LINE_STRING, GeometryUtils#MULTI_POLYGON, GeometryUtils#GEOMETRY_COLLECTION
numItems:int: number of items in this collection

startCollectionItem

back to summary

protected GeometryUtils.Target startCollectionItem(int index, int total)

Invoked before writing of a collection item.

Parameters

index:int: 0-based index of this item in the collection
total:int: total number of items in the collection

Returns:GeometryUtils.Target

output target that should be used for processing of this collection item. May return this target or an custom sub-target.

startLineString

back to summary

protected void startLineString(int numPoints)

Invoked before writing a LINESTRING.

Parameters

numPoints:int: number of points in line string

startPoint	back to summary
protected void startPoint() Invoked before writing a POINT.

startPolygon

back to summary

protected void startPolygon(int numInner, int numPoints)

Invoked before writing a POLYGON. If polygon is empty, both parameters are 0.

Parameters

numInner:int: number of inner polygons
numPoints:int: number of points in outer polygon

startPolygonInner

back to summary

protected void startPolygonInner(int numInner)

Invoked before writing an inner polygon in POLYGON.

Parameters

numInner:int: number of points in inner polygon

public final Class GeometryUtils

Nested and Inner Type Summary

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail

public final Class GeometryUtils.DimensionSystemTarget

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail

public final Class GeometryUtils.EnvelopeTarget

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail

public abstract Class GeometryUtils.Target

Constructor Summary

Method Summary

Constructor Detail

Method Detail