Standard Widget Toolkit for GTK 3.125.0 · org.eclipse.swt.layout.GridData

Field Summary

Modifier and Type	Field and Description
public static final int	BEGINNING Value for horizontalAlignment or verticalAlignment.
pack-priv int	cacheHeight
pack-priv int	cacheWidth
public static final int	CENTER Value for horizontalAlignment or verticalAlignment.
pack-priv int	currentHeight
pack-priv int	currentHhint
pack-priv int	currentWhint
pack-priv int	currentWidth
pack-priv int	defaultHeight
pack-priv int	defaultHhint
pack-priv int	defaultWhint
pack-priv int	defaultWidth
public static final int	END Value for horizontalAlignment or verticalAlignment.
public boolean	exclude exclude informs the layout to ignore this control when sizing and positioning controls.
public static final int	FILL Value for horizontalAlignment or verticalAlignment.
public static final int	FILL_BOTH Style bit for `new GridData(int)` to resize the control to fill the cell horizontally and vertically and to fit the remaining horizontal and vertical space.
public static final int	FILL_HORIZONTAL Style bit for `new GridData(int)` to resize the control to fill the cell horizontally and to fit the remaining horizontal space.
public static final int	FILL_VERTICAL Style bit for `new GridData(int)` to resize the control to fill the cell vertically and to fit the remaining vertical space.
public static final int	GRAB_HORIZONTAL Style bit for `new GridData(int)` to resize the control to fit the remaining horizontal space.
public static final int	GRAB_VERTICAL Style bit for `new GridData(int)` to resize the control to fit the remaining vertical space.
public boolean	grabExcessHorizontalSpace grabExcessHorizontalSpace specifies whether the width of the cell changes depending on the size of the parent Composite.
public boolean	grabExcessVerticalSpace grabExcessVerticalSpace specifies whether the height of the cell changes depending on the size of the parent Composite.
public int	heightHint heightHint specifies the preferred height in points.
public static final int	HORIZONTAL_ALIGN_BEGINNING Style bit for `new GridData(int)` to position the control at the left of the cell.
public static final int	HORIZONTAL_ALIGN_CENTER Style bit for `new GridData(int)` to position the control in the horizontal center of the cell.
public static final int	HORIZONTAL_ALIGN_END Style bit for `new GridData(int)` to position the control at the right of the cell.
public static final int	HORIZONTAL_ALIGN_FILL Style bit for `new GridData(int)` to resize the control to fill the cell horizontally.
public int	horizontalAlignment horizontalAlignment specifies how controls will be positioned horizontally within a cell.
public int	horizontalIndent horizontalIndent specifies the number of points of indentation that will be placed along the left side of the cell.
public int	horizontalSpan horizontalSpan specifies the number of column cells that the control will take up.
public int	minimumHeight minimumHeight specifies the minimum height in points.
public int	minimumWidth minimumWidth specifies the minimum width in points.
public static final int	VERTICAL_ALIGN_BEGINNING Style bit for `new GridData(int)`.
public static final int	VERTICAL_ALIGN_CENTER Style bit for `new GridData(int)` to position the control in the vertical center of the cell.
public static final int	VERTICAL_ALIGN_END Style bit for `new GridData(int)` to position the control at the bottom of the cell.
public static final int	VERTICAL_ALIGN_FILL Style bit for `new GridData(int)` to resize the control to fill the cell vertically.
public int	verticalAlignment verticalAlignment specifies how controls will be positioned vertically within a cell.
public int	verticalIndent verticalIndent specifies the number of points of indentation that will be placed along the top side of the cell.
public int	verticalSpan verticalSpan specifies the number of row cells that the control will take up.
public int	widthHint widthHint specifies the preferred width in points.

Constructor Summary

Access	Constructor and Description
public	GridData() Constructs a new instance of GridData using default values.
public	GridData(int the GridData style style) Constructs a new instance based on the GridData style.
public	GridData(int how control will be positioned horizontally within a cell, one of: SWT.BEGINNING (or SWT.LEFT), SWT.CENTER, SWT.END (or SWT.RIGHT), or SWT.FILL horizontalAlignment, int how control will be positioned vertically within a cell, one of: SWT.BEGINNING (or SWT.TOP), SWT.CENTER, SWT.END (or SWT.BOTTOM), or SWT.FILL verticalAlignment, boolean whether cell will be made wide enough to fit the remaining horizontal space grabExcessHorizontalSpace, boolean whether cell will be made high enough to fit the remaining vertical space grabExcessVerticalSpace) Constructs a new instance of GridData according to the parameters.
public	GridData(int how control will be positioned horizontally within a cell, one of: SWT.BEGINNING (or SWT.LEFT), SWT.CENTER, SWT.END (or SWT.RIGHT), or SWT.FILL horizontalAlignment, int how control will be positioned vertically within a cell, one of: SWT.BEGINNING (or SWT.TOP), SWT.CENTER, SWT.END (or SWT.BOTTOM), or SWT.FILL verticalAlignment, boolean whether cell will be made wide enough to fit the remaining horizontal space grabExcessHorizontalSpace, boolean whether cell will be made high enough to fit the remaining vertical space grabExcessVerticalSpace, int the number of column cells that the control will take up horizontalSpan, int the number of row cells that the control will take up verticalSpan) Constructs a new instance of GridData according to the parameters.
public	GridData(int a minimum width for the column width, int a minimum height for the row height) Constructs a new instance of GridData according to the parameters.

Method Summary

Modifier and Type	Method and Description
pack-priv void	computeSize(Control control, int wHint, int hHint, boolean flushCache)
pack-priv void	flushCache()
pack-priv String	getName()
public String	Returns: a string representation of the GridData object toString() Overrides java.lang.Object.toString. Returns a string containing a concise, human-readable description of the receiver.

Inherited from java.lang.Object:: clone equals finalize getClass hashCode notify notifyAll wait wait wait

Field Detail

BEGINNING	back to summary
public static final int BEGINNING Value for horizontalAlignment or verticalAlignment. Position the control at the top or left of the cell. Not recommended. Use SWT.BEGINNING, SWT.TOP or SWT.LEFT instead.

cacheHeight	back to summary
pack-priv int cacheHeight

cacheWidth	back to summary
pack-priv int cacheWidth

CENTER	back to summary
public static final int CENTER Value for horizontalAlignment or verticalAlignment. Position the control in the vertical or horizontal center of the cell Not recommended. Use SWT.CENTER instead.

currentHeight	back to summary
pack-priv int currentHeight

currentHhint	back to summary
pack-priv int currentHhint

currentWhint	back to summary
pack-priv int currentWhint

currentWidth	back to summary
pack-priv int currentWidth

defaultHeight	back to summary
pack-priv int defaultHeight

defaultHhint	back to summary
pack-priv int defaultHhint

defaultWhint	back to summary
pack-priv int defaultWhint

defaultWidth	back to summary
pack-priv int defaultWidth

END	back to summary
public static final int END Value for horizontalAlignment or verticalAlignment. Position the control at the bottom or right of the cell Not recommended. Use SWT.END, SWT.BOTTOM or SWT.RIGHT instead.

exclude back to summary

exclude	back to summary
public boolean exclude exclude informs the layout to ignore this control when sizing and positioning controls. If this value is `true`, the size and position of the control will not be managed by the layout. If this value is `false`, the size and position of the control will be computed and assigned. The default value is `false`. Since 3.1

public boolean exclude

exclude informs the layout to ignore this control when sizing and positioning controls. If this value is true, the size and position of the control will not be managed by the layout. If this value is false, the size and position of the control will be computed and assigned. The default value is false.

Since: 3.1

FILL	back to summary
public static final int FILL Value for horizontalAlignment or verticalAlignment. Resize the control to fill the cell horizontally or vertically. Not recommended. Use SWT.FILL instead.

FILL_BOTH	back to summary
public static final int FILL_BOTH Style bit for `new GridData(int)` to resize the control to fill the cell horizontally and vertically and to fit the remaining horizontal and vertical space. FILL_BOTH = FILL_VERTICAL \| FILL_HORIZONTAL Not recommended. Use `new GridData(SWT.FILL, SWT.FILL, true, true)` instead.

FILL_HORIZONTAL	back to summary
public static final int FILL_HORIZONTAL Style bit for `new GridData(int)` to resize the control to fill the cell horizontally and to fit the remaining horizontal space. FILL_HORIZONTAL = HORIZONTAL_ALIGN_FILL \| GRAB_HORIZONTAL Not recommended. Use `new GridData(SWT.FILL, int, true, boolean)` instead.

FILL_VERTICAL	back to summary
public static final int FILL_VERTICAL Style bit for `new GridData(int)` to resize the control to fill the cell vertically and to fit the remaining vertical space. FILL_VERTICAL = VERTICAL_ALIGN_FILL \| GRAB_VERTICAL Not recommended. Use `new GridData(int, SWT.FILL, boolean, true)` instead.

GRAB_HORIZONTAL	back to summary
public static final int GRAB_HORIZONTAL Style bit for `new GridData(int)` to resize the control to fit the remaining horizontal space. Not recommended. Use `new GridData(int, int, true, boolean)` instead.

GRAB_VERTICAL	back to summary
public static final int GRAB_VERTICAL Style bit for `new GridData(int)` to resize the control to fit the remaining vertical space. Not recommended. Use `new GridData(int, int, boolean, true)` instead.

grabExcessHorizontalSpace back to summary

grabExcessHorizontalSpace	back to summary
public boolean grabExcessHorizontalSpace grabExcessHorizontalSpace specifies whether the width of the cell changes depending on the size of the parent Composite. If grabExcessHorizontalSpace is `true`, the following rules apply to the width of the cell: If extra horizontal space is available in the parent, the cell will grow to be wider than its preferred width. The new width will be "preferred width + delta" where delta is the extra horizontal space divided by the number of grabbing columns. If there is not enough horizontal space available in the parent, the cell will shrink until it reaches its minimum width as specified by GridData.minimumWidth. The new width will be the maximum of "minimumWidth" and "preferred width - delta", where delta is the amount of space missing divided by the number of grabbing columns. If the parent is packed, the cell will be its preferred width as specified by GridData.widthHint. If the control spans multiple columns and there are no other grabbing controls in any of the spanned columns, the last column in the span will grab the extra space. If there is at least one other grabbing control in the span, the grabbing will be spread over the columns already marked as grabExcessHorizontalSpace. The default value is false. See Also `GridData#minimumWidth`, `GridData#widthHint`

public boolean grabExcessHorizontalSpace

grabExcessHorizontalSpace specifies whether the width of the cell changes depending on the size of the parent Composite. If grabExcessHorizontalSpace is true, the following rules apply to the width of the cell:

If extra horizontal space is available in the parent, the cell will grow to be wider than its preferred width. The new width will be "preferred width + delta" where delta is the extra horizontal space divided by the number of grabbing columns.
If there is not enough horizontal space available in the parent, the cell will shrink until it reaches its minimum width as specified by GridData.minimumWidth. The new width will be the maximum of "minimumWidth" and "preferred width - delta", where delta is the amount of space missing divided by the number of grabbing columns.
If the parent is packed, the cell will be its preferred width as specified by GridData.widthHint.
If the control spans multiple columns and there are no other grabbing controls in any of the spanned columns, the last column in the span will grab the extra space. If there is at least one other grabbing control in the span, the grabbing will be spread over the columns already marked as grabExcessHorizontalSpace.

The default value is false.

See Also: GridData#minimumWidth, GridData#widthHint

grabExcessVerticalSpace back to summary

grabExcessVerticalSpace	back to summary
public boolean grabExcessVerticalSpace grabExcessVerticalSpace specifies whether the height of the cell changes depending on the size of the parent Composite. If grabExcessVerticalSpace is `true`, the following rules apply to the height of the cell: If extra vertical space is available in the parent, the cell will grow to be taller than its preferred height. The new height will be "preferred height + delta" where delta is the extra vertical space divided by the number of grabbing rows. If there is not enough vertical space available in the parent, the cell will shrink until it reaches its minimum height as specified by GridData.minimumHeight. The new height will be the maximum of "minimumHeight" and "preferred height - delta", where delta is the amount of space missing divided by the number of grabbing rows. If the parent is packed, the cell will be its preferred height as specified by GridData.heightHint. If the control spans multiple rows and there are no other grabbing controls in any of the spanned rows, the last row in the span will grab the extra space. If there is at least one other grabbing control in the span, the grabbing will be spread over the rows already marked as grabExcessVerticalSpace. The default value is false. See Also `GridData#minimumHeight`, `GridData#heightHint`

public boolean grabExcessVerticalSpace

grabExcessVerticalSpace specifies whether the height of the cell changes depending on the size of the parent Composite. If grabExcessVerticalSpace is true, the following rules apply to the height of the cell:

If extra vertical space is available in the parent, the cell will grow to be taller than its preferred height. The new height will be "preferred height + delta" where delta is the extra vertical space divided by the number of grabbing rows.
If there is not enough vertical space available in the parent, the cell will shrink until it reaches its minimum height as specified by GridData.minimumHeight. The new height will be the maximum of "minimumHeight" and "preferred height - delta", where delta is the amount of space missing divided by the number of grabbing rows.
If the parent is packed, the cell will be its preferred height as specified by GridData.heightHint.
If the control spans multiple rows and there are no other grabbing controls in any of the spanned rows, the last row in the span will grab the extra space. If there is at least one other grabbing control in the span, the grabbing will be spread over the rows already marked as grabExcessVerticalSpace.

The default value is false.

See Also: GridData#minimumHeight, GridData#heightHint

heightHint back to summary

heightHint	back to summary
public int heightHint heightHint specifies the preferred height in points. This value is the hHint passed into Control.computeSize(int, int, boolean) to determine the preferred size of the control. The default value is SWT.DEFAULT. See Also `Control#computeSize(int, int, boolean)`

public int heightHint

heightHint specifies the preferred height in points. This value is the hHint passed into Control.computeSize(int, int, boolean) to determine the preferred size of the control. The default value is SWT.DEFAULT.

See Also: Control#computeSize(int, int, boolean)

HORIZONTAL_ALIGN_BEGINNING	back to summary
public static final int HORIZONTAL_ALIGN_BEGINNING Style bit for `new GridData(int)` to position the control at the left of the cell. Not recommended. Use `new GridData(SWT.BEGINNING, int, boolean, boolean)` instead.

HORIZONTAL_ALIGN_CENTER	back to summary
public static final int HORIZONTAL_ALIGN_CENTER Style bit for `new GridData(int)` to position the control in the horizontal center of the cell. Not recommended. Use `new GridData(SWT.CENTER, int, boolean, boolean)` instead.

HORIZONTAL_ALIGN_END	back to summary
public static final int HORIZONTAL_ALIGN_END Style bit for `new GridData(int)` to position the control at the right of the cell. Not recommended. Use `new GridData(SWT.END, int, boolean, boolean)` instead.

HORIZONTAL_ALIGN_FILL	back to summary
public static final int HORIZONTAL_ALIGN_FILL Style bit for `new GridData(int)` to resize the control to fill the cell horizontally. Not recommended. Use `new GridData(SWT.FILL, int, boolean, boolean)` instead.

horizontalAlignment	back to summary
public int horizontalAlignment horizontalAlignment specifies how controls will be positioned horizontally within a cell. The default value is BEGINNING. Possible values are: SWT.BEGINNING (or SWT.LEFT): Position the control at the left of the cell SWT.CENTER: Position the control in the horizontal center of the cell SWT.END (or SWT.RIGHT): Position the control at the right of the cell SWT.FILL: Resize the control to fill the cell horizontally

horizontalAlignment

back to summary

public int horizontalAlignment

horizontalAlignment specifies how controls will be positioned horizontally within a cell. The default value is BEGINNING. Possible values are:

SWT.BEGINNING (or SWT.LEFT): Position the control at the left of the cell
SWT.CENTER: Position the control in the horizontal center of the cell
SWT.END (or SWT.RIGHT): Position the control at the right of the cell
SWT.FILL: Resize the control to fill the cell horizontally

horizontalIndent	back to summary
public int horizontalIndent horizontalIndent specifies the number of points of indentation that will be placed along the left side of the cell. The default value is 0.

horizontalSpan	back to summary
public int horizontalSpan horizontalSpan specifies the number of column cells that the control will take up. The default value is 1.

minimumHeight back to summary

minimumHeight	back to summary
public int minimumHeight minimumHeight specifies the minimum height in points. This value applies only if grabExcessVerticalSpace is true. A value of SWT.DEFAULT means that the minimum height will be the result of Control.computeSize(int, int, boolean) where hHint is determined by GridData.heightHint. The default value is 0. Since 3.1 See Also `Control#computeSize(int, int, boolean)`, `GridData#heightHint`

public int minimumHeight

minimumHeight specifies the minimum height in points. This value applies only if grabExcessVerticalSpace is true. A value of SWT.DEFAULT means that the minimum height will be the result of Control.computeSize(int, int, boolean) where hHint is determined by GridData.heightHint. The default value is 0.

Since: 3.1
See Also: Control#computeSize(int, int, boolean), GridData#heightHint

minimumWidth back to summary

minimumWidth	back to summary
public int minimumWidth minimumWidth specifies the minimum width in points. This value applies only if grabExcessHorizontalSpace is true. A value of SWT.DEFAULT means that the minimum width will be the result of Control.computeSize(int, int, boolean) where wHint is determined by GridData.widthHint. The default value is 0. Since 3.1 See Also `Control#computeSize(int, int, boolean)`, `GridData#widthHint`

public int minimumWidth

minimumWidth specifies the minimum width in points. This value applies only if grabExcessHorizontalSpace is true. A value of SWT.DEFAULT means that the minimum width will be the result of Control.computeSize(int, int, boolean) where wHint is determined by GridData.widthHint. The default value is 0.

Since: 3.1
See Also: Control#computeSize(int, int, boolean), GridData#widthHint

VERTICAL_ALIGN_BEGINNING	back to summary
public static final int VERTICAL_ALIGN_BEGINNING Style bit for `new GridData(int)`. Position the control at the top of the cell. Not recommended. Use `new GridData(int, SWT.BEGINNING, boolean, boolean)` instead.

VERTICAL_ALIGN_CENTER	back to summary
public static final int VERTICAL_ALIGN_CENTER Style bit for `new GridData(int)` to position the control in the vertical center of the cell. Not recommended. Use `new GridData(int, SWT.CENTER, boolean, boolean)` instead.

VERTICAL_ALIGN_END	back to summary
public static final int VERTICAL_ALIGN_END Style bit for `new GridData(int)` to position the control at the bottom of the cell. Not recommended. Use `new GridData(int, SWT.END, boolean, boolean)` instead.

VERTICAL_ALIGN_FILL	back to summary
public static final int VERTICAL_ALIGN_FILL Style bit for `new GridData(int)` to resize the control to fill the cell vertically. Not recommended. Use `new GridData(int, SWT.FILL, boolean, boolean)` instead

verticalAlignment	back to summary
public int verticalAlignment verticalAlignment specifies how controls will be positioned vertically within a cell. The default value is CENTER. Possible values are: SWT.BEGINNING (or SWT.TOP): Position the control at the top of the cell SWT.CENTER: Position the control in the vertical center of the cell SWT.END (or SWT.BOTTOM): Position the control at the bottom of the cell SWT.FILL: Resize the control to fill the cell vertically

verticalAlignment

back to summary

public int verticalAlignment

verticalAlignment specifies how controls will be positioned vertically within a cell. The default value is CENTER. Possible values are:

SWT.BEGINNING (or SWT.TOP): Position the control at the top of the cell
SWT.CENTER: Position the control in the vertical center of the cell
SWT.END (or SWT.BOTTOM): Position the control at the bottom of the cell
SWT.FILL: Resize the control to fill the cell vertically

verticalIndent	back to summary
public int verticalIndent verticalIndent specifies the number of points of indentation that will be placed along the top side of the cell. The default value is 0. Since 3.1

verticalIndent

back to summary

public int verticalIndent

verticalIndent specifies the number of points of indentation that will be placed along the top side of the cell. The default value is 0.

Since: 3.1

verticalSpan	back to summary
public int verticalSpan verticalSpan specifies the number of row cells that the control will take up. The default value is 1.

widthHint back to summary

widthHint	back to summary
public int widthHint widthHint specifies the preferred width in points. This value is the wHint passed into Control.computeSize(int, int, boolean) to determine the preferred size of the control. The default value is SWT.DEFAULT. See Also `Control#computeSize(int, int, boolean)`

public int widthHint

widthHint specifies the preferred width in points. This value is the wHint passed into Control.computeSize(int, int, boolean) to determine the preferred size of the control. The default value is SWT.DEFAULT.

See Also: Control#computeSize(int, int, boolean)

Constructor Detail

GridData	back to summary
public GridData() Constructs a new instance of GridData using default values.

GridData	back to summary
public GridData(int style) Constructs a new instance based on the GridData style. This constructor is not recommended. Parameters style:int the GridData style

GridData

back to summary

public GridData(int style)

Constructs a new instance based on the GridData style. This constructor is not recommended.

Parameters

style:int: the GridData style

GridData	back to summary
public GridData(int horizontalAlignment, int verticalAlignment, boolean grabExcessHorizontalSpace, boolean grabExcessVerticalSpace) Constructs a new instance of GridData according to the parameters. Parameters horizontalAlignment:int how control will be positioned horizontally within a cell, one of: SWT.BEGINNING (or SWT.LEFT), SWT.CENTER, SWT.END (or SWT.RIGHT), or SWT.FILL verticalAlignment:int how control will be positioned vertically within a cell, one of: SWT.BEGINNING (or SWT.TOP), SWT.CENTER, SWT.END (or SWT.BOTTOM), or SWT.FILL grabExcessHorizontalSpace:boolean whether cell will be made wide enough to fit the remaining horizontal space grabExcessVerticalSpace:boolean whether cell will be made high enough to fit the remaining vertical space Since 3.0

GridData

back to summary

public GridData(int horizontalAlignment, int verticalAlignment, boolean grabExcessHorizontalSpace, boolean grabExcessVerticalSpace)

Constructs a new instance of GridData according to the parameters.

Parameters

horizontalAlignment:int: how control will be positioned horizontally within a cell, one of: SWT.BEGINNING (or SWT.LEFT), SWT.CENTER, SWT.END (or SWT.RIGHT), or SWT.FILL
verticalAlignment:int: how control will be positioned vertically within a cell, one of: SWT.BEGINNING (or SWT.TOP), SWT.CENTER, SWT.END (or SWT.BOTTOM), or SWT.FILL
grabExcessHorizontalSpace:boolean: whether cell will be made wide enough to fit the remaining horizontal space
grabExcessVerticalSpace:boolean: whether cell will be made high enough to fit the remaining vertical space

Since

3.0

GridData	back to summary
public GridData(int horizontalAlignment, int verticalAlignment, boolean grabExcessHorizontalSpace, boolean grabExcessVerticalSpace, int horizontalSpan, int verticalSpan) Constructs a new instance of GridData according to the parameters. Parameters horizontalAlignment:int how control will be positioned horizontally within a cell, one of: SWT.BEGINNING (or SWT.LEFT), SWT.CENTER, SWT.END (or SWT.RIGHT), or SWT.FILL verticalAlignment:int how control will be positioned vertically within a cell, one of: SWT.BEGINNING (or SWT.TOP), SWT.CENTER, SWT.END (or SWT.BOTTOM), or SWT.FILL grabExcessHorizontalSpace:boolean whether cell will be made wide enough to fit the remaining horizontal space grabExcessVerticalSpace:boolean whether cell will be made high enough to fit the remaining vertical space horizontalSpan:int the number of column cells that the control will take up verticalSpan:int the number of row cells that the control will take up Since 3.0

GridData

back to summary

public GridData(int horizontalAlignment, int verticalAlignment, boolean grabExcessHorizontalSpace, boolean grabExcessVerticalSpace, int horizontalSpan, int verticalSpan)

Constructs a new instance of GridData according to the parameters.

Parameters

horizontalAlignment:int: how control will be positioned horizontally within a cell, one of: SWT.BEGINNING (or SWT.LEFT), SWT.CENTER, SWT.END (or SWT.RIGHT), or SWT.FILL
verticalAlignment:int: how control will be positioned vertically within a cell, one of: SWT.BEGINNING (or SWT.TOP), SWT.CENTER, SWT.END (or SWT.BOTTOM), or SWT.FILL
grabExcessHorizontalSpace:boolean: whether cell will be made wide enough to fit the remaining horizontal space
grabExcessVerticalSpace:boolean: whether cell will be made high enough to fit the remaining vertical space
horizontalSpan:int: the number of column cells that the control will take up
verticalSpan:int: the number of row cells that the control will take up

Since

3.0

GridData	back to summary
public GridData(int width, int height) Constructs a new instance of GridData according to the parameters. A value of SWT.DEFAULT indicates that no minimum width or no minimum height is specified. Parameters width:int a minimum width for the column height:int a minimum height for the row Since 3.0

GridData

back to summary

public GridData(int width, int height)

Constructs a new instance of GridData according to the parameters. A value of SWT.DEFAULT indicates that no minimum width or no minimum height is specified.

Parameters

width:int: a minimum width for the column
height:int: a minimum height for the row

Since

3.0

Method Detail

computeSize	back to summary
pack-priv void computeSize(Control control, int wHint, int hHint, boolean flushCache)

flushCache	back to summary
pack-priv void flushCache()

getName	back to summary
pack-priv String getName()

toString

back to summary

public String toString()

Overrides java.lang.Object.toString.

Returns a string containing a concise, human-readable description of the receiver.

Returns:String

a string representation of the GridData object

Annotations

@Override

public final Class GridData

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail