SmallRye Common 2.10.0 · io.smallrye.common.resource.MemoryInputStream

Modifier and Type	Field and Description
pack-priv ByteBuffer	buf
private static final ByteBuffer	CLOSED
private static final byte[]	EMPTY_BYTES
pack-priv int	mark

Access	Constructor and Description
public	MemoryInputStream(final ByteBuffer the byte buffer containing the stream data (must not be `null`) buffer) Construct a new instance for a byte buffer.
public	MemoryInputStream(final byte[] the byte array (must not be `null`) bytes) Construct a new instance for a byte array.

Modifier and Type	Method and Description
public int	available() Overrides java.io.InputStream.available. Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected.
private static void	checkClosed(final ByteBuffer buf)
public void	close() Overrides java.io.InputStream.close. Implements java.io.Closeable.close. Closes this input stream and releases any system resources associated with the stream.
public void	mark(final int the maximum limit of bytes that can be read before the mark position becomes invalid. bytes) Overrides java.io.InputStream.mark. Marks the current position in this input stream.
public boolean	markSupported() Overrides java.io.InputStream.markSupported. Tests if this input stream supports the `mark` and `reset` methods.
public int	read() Implements abstract java.io.InputStream.read. Reads the next byte of data from the input stream.
public int	read(final byte[] the buffer into which the data is read. b, final int the start offset in array `b` at which the data is written. off, final int the maximum number of bytes to read. len) Overrides java.io.InputStream.read. Reads up to `len` bytes of data from the input stream into an array of bytes.
public byte[]	readAllBytes() Overrides java.io.InputStream.readAllBytes. Reads all remaining bytes from the input stream.
public void	reset() Overrides java.io.InputStream.reset. Repositions this stream to the position at the time the `mark` method was last called on this input stream.
public long	skip(final long the number of bytes to be skipped. n) Overrides java.io.InputStream.skip. Skips over and discards `n` bytes of data from this input stream.
public long	transferTo(final OutputStream the output stream, non-null out) Overrides java.io.InputStream.transferTo. Reads all bytes from this input stream and writes the bytes to the given output stream in the order that they are read.

buf	back to summary
pack-priv ByteBuffer buf

CLOSED	back to summary
private static final ByteBuffer CLOSED

EMPTY_BYTES	back to summary
private static final byte[] EMPTY_BYTES

mark	back to summary
pack-priv int mark

MemoryInputStream	back to summary
public MemoryInputStream(final ByteBuffer buffer) Construct a new instance for a byte buffer. The given buffer contents are not copied. Consuming the stream will not affect the buffer's position or limit. Modifying the buffer's position or limit will not affect operation of the stream. Parameters buffer:ByteBuffer the byte buffer containing the stream data (must not be `null`)

MemoryInputStream	back to summary
public MemoryInputStream(final byte[] bytes) Construct a new instance for a byte array. The byte array is not copied. Parameters bytes:byte[] the byte array (must not be `null`)

Method Detail

available back to summary

available	back to summary
public int available() Overrides java.io.InputStream.available. Doc from java.io.InputStream.available. Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected. The read might be on the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes. Note that while some implementations of `InputStream` will return the total number of bytes in the stream, many will not. It is never correct to use the return value of this method to allocate a buffer intended to hold all data in this stream. A subclass's implementation of this method may choose to throw an `IOException` if this input stream has been closed by invoking the `close()` method. Returns:int an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking or `0` when it reaches the end of the input stream.

public int available()

Overrides java.io.InputStream.available.

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected. The read might be on the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes.

Note that while some implementations of InputStream will return the total number of bytes in the stream, many will not. It is never correct to use the return value of this method to allocate a buffer intended to hold all data in this stream.

A subclass's implementation of this method may choose to throw an IOException if this input stream has been closed by invoking the close() method.

Returns:int: an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking or 0 when it reaches the end of the input stream.

checkClosed	back to summary
private static void checkClosed(final ByteBuffer buf) throws IOException

close	back to summary
public void close() Overrides java.io.InputStream.close. Implements java.io.Closeable.close. Doc from java.io.InputStream.close. Closes this input stream and releases any system resources associated with the stream.

back to summary

public void close()

Overrides java.io.InputStream.close.

Implements java.io.Closeable.close.

Doc from java.io.InputStream.close.

Closes this input stream and releases any system resources associated with the stream.

mark back to summary

mark	back to summary
public void mark(final int bytes) Overrides java.io.InputStream.mark. Doc from java.io.InputStream.mark. Marks the current position in this input stream. A subsequent call to the `reset` method repositions this stream at the last marked position so that subsequent reads re-read the same bytes. The `readlimit` arguments tells this input stream to allow that many bytes to be read before the mark position gets invalidated. The general contract of `mark` is that, if the method `markSupported` returns `true`, the stream somehow remembers all the bytes read after the call to `mark` and stands ready to supply those same bytes again if and whenever the method `reset` is called. However, the stream is not required to remember any data at all if more than `readlimit` bytes are read from the stream before `reset` is called. Marking a closed stream should not have any effect on the stream. Parameters bytes:int the maximum limit of bytes that can be read before the mark position becomes invalid.

public void mark(final int bytes)

Overrides java.io.InputStream.mark.

Doc from java.io.InputStream.mark.

Marks the current position in this input stream. A subsequent call to the reset method repositions this stream at the last marked position so that subsequent reads re-read the same bytes.

The readlimit arguments tells this input stream to allow that many bytes to be read before the mark position gets invalidated.

The general contract of mark is that, if the method markSupported returns true, the stream somehow remembers all the bytes read after the call to mark and stands ready to supply those same bytes again if and whenever the method reset is called. However, the stream is not required to remember any data at all if more than readlimit bytes are read from the stream before reset is called.

Marking a closed stream should not have any effect on the stream.

Parameters

bytes:int: the maximum limit of bytes that can be read before the mark position becomes invalid.

markSupported back to summary

markSupported	back to summary
public boolean markSupported() Overrides java.io.InputStream.markSupported. Doc from java.io.InputStream.markSupported. Tests if this input stream supports the `mark` and `reset` methods. Whether or not `mark` and `reset` are supported is an invariant property of a particular input stream instance. Returns:boolean `true` if this stream instance supports the mark and reset methods; `false` otherwise.

public boolean markSupported()

Overrides java.io.InputStream.markSupported.

Doc from java.io.InputStream.markSupported.

Tests if this input stream supports the mark and reset methods. Whether or not mark and reset are supported is an invariant property of a particular input stream instance.

Returns:boolean: true if this stream instance supports the mark and reset methods; false otherwise.

read back to summary

read	back to summary
public int read() throws IOException Implements abstract java.io.InputStream.read. Doc from java.io.InputStream.read. Reads the next byte of data from the input stream. The value byte is returned as an `int` in the range `0` to `255`. If no byte is available because the end of the stream has been reached, the value `-1` is returned. This method blocks until input data is available, the end of the stream is detected, or an exception is thrown. Returns:int the next byte of data, or `-1` if the end of the stream is reached. Exceptions IOException: if an I/O error occurs.

public int read() throws IOException

Implements abstract java.io.InputStream.read.

Doc from java.io.InputStream.read.

Reads the next byte of data from the input stream. The value byte is returned as an int in the range 0 to 255. If no byte is available because the end of the stream has been reached, the value -1 is returned. This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

Returns:int

the next byte of data, or -1 if the end of the stream is reached.

Exceptions

IOException:: if an I/O error occurs.

read back to summary

read	back to summary
public int read(final byte[] b, final int off, final int len) throws IOException Overrides java.io.InputStream.read. Doc from java.io.InputStream.read. Reads up to `len` bytes of data from the input stream into an array of bytes. An attempt is made to read as many as `len` bytes, but a smaller number may be read. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown. If `len` is zero, then no bytes are read and `0` is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value `-1` is returned; otherwise, at least one byte is read and stored into `b`. The first byte read is stored into element `b[off]`, the next one into `b[off+1]`, and so on. The number of bytes read is, at most, equal to `len`. Let k be the number of bytes actually read; these bytes will be stored in elements `b[off]` through `b[off+`k`-1]`, leaving elements `b[off+`k`]` through `b[off+len-1]` unaffected. In every case, elements `b[0]` through `b[off-1]` and elements `b[off+len]` through `b[b.length-1]` are unaffected. Parameters b:byte[] the buffer into which the data is read. off:int the start offset in array `b` at which the data is written. len:int the maximum number of bytes to read. Returns:int the total number of bytes read into the buffer, or `-1` if there is no more data because the end of the stream has been reached. Exceptions IOException: If the first byte cannot be read for any reason other than end of file, or if the input stream has been closed, or if some other I/O error occurs.

public int read(final byte[] b, final int off, final int len) throws IOException

Overrides java.io.InputStream.read.

Doc from java.io.InputStream.read.

Reads up to len bytes of data from the input stream into an array of bytes. An attempt is made to read as many as len bytes, but a smaller number may be read. The number of bytes actually read is returned as an integer.

This method blocks until input data is available, end of file is detected, or an exception is thrown.

If len is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[off], the next one into b[off+1], and so on. The number of bytes read is, at most, equal to len. Let k be the number of bytes actually read; these bytes will be stored in elements b[off] through b[off+k-1], leaving elements b[off+k] through b[off+len-1] unaffected.

In every case, elements b[0] through b[off-1] and elements b[off+len] through b[b.length-1] are unaffected.

Parameters

b:byte[]: the buffer into which the data is read.
off:int: the start offset in array b at which the data is written.
len:int: the maximum number of bytes to read.

Returns:int

the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.

Exceptions

IOException:: If the first byte cannot be read for any reason other than end of file, or if the input stream has been closed, or if some other I/O error occurs.

readAllBytes	back to summary
public byte[] readAllBytes() throws IOException Overrides java.io.InputStream.readAllBytes. Doc from java.io.InputStream.readAllBytes. Reads all remaining bytes from the input stream. This method blocks until all remaining bytes have been read and end of stream is detected, or an exception is thrown. This method does not close the input stream. When this stream reaches end of stream, further invocations of this method will return an empty byte array. Note that this method is intended for simple cases where it is convenient to read all bytes into a byte array. It is not intended for reading input streams with large amounts of data. The behavior for the case where the input stream is asynchronously closed, or the thread interrupted during the read, is highly input stream specific, and therefore not specified. If an I/O error occurs reading from the input stream, then it may do so after some, but not all, bytes have been read. Consequently the input stream may not be at end of stream and may be in an inconsistent state. It is strongly recommended that the stream be promptly closed if an I/O error occurs. Returns:byte[] a byte array containing the bytes read from this input stream Exceptions IOException: if an I/O error occurs

readAllBytes

back to summary

public byte[] readAllBytes() throws IOException

Overrides java.io.InputStream.readAllBytes.

Doc from java.io.InputStream.readAllBytes.

Reads all remaining bytes from the input stream. This method blocks until all remaining bytes have been read and end of stream is detected, or an exception is thrown. This method does not close the input stream.

When this stream reaches end of stream, further invocations of this method will return an empty byte array.

Note that this method is intended for simple cases where it is convenient to read all bytes into a byte array. It is not intended for reading input streams with large amounts of data.

The behavior for the case where the input stream is asynchronously closed, or the thread interrupted during the read, is highly input stream specific, and therefore not specified.

If an I/O error occurs reading from the input stream, then it may do so after some, but not all, bytes have been read. Consequently the input stream may not be at end of stream and may be in an inconsistent state. It is strongly recommended that the stream be promptly closed if an I/O error occurs.

Returns:byte[]

a byte array containing the bytes read from this input stream

Exceptions

IOException:: if an I/O error occurs

reset back to summary

reset	back to summary
public void reset() throws IOException Overrides java.io.InputStream.reset. Doc from java.io.InputStream.reset. Repositions this stream to the position at the time the `mark` method was last called on this input stream. The general contract of `reset` is: If the method `markSupported` returns `true`, then: If the method `mark` has not been called since the stream was created, or the number of bytes read from the stream since `mark` was last called is larger than the argument to `mark` at that last call, then an `IOException` might be thrown. If such an `IOException` is not thrown, then the stream is reset to a state such that all the bytes read since the most recent call to `mark` (or since the start of the file, if `mark` has not been called) will be resupplied to subsequent callers of the `read` method, followed by any bytes that otherwise would have been the next input data as of the time of the call to `reset`. If the method `markSupported` returns `false`, then: The call to `reset` may throw an `IOException`. If an `IOException` is not thrown, then the stream is reset to a fixed state that depends on the particular type of the input stream and how it was created. The bytes that will be supplied to subsequent callers of the `read` method depend on the particular type of the input stream. Exceptions IOException: if this stream has not been marked or if the mark has been invalidated.

public void reset() throws IOException

Overrides java.io.InputStream.reset.

Doc from java.io.InputStream.reset.

Repositions this stream to the position at the time the mark method was last called on this input stream.

The general contract of reset is:

If the method markSupported returns true, then:
- If the method mark has not been called since the stream was created, or the number of bytes read from the stream since mark was last called is larger than the argument to mark at that last call, then an IOException might be thrown.
- If such an IOException is not thrown, then the stream is reset to a state such that all the bytes read since the most recent call to mark (or since the start of the file, if mark has not been called) will be resupplied to subsequent callers of the read method, followed by any bytes that otherwise would have been the next input data as of the time of the call to reset.
If the method markSupported returns false, then:
- The call to reset may throw an IOException.
- If an IOException is not thrown, then the stream is reset to a fixed state that depends on the particular type of the input stream and how it was created. The bytes that will be supplied to subsequent callers of the read method depend on the particular type of the input stream.

Exceptions

IOException:: if this stream has not been marked or if the mark has been invalidated.

skip back to summary

skip	back to summary
public long skip(final long n) throws IOException Overrides java.io.InputStream.skip. Doc from java.io.InputStream.skip. Skips over and discards `n` bytes of data from this input stream. The `skip` method may, for a variety of reasons, end up skipping over some smaller number of bytes, possibly `0`. This may result from any of a number of conditions; reaching end of file before `n` bytes have been skipped is only one possibility. The actual number of bytes skipped is returned. If `n` is negative, the `skip` method for class `InputStream` always returns 0, and no bytes are skipped. Subclasses may handle the negative value differently. Parameters n:long the number of bytes to be skipped. Returns:long the actual number of bytes skipped which might be zero. Exceptions IOException: if an I/O error occurs.

public long skip(final long n) throws IOException

Overrides java.io.InputStream.skip.

Doc from java.io.InputStream.skip.

Skips over and discards n bytes of data from this input stream. The skip method may, for a variety of reasons, end up skipping over some smaller number of bytes, possibly 0. This may result from any of a number of conditions; reaching end of file before n bytes have been skipped is only one possibility. The actual number of bytes skipped is returned. If n is negative, the skip method for class InputStream always returns 0, and no bytes are skipped. Subclasses may handle the negative value differently.

Parameters

n:long: the number of bytes to be skipped.

Returns:long

the actual number of bytes skipped which might be zero.

Exceptions

IOException:: if an I/O error occurs.

transferTo back to summary

transferTo	back to summary
public long transferTo(final OutputStream out) throws IOException Overrides java.io.InputStream.transferTo. Doc from java.io.InputStream.transferTo. Reads all bytes from this input stream and writes the bytes to the given output stream in the order that they are read. On return, this input stream will be at end of stream. This method does not close either stream. This method may block indefinitely reading from the input stream, or writing to the output stream. The behavior for the case where the input and/or output stream is asynchronously closed, or the thread interrupted during the transfer, is highly input and output stream specific, and therefore not specified. If the total number of bytes transferred is greater than Long#MAX_VALUE, then `Long.MAX_VALUE` will be returned. If an I/O error occurs reading from the input stream or writing to the output stream, then it may do so after some bytes have been read or written. Consequently the input stream may not be at end of stream and one, or both, streams may be in an inconsistent state. It is strongly recommended that both streams be promptly closed if an I/O error occurs. Parameters out:OutputStream the output stream, non-null Returns:long the number of bytes transferred Exceptions IOException: if an I/O error occurs when reading or writing

public long transferTo(final OutputStream out) throws IOException

Overrides java.io.InputStream.transferTo.

Doc from java.io.InputStream.transferTo.

Reads all bytes from this input stream and writes the bytes to the given output stream in the order that they are read. On return, this input stream will be at end of stream. This method does not close either stream.

This method may block indefinitely reading from the input stream, or writing to the output stream. The behavior for the case where the input and/or output stream is asynchronously closed, or the thread interrupted during the transfer, is highly input and output stream specific, and therefore not specified.

If the total number of bytes transferred is greater than Long#MAX_VALUE, then Long.MAX_VALUE will be returned.

If an I/O error occurs reading from the input stream or writing to the output stream, then it may do so after some bytes have been read or written. Consequently the input stream may not be at end of stream and one, or both, streams may be in an inconsistent state. It is strongly recommended that both streams be promptly closed if an I/O error occurs.

Parameters

out:OutputStream: the output stream, non-null

Returns:long

the number of bytes transferred

Exceptions

IOException:: if an I/O error occurs when reading or writing

public final Class MemoryInputStream

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail