XNIO API 3.8.13.Final · org.xnio.ssl.JsseSslStreamSourceConduit

Modifier and Type	Field and Description
private final JsseSslConduitEngine	sslEngine
private volatile boolean	tls

Access	Constructor and Description
protected	JsseSslStreamSourceConduit(StreamSourceConduit next, JsseSslConduitEngine sslEngine, boolean tls)

Method Summary

Modifier and Type	Method and Description
public void	awaitReadable() Overrides org.xnio.conduits.AbstractSourceConduit.awaitReadable. Implements org.xnio.conduits.SourceConduit.awaitReadable. Block until this channel becomes readable again.
public void	awaitReadable(long the time to wait time, TimeUnit the time unit timeUnit) Overrides org.xnio.conduits.AbstractSourceConduit.awaitReadable. Implements org.xnio.conduits.SourceConduit.awaitReadable. Block until this conduit becomes readable again, or until the timeout expires.
pack-priv void	enableTls()
public int	read(ByteBuffer the buffer to fill with data from the conduit dst) Overrides org.xnio.conduits.AbstractStreamSourceConduit.read. Implements org.xnio.conduits.StreamSourceConduit.read. Read a sequence of bytes from this conduit to the given buffer.
public long	read(ByteBuffer[] the buffers to fill with data from the conduit dsts, int the offset into the buffer array offs, int the number of buffers to fill len) Overrides org.xnio.conduits.AbstractStreamSourceConduit.read. Implements org.xnio.conduits.StreamSourceConduit.read. Read a sequence of bytes from this conduit to the given buffers.
public void	resumeReads() Overrides org.xnio.conduits.AbstractSourceConduit.resumeReads. Implements org.xnio.conduits.SourceConduit.resumeReads. Indicate that the conduit's `ReadReadyHandler` should be invoked as soon as data can be read without blocking.
public void	terminateReads() Overrides org.xnio.conduits.AbstractSourceConduit.terminateReads. Implements org.xnio.conduits.SourceConduit.terminateReads. Indicate that no more data will be read from this conduit.
public long	transferTo(final long the position within the file from which the transfer is to begin position, final long the number of bytes to be transferred count, final FileChannel the file to write to target) Overrides org.xnio.conduits.AbstractStreamSourceConduit.transferTo. Implements org.xnio.conduits.StreamSourceConduit.transferTo. Transfers bytes into the given file from this channel.
public long	transferTo(final long the number of bytes to be transferred count, final ByteBuffer the buffer to copy through. throughBuffer, final StreamSinkChannel the destination to write to target) Overrides org.xnio.conduits.AbstractStreamSourceConduit.transferTo. Implements org.xnio.conduits.StreamSourceConduit.transferTo. Transfers bytes into the given channel target.

sslEngine	back to summary
private final JsseSslConduitEngine sslEngine

tls	back to summary
private volatile boolean tls

JsseSslStreamSourceConduit	back to summary
protected JsseSslStreamSourceConduit(StreamSourceConduit next, JsseSslConduitEngine sslEngine, boolean tls)

Method Detail

awaitReadable	back to summary
public void awaitReadable() throws IOException Overrides org.xnio.conduits.AbstractSourceConduit.awaitReadable. Implements org.xnio.conduits.SourceConduit.awaitReadable. Doc from org.xnio.conduits.SourceConduit.awaitReadable. Block until this channel becomes readable again. This method may return spuriously before the channel becomes readable. Annotations @Override Exceptions IOException: if an I/O error occurs

awaitReadable

back to summary

public void awaitReadable() throws IOException

Overrides org.xnio.conduits.AbstractSourceConduit.awaitReadable.

Implements org.xnio.conduits.SourceConduit.awaitReadable.

Doc from org.xnio.conduits.SourceConduit.awaitReadable.

Block until this channel becomes readable again. This method may return spuriously before the channel becomes readable.

Annotations

@Override

Exceptions

IOException:: if an I/O error occurs

awaitReadable	back to summary
public void awaitReadable(long time, TimeUnit timeUnit) throws IOException Overrides org.xnio.conduits.AbstractSourceConduit.awaitReadable. Implements org.xnio.conduits.SourceConduit.awaitReadable. Doc from org.xnio.conduits.SourceConduit.awaitReadable. Block until this conduit becomes readable again, or until the timeout expires. This method may return spuriously before the conduit becomes readable or the timeout expires. Parameters time:long the time to wait timeUnit:TimeUnit the time unit Annotations @Override Exceptions IOException: if an I/O error occurs

awaitReadable

back to summary

public void awaitReadable(long time, TimeUnit timeUnit) throws IOException

Overrides org.xnio.conduits.AbstractSourceConduit.awaitReadable.

Implements org.xnio.conduits.SourceConduit.awaitReadable.

Doc from org.xnio.conduits.SourceConduit.awaitReadable.

Block until this conduit becomes readable again, or until the timeout expires. This method may return spuriously before the conduit becomes readable or the timeout expires.

Parameters

time:long: the time to wait
timeUnit:TimeUnit: the time unit

Annotations

@Override

Exceptions

IOException:: if an I/O error occurs

enableTls	back to summary
pack-priv void enableTls()

read back to summary

read	back to summary
public int read(ByteBuffer dst) throws IOException Overrides org.xnio.conduits.AbstractStreamSourceConduit.read. Implements org.xnio.conduits.StreamSourceConduit.read. Doc from org.xnio.conduits.StreamSourceConduit.read. Read a sequence of bytes from this conduit to the given buffer. Parameters dst:ByteBuffer the buffer to fill with data from the conduit Returns:int the number of bytes (possibly 0) that were actually transferred, or -1 if the end of input was reached or this conduit's `terminateReads()` method was previously called Annotations @Override Exceptions IOException: if an error occurs

public int read(ByteBuffer dst) throws IOException

Overrides org.xnio.conduits.AbstractStreamSourceConduit.read.

Implements org.xnio.conduits.StreamSourceConduit.read.

Doc from org.xnio.conduits.StreamSourceConduit.read.

Read a sequence of bytes from this conduit to the given buffer.

Parameters

dst:ByteBuffer: the buffer to fill with data from the conduit

Returns:int

the number of bytes (possibly 0) that were actually transferred, or -1 if the end of input was reached or this conduit's terminateReads() method was previously called

Annotations

@Override

Exceptions

IOException:: if an error occurs

read back to summary

read	back to summary
public long read(ByteBuffer[] dsts, int offs, int len) throws IOException Overrides org.xnio.conduits.AbstractStreamSourceConduit.read. Implements org.xnio.conduits.StreamSourceConduit.read. Doc from org.xnio.conduits.StreamSourceConduit.read. Read a sequence of bytes from this conduit to the given buffers. Parameters dsts:ByteBuffer[] the buffers to fill with data from the conduit offs:int the offset into the buffer array len:int the number of buffers to fill Returns:long the number of bytes (possibly 0) that were actually transferred, or -1 if the end of input was reached or this conduit's `terminateReads()` method was previously called Annotations @Override Exceptions IOException: if an error occurs

public long read(ByteBuffer[] dsts, int offs, int len) throws IOException

Overrides org.xnio.conduits.AbstractStreamSourceConduit.read.

Implements org.xnio.conduits.StreamSourceConduit.read.

Doc from org.xnio.conduits.StreamSourceConduit.read.

Read a sequence of bytes from this conduit to the given buffers.

Parameters

dsts:ByteBuffer[]: the buffers to fill with data from the conduit
offs:int: the offset into the buffer array
len:int: the number of buffers to fill

Returns:long

the number of bytes (possibly 0) that were actually transferred, or -1 if the end of input was reached or this conduit's terminateReads() method was previously called

Annotations

@Override

Exceptions

IOException:: if an error occurs

resumeReads back to summary

resumeReads	back to summary
public void resumeReads() Overrides org.xnio.conduits.AbstractSourceConduit.resumeReads. Implements org.xnio.conduits.SourceConduit.resumeReads. Doc from org.xnio.conduits.SourceConduit.resumeReads. Indicate that the conduit's `ReadReadyHandler` should be invoked as soon as data can be read without blocking. Annotations @Override

public void resumeReads()

Overrides org.xnio.conduits.AbstractSourceConduit.resumeReads.

Implements org.xnio.conduits.SourceConduit.resumeReads.

Doc from org.xnio.conduits.SourceConduit.resumeReads.

Indicate that the conduit's ReadReadyHandler should be invoked as soon as data can be read without blocking.

Annotations

@Override

terminateReads	back to summary
public void terminateReads() throws IOException Overrides org.xnio.conduits.AbstractSourceConduit.terminateReads. Implements org.xnio.conduits.SourceConduit.terminateReads. Doc from org.xnio.conduits.SourceConduit.terminateReads. Indicate that no more data will be read from this conduit. If unread data exists, an exception may be thrown. Annotations @Override Exceptions IOException: if there was a problem

terminateReads

back to summary

public void terminateReads() throws IOException

Overrides org.xnio.conduits.AbstractSourceConduit.terminateReads.

Implements org.xnio.conduits.SourceConduit.terminateReads.

Doc from org.xnio.conduits.SourceConduit.terminateReads.

Indicate that no more data will be read from this conduit. If unread data exists, an exception may be thrown.

Annotations

@Override

Exceptions

IOException:: if there was a problem

transferTo	back to summary
public long transferTo(final long position, final long count, final FileChannel target) throws IOException Overrides org.xnio.conduits.AbstractStreamSourceConduit.transferTo. Implements org.xnio.conduits.StreamSourceConduit.transferTo. Doc from org.xnio.conduits.StreamSourceConduit.transferTo. Transfers bytes into the given file from this channel. Parameters position:long the position within the file from which the transfer is to begin count:long the number of bytes to be transferred target:FileChannel the file to write to Returns:long the number of bytes (possibly 0) that were actually transferred Annotations @Override Exceptions IOException: if an I/O error occurs

transferTo

back to summary

public long transferTo(final long position, final long count, final FileChannel target) throws IOException

Overrides org.xnio.conduits.AbstractStreamSourceConduit.transferTo.

Implements org.xnio.conduits.StreamSourceConduit.transferTo.

Doc from org.xnio.conduits.StreamSourceConduit.transferTo.

Transfers bytes into the given file from this channel.

Parameters

position:long: the position within the file from which the transfer is to begin
count:long: the number of bytes to be transferred
target:FileChannel: the file to write to

Returns:long

the number of bytes (possibly 0) that were actually transferred

Annotations

@Override

Exceptions

IOException:: if an I/O error occurs

transferTo back to summary

transferTo	back to summary
public long transferTo(final long count, final ByteBuffer throughBuffer, final StreamSinkChannel target) throws IOException Overrides org.xnio.conduits.AbstractStreamSourceConduit.transferTo. Implements org.xnio.conduits.StreamSourceConduit.transferTo. Doc from org.xnio.conduits.StreamSourceConduit.transferTo. Transfers bytes into the given channel target. On entry, `throughBuffer` will be cleared. On exit, the buffer will be flipped for emptying, and may possibly be empty or may contain data. If this method returns a value less than `count`, then the remaining data in `throughBuffer` may contain data read from this channel which must be written to `target` to complete the operation. Parameters count:long the number of bytes to be transferred throughBuffer:ByteBuffer the buffer to copy through. target:StreamSinkChannel the destination to write to Returns:long the number of bytes (possibly 0) that were actually transferred, or -1 if the end of input was reached Annotations @Override Exceptions IOException: if an I/O error occurs

public long transferTo(final long count, final ByteBuffer throughBuffer, final StreamSinkChannel target) throws IOException

Overrides org.xnio.conduits.AbstractStreamSourceConduit.transferTo.

Implements org.xnio.conduits.StreamSourceConduit.transferTo.

Doc from org.xnio.conduits.StreamSourceConduit.transferTo.

Transfers bytes into the given channel target. On entry, throughBuffer will be cleared. On exit, the buffer will be flipped for emptying, and may possibly be empty or may contain data. If this method returns a value less than count, then the remaining data in throughBuffer may contain data read from this channel which must be written to target to complete the operation.

Parameters

count:long: the number of bytes to be transferred
throughBuffer:ByteBuffer: the buffer to copy through.
target:StreamSinkChannel: the destination to write to

Returns:long

the number of bytes (possibly 0) that were actually transferred, or -1 if the end of input was reached

Annotations

@Override

Exceptions

IOException:: if an I/O error occurs

pack-priv final Class JsseSslStreamSourceConduit

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail