Implements org.xnio.channels.SuspendableWriteChannel.awaitWritable.

Doc from org.xnio.channels.SuspendableWriteChannel.awaitWritable.

Block until this channel becomes writable again. This method may return spuriously before the channel becomes writable.

Annotations

@Override

Exceptions

IOException:

if an I/O error occurs

Implements org.xnio.channels.SuspendableWriteChannel.awaitWritable.

Doc from org.xnio.channels.SuspendableWriteChannel.awaitWritable.

Block until this channel becomes writable again, or until the timeout expires. This method may return spuriously before the channel becomes writable or the timeout expires.

Parameters

time:long

the time to wait

timeUnit:TimeUnit

the time unit

Annotations

@Override

Exceptions

IOException:

if an I/O error occurs

Implements java.nio.channels.Channel.close, org.xnio.channels.SuspendableWriteChannel.close.

Doc from org.xnio.channels.SuspendableWriteChannel.close.

Close this channel. If data has been written but not flushed, that data may be discarded, depending on the channel implementation. When a channel is closed, its close listener is invoked. Invoking this method more than once has no additional effect.

Annotations

@Override

Exceptions

IOException:

if the close failed

Implements org.xnio.channels.SuspendableWriteChannel.flush.

Doc from org.xnio.channels.SuspendableWriteChannel.flush.

Flush any waiting partial send or write. If there is no data to flush, or if the flush completed successfully, this method will return true. If there is data to flush which cannot be immediately written, this method will return false. If this method returns true after shutdownWrites() was called on this channel, the write listener will no longer be invoked on this channel. If this is case and additionally this is a write-only channel or the read side was previously shut down, then the channel will automatically be closed.

Returns:boolean

true if the message was flushed, or false if the result would block

Annotations

@Override

Exceptions

IOException:

if an I/O error occurs

Implements org.xnio.channels.StreamSinkChannel.getCloseSetter.

Doc from org.xnio.channels.StreamSinkChannel.getCloseSetter.

Get the setter which can be used to change the close listener for this channel. If the channel is already closed, then the listener will not be called.

Returns:ChannelListener.Setter<? extends StreamSinkChannel>

Doc from org.xnio.channels.CloseableChannel.getCloseSetter.

the setter

Annotations

@Override

Implements org.xnio.channels.CloseableChannel.getIoThread.

Doc from org.xnio.channels.CloseableChannel.getIoThread.

Get the I/O thread associated with this channel.

Returns:XnioIoThread

the I/O thread associated with this channel

Annotations

@Override

Implements org.xnio.channels.Configurable.getOption.

Doc from org.xnio.channels.Configurable.getOption.

Get the value of a channel option.

Parameters

<T>

the type of the option value

option:Option<T>

the option to get

Returns:T

the value of the option, or null if it is not set

Annotations

@Override

Exceptions

IOException:

if an I/O error occurred when reading the option

Implements org.xnio.channels.CloseableChannel.getWorker.

Doc from org.xnio.channels.CloseableChannel.getWorker.

Get the worker for this channel.

Returns:XnioWorker

the worker

Annotations

@Override

Implements org.xnio.channels.StreamSinkChannel.getWriteSetter.

Doc from org.xnio.channels.StreamSinkChannel.getWriteSetter.

Get the setter which can be used to change the write listener for this channel.

Returns:ChannelListener.Setter<? extends StreamSinkChannel>

Doc from org.xnio.channels.SuspendableWriteChannel.getWriteSetter.

the setter

Annotations

@Override

Implements org.xnio.channels.SuspendableWriteChannel.getWriteThread.

Doc from org.xnio.channels.SuspendableWriteChannel.getWriteThread.

Get the write thread for this channel.

Returns:XnioExecutor

the thread, or null if none is configured or available

Annotations

@Override

Implements java.nio.channels.Channel.isOpen, org.xnio.channels.SuspendableWriteChannel.isOpen.

Doc from org.xnio.channels.SuspendableWriteChannel.isOpen.

Determine whether this channel is open. This method will return false if all directions are shut down, even if there is unflushed write data pending.

Returns:boolean

true if the channel is open, false otherwise

Annotations

@Override

Implements org.xnio.channels.SuspendableWriteChannel.isWriteResumed.

Doc from org.xnio.channels.SuspendableWriteChannel.isWriteResumed.

Determine whether writes are resumed.

Returns:boolean

true if writes are resumed, false if writes are suspended

Annotations

@Override

Implements org.xnio.channels.SuspendableWriteChannel.resumeWrites.

Doc from org.xnio.channels.SuspendableWriteChannel.resumeWrites.

Resume writes on this channel. The write listener will be called as soon as the channel becomes writable.

Annotations

@Override

Implements org.xnio.channels.Configurable.setOption.

Doc from org.xnio.channels.Configurable.setOption.

Set an option for this channel. Unsupported options are ignored.

Parameters

<T>

the type of the option value

option:Option<T>

the option to set

value:T

the value of the option to set

Returns:T

the previous option value, if any

Annotations

@Override

Exceptions

IllegalArgumentException:

if the value is not acceptable for this option

IOException:

if an I/O error occurred when modifying the option

Implements org.xnio.channels.SuspendableWriteChannel.shutdownWrites.

Doc from org.xnio.channels.SuspendableWriteChannel.shutdownWrites.

Indicate that writing is complete for this channel. Further attempts to write data to this channel after this method is invoked will result in an exception. If this method was already called, calling this method again will have no additional effect. After this method is called, any remaining data still must be flushed out via the flush() method; once this is done, if the read side of the channel was shut down, the channel will automatically close.

Annotations

@Override

Exceptions

IOException:

if an I/O error occurs

Implements org.xnio.channels.Configurable.supportsOption.

Doc from org.xnio.channels.Configurable.supportsOption.

Determine whether an option is supported on this channel.

Parameters

option:Option<?>

the option

Returns:boolean

true if it is supported

Annotations

@Override

Implements org.xnio.channels.SuspendableWriteChannel.suspendWrites.

Doc from org.xnio.channels.SuspendableWriteChannel.suspendWrites.

Suspend further write notifications on this channel.

Annotations

@Override

Implements org.xnio.channels.StreamSinkChannel.transferFrom.

Doc from org.xnio.channels.StreamSinkChannel.transferFrom.

Transfer bytes into this channel from the given file. Using this method in preference to FileChannel#transferTo(long, long, WritableByteChannel) may provide a performance advantage on some platforms.

If the current thread is interrupted when this method is called, it may throw a java.io.InterruptedIOException; however, if this exception is thrown, the java.io.InterruptedIOException#bytesTransferred field is guaranteed to be 0.

Parameters

src:FileChannel

the file to read from

position:long

the position within the file from which the transfer is to begin

count:long

the number of bytes to be transferred

Returns:long

the number of bytes (possibly 0) that were actually transferred

Annotations

@Override

Exceptions

IOException:

if an I/O error occurs

Implements org.xnio.channels.StreamSinkChannel.transferFrom.

Doc from org.xnio.channels.StreamSinkChannel.transferFrom.

Transfers bytes from the given channel source. On some platforms, this may avoid copying bytes between user and kernel space. On other platforms, bytes are passed through the throughBuffer parameter's buffer space. On entry, throughBuffer will be cleared. On exit, the buffer will be flipped for emptying, and may be empty or may contain data. If this method returns a value less than count, then the remaining data in throughBuffer may contain data read from source which must be written to this channel to complete the operation. Note that using a direct buffer may provide an intermediate performance gain on platforms without zero-copy facilities.

If the current thread is interrupted when this method is called, it may throw a java.io.InterruptedIOException; however, if this exception is thrown, the java.io.InterruptedIOException#bytesTransferred field is guaranteed to be 0.

Parameters

source:StreamSourceChannel

the source to read from

count:long

the number of bytes to be transferred

throughBuffer:ByteBuffer

the buffer to copy through.

Returns:long

the number of bytes (possibly 0) that were actually transferred, or -1 if the end of input was reached

Annotations

@Override

Exceptions

IOException:

if an I/O error occurs

Implements org.xnio.channels.SuspendableWriteChannel.wakeupWrites.

Doc from org.xnio.channels.SuspendableWriteChannel.wakeupWrites.

Resume writes on this channel, and force the write listener to be triggered even if the channel isn't actually writable.

Annotations

@Override

Implements java.nio.channels.GatheringByteChannel.write.

Doc from java.nio.channels.GatheringByteChannel.write.

Writes a sequence of bytes to this channel from a subsequence of the given buffers.

An attempt is made to write up to r bytes to this channel, where r is the total number of bytes remaining in the specified subsequence of the given buffer array, that is,

srcs[offset].remaining()
    + srcs[offset+1].remaining()
    + ... + srcs[offset+length-1].remaining()

Suppose that a byte sequence of length n is written, where 0 <= n <= r. Up to the first srcs[offset].remaining() bytes of this sequence are written from buffer srcs[offset], up to the next srcs[offset+1].remaining() bytes are written from buffer srcs[offset+1], and so forth, until the entire byte sequence is written. As many bytes as possible are written from each buffer, hence the final position of each updated buffer, except the last updated buffer, is guaranteed to be equal to that buffer's limit.

Unless otherwise specified, a write operation will return only after writing all of the r requested bytes. Some types of channels, depending upon their state, may write only some of the bytes or possibly none at all. A socket channel in non-blocking mode, for example, cannot write any more bytes than are free in the socket's output buffer.

This method may be invoked at any time. If another thread has already initiated a write operation upon this channel, however, then an invocation of this method will block until the first operation is complete.

Parameters

srcs:ByteBuffer[]

The buffers from which bytes are to be retrieved

offset:int

The offset within the buffer array of the first buffer from which bytes are to be retrieved; must be non-negative and no larger than srcs.length

length:int

The maximum number of buffers to be accessed; must be non-negative and no larger than srcs.length - offset

Returns:long

The number of bytes written, possibly zero

Annotations

@Override

Exceptions

IOException:

If some other I/O error occurs

Implements java.nio.channels.GatheringByteChannel.write.

Doc from java.nio.channels.GatheringByteChannel.write.

Writes a sequence of bytes to this channel from the given buffers.

An invocation of this method of the form c.write(srcs) behaves in exactly the same manner as the invocation

c.write(srcs, 0, srcs.length);

Parameters

srcs:ByteBuffer[]

The buffers from which bytes are to be retrieved

Returns:long

The number of bytes written, possibly zero

Annotations

@Override

Exceptions

IOException:

If some other I/O error occurs

Implements java.nio.channels.WritableByteChannel.write.

Doc from java.nio.channels.WritableByteChannel.write.

Writes a sequence of bytes to this channel from the given buffer.

An attempt is made to write up to r bytes to the channel, where r is the number of bytes remaining in the buffer, that is, src.remaining(), at the moment this method is invoked.

Suppose that a byte sequence of length n is written, where 0 <= n <= r. This byte sequence will be transferred from the buffer starting at index p, where p is the buffer's position at the moment this method is invoked; the index of the last byte written will be p + n - 1. Upon return the buffer's position will be equal to p + n; its limit will not have changed.

Unless otherwise specified, a write operation will return only after writing all of the r requested bytes. Some types of channels, depending upon their state, may write only some of the bytes or possibly none at all. A socket channel in non-blocking mode, for example, cannot write any more bytes than are free in the socket's output buffer.

This method may be invoked at any time. If another thread has already initiated a write operation upon this channel, however, then an invocation of this method will block until the first operation is complete.

Parameters

src:ByteBuffer

The buffer from which bytes are to be retrieved

Returns:int

The number of bytes written, possibly zero

Annotations

@Override

Exceptions

IOException:

If some other I/O error occurs

Implements org.xnio.channels.StreamSinkChannel.writeFinal.

Doc from org.xnio.channels.StreamSinkChannel.writeFinal.

Writes some data to the channel, with the same semantics as write(java.nio.ByteBuffer). If all the data is written out then the channel will have its writes shutdown. Semantically this method is equivalent to: int rem = src.remaining(); int written = channel.write(src); if(written == rem) { channel.shutdownWrites() } If an exception is thrown the caller is still responsible for closing the channel.

Parameters

src:ByteBuffer

The data to write

Returns:int

The amount of data that was actually written.

Annotations

@Override

Implements org.xnio.channels.StreamSinkChannel.writeFinal.

Doc from org.xnio.channels.StreamSinkChannel.writeFinal.

Writes some data to the channel, with the same semantics as write(java.nio.ByteBuffer[], int, int). If all the data is written out then the channel will have its writes shutdown. If an exception is thrown the caller is still responsible for closing the channel.

Parameters

srcs:ByteBuffer[]

The buffers from which bytes are to be retrieved

offset:int

The offset within the buffer array of the first buffer from which bytes are to be retrieved; must be non-negative and no larger than srcs.length

length:int

The maximum number of buffers to be accessed; must be non-negative and no larger than srcs.length - offset

Returns:long

The amount of data that was actually written

Annotations

@Override

Implements org.xnio.channels.StreamSinkChannel.writeFinal.

Doc from org.xnio.channels.StreamSinkChannel.writeFinal.

Writes some data to the channel, with the same semantics as write(java.nio.ByteBuffer[]). If all the data is written out then the channel will have its writes shutdown. If an exception is thrown the caller is still responsible for closing the channel.

Parameters

srcs:ByteBuffer[]

The buffers from which bytes are to be retrieved

Returns:long

The amount of data that was actually written

Annotations

@Override