Structure specifying the parameters of a newly created indirect commands layout object.

Description

The following code illustrates some of the flags:


void cmdProcessAllSequences(cmd, pipeline, indirectCommandsLayout, pIndirectCommandsTokens, sequencesCount, indexbuffer, indexbufferOffset)
{
  for (s = 0; s < sequencesCount; s++)
  {
    sUsed = s;

    if (indirectCommandsLayout.flags & VK_INDIRECT_COMMANDS_LAYOUT_USAGE_INDEXED_SEQUENCES_BIT_NV) {
      sUsed = indexbuffer.load_uint32( sUsed * sizeof(uint32_t) + indexbufferOffset);
    }

    if (indirectCommandsLayout.flags & VK_INDIRECT_COMMANDS_LAYOUT_USAGE_UNORDERED_SEQUENCES_BIT_NV) {
      sUsed = incoherent_implementation_dependent_permutation[ sUsed ];
    }

    cmdProcessSequence( cmd, pipeline, indirectCommandsLayout, pIndirectCommandsTokens, sUsed );
  }
}

When tokens are consumed, an offset is computed based on token offset and stream stride. The resulting offset is required to be aligned. The alignment for a specific token is equal to the scalar alignment of the data type as defined in Alignment Requirements, or VkPhysicalDeviceDeviceGeneratedCommandsPropertiesNV::minIndirectCommandsBufferOffsetAlignment, whichever is lower.

Note

A minIndirectCommandsBufferOffsetAlignment of 4 allows VkDeviceAddress to be packed as uvec2 with scalar layout instead of uint64_t with 8 byte alignment. This enables direct compatibility with D3D12 command signature layouts.

Valid Usage

The pipelineBindPoint must be PIPELINE_BIND_POINT_GRAPHICS or PIPELINE_BIND_POINT_COMPUTE
tokenCount must be greater than 0 and less than or equal to VkPhysicalDeviceDeviceGeneratedCommandsPropertiesNV::maxIndirectCommandsTokenCount
If pTokens contains an entry of INDIRECT_COMMANDS_TOKEN_TYPE_SHADER_GROUP_NV it must be the first element of the array and there must be only a single element of such token type
If pTokens contains an entry of INDIRECT_COMMANDS_TOKEN_TYPE_STATE_FLAGS_NV there must be only a single element of such token type
All state tokens in pTokens must occur before any work provoking tokens (INDIRECT_COMMANDS_TOKEN_TYPE_DRAW_NV, INDIRECT_COMMANDS_TOKEN_TYPE_DRAW_INDEXED_NV, INDIRECT_COMMANDS_TOKEN_TYPE_DRAW_TASKS_NV, INDIRECT_COMMANDS_TOKEN_TYPE_DRAW_MESH_TASKS_NV , INDIRECT_COMMANDS_TOKEN_TYPE_DISPATCH_NV )
The content of pTokens must include one single work provoking token that is compatible with the pipelineBindPoint
streamCount must be greater than 0 and less or equal to VkPhysicalDeviceDeviceGeneratedCommandsPropertiesNV::maxIndirectCommandsStreamCount
each element of pStreamStrides must be greater than 0 and less than or equal to VkPhysicalDeviceDeviceGeneratedCommandsPropertiesNV::maxIndirectCommandsStreamStride. Furthermore the alignment of each token input must be ensured
If pipelineBindPoint is PIPELINE_BIND_POINT_COMPUTE then the VkPhysicalDeviceDeviceGeneratedCommandsComputeFeaturesNV::deviceGeneratedCompute feature must be enabled
If pipelineBindPoint is PIPELINE_BIND_POINT_COMPUTE then the state tokens in pTokens must only include INDIRECT_COMMANDS_TOKEN_TYPE_DISPATCH_NV, INDIRECT_COMMANDS_TOKEN_TYPE_PIPELINE_NV, or INDIRECT_COMMANDS_TOKEN_TYPE_PUSH_CONSTANT_NV
If pipelineBindPoint is PIPELINE_BIND_POINT_COMPUTE and pTokens includes INDIRECT_COMMANDS_TOKEN_TYPE_PIPELINE_NV, then the VkPhysicalDeviceDeviceGeneratedCommandsComputeFeaturesNV::deviceGeneratedComputePipelines feature must be enabled

Valid Usage (Implicit)

sType must be STRUCTURE_TYPE_INDIRECT_COMMANDS_LAYOUT_CREATE_INFO_NV
pNext must be NULL
flags must be a valid combination of VkIndirectCommandsLayoutUsageFlagBitsNV values
pipelineBindPoint must be a valid VkPipelineBindPoint value
pTokens must be a valid pointer to an array of tokenCount valid VkIndirectCommandsLayoutTokenNV structures
pStreamStrides must be a valid pointer to an array of streamCount uint32_t values
tokenCount must be greater than 0
streamCount must be greater than 0

Layout


struct VkIndirectCommandsLayoutCreateInfoNV {
    VkStructureType sType;
    void const * pNext;
    VkIndirectCommandsLayoutUsageFlagsNV flags;
    VkPipelineBindPoint pipelineBindPoint;
    uint32_t tokenCount;
    VkIndirectCommandsLayoutTokenNV const * pTokens;
    uint32_t streamCount;
    uint32_t const * pStreamStrides;
}

Nested and Inner Type Summary

Modifier and Type	Class and Description
public static class	VkIndirectCommandsLayoutCreateInfoNV.Buffer An array of `VkIndirectCommandsLayoutCreateInfoNV` structs.

Field Summary

Modifier and Type	Field and Description
public static final int	ALIGNOF The struct alignment in bytes.
public static final int	FLAGS The struct member offsets.
public static final int	PIPELINEBINDPOINT The struct member offsets.
public static final int	PNEXT The struct member offsets.
public static final int	PSTREAMSTRIDES The struct member offsets.
public static final int	PTOKENS The struct member offsets.
public static final int	SIZEOF The struct size in bytes.
public static final int	STREAMCOUNT The struct member offsets.
public static final int	STYPE The struct member offsets.
public static final int	TOKENCOUNT The struct member offsets.

Inherited from org.lwjgl.system.Struct:: container DEFAULT_ALIGN_AS DEFAULT_PACK_ALIGNMENT

Constructor Summary

Access	Constructor and Description
protected	VkIndirectCommandsLayoutCreateInfoNV(long address, ByteBuffer container)
public	VkIndirectCommandsLayoutCreateInfoNV(ByteBuffer container) Creates a `VkIndirectCommandsLayoutCreateInfoNV` instance at the current position of the specified `ByteBuffer` container.

Method Summary

Modifier and Type	Method and Description
public static VkIndirectCommandsLayoutCreateInfoNV	calloc() Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance allocated with `memCalloc`.
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer	calloc(int the buffer capacity capacity) Returns a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance allocated with `memCalloc`.
public static VkIndirectCommandsLayoutCreateInfoNV	calloc(MemoryStack the stack from which to allocate stack) Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance allocated on the specified `MemoryStack` and initializes all its bits to zero.
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer	calloc(int the buffer capacity capacity, MemoryStack the stack from which to allocate stack) Returns a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance allocated on the specified `MemoryStack` and initializes all its bits to zero.
protected VkIndirectCommandsLayoutCreateInfoNV	create(long the struct memory address address, ByteBuffer an optional container buffer, to be referenced strongly by the struct instance. container) Implements abstract org.lwjgl.system.Struct.create. Similar to `the constructor`, but returns the exact type of the `Struct` subclass.
public static VkIndirectCommandsLayoutCreateInfoNV	create() Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance allocated with `BufferUtils`.
public static VkIndirectCommandsLayoutCreateInfoNV	create(long address) Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance for the specified memory address.
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer	create(int the buffer capacity capacity) Returns a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance allocated with `BufferUtils`.
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer	create(long the memory address address, int the buffer capacity capacity) Create a `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance at the specified memory.
public static VkIndirectCommandsLayoutCreateInfoNV	createSafe(long address) Like `create`, but returns `null` if `address` is `NULL`.
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer	createSafe(long address, int capacity) Like `create`, but returns `null` if `address` is `NULL`.
public int	flags() a bitmask of `VkIndirectCommandsLayoutUsageFlagBitsNV` specifying usage hints of this layout.
public VkIndirectCommandsLayoutCreateInfoNV	flags(int value) Sets the specified value to the `flags` field.
public static VkIndirectCommandsLayoutCreateInfoNV	malloc() Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance allocated with `memAlloc`.
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer	malloc(int the buffer capacity capacity) Returns a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance allocated with `memAlloc`.
public static VkIndirectCommandsLayoutCreateInfoNV	malloc(MemoryStack the stack from which to allocate stack) Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance allocated on the specified `MemoryStack`.
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer	malloc(int the buffer capacity capacity, MemoryStack the stack from which to allocate stack) Returns a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance allocated on the specified `MemoryStack`.
public static int	nflags(long struct) Unsafe version of `flags`.
public static void	nflags(long struct, int value) Unsafe version of `flags`.
public static int	npipelineBindPoint(long struct) Unsafe version of `pipelineBindPoint`.
public static void	npipelineBindPoint(long struct, int value) Unsafe version of `pipelineBindPoint`.
public static long	npNext(long struct) Unsafe version of `pNext`.
public static void	npNext(long struct, long value) Unsafe version of `pNext`.
public static IntBuffer	npStreamStrides(long struct) Unsafe version of `pStreamStrides`.
public static void	npStreamStrides(long struct, IntBuffer value) Unsafe version of `pStreamStrides`.
public static VkIndirectCommandsLayoutTokenNV.Buffer	npTokens(long struct) Unsafe version of `pTokens`.
public static void	npTokens(long struct, VkIndirectCommandsLayoutTokenNV.Buffer value) Unsafe version of `pTokens`.
public static int	nstreamCount(long struct) Unsafe version of `streamCount`.
public static void	nstreamCount(long struct, int value) Sets the specified value to the `streamCount` field of the specified `struct`.
public static int	nsType(long struct) Unsafe version of `sType`.
public static void	nsType(long struct, int value) Unsafe version of `sType`.
public static int	ntokenCount(long struct) Unsafe version of `tokenCount`.
public static void	ntokenCount(long struct, int value) Sets the specified value to the `tokenCount` field of the specified `struct`.
public int	pipelineBindPoint() the `VkPipelineBindPoint` that this layout targets.
public VkIndirectCommandsLayoutCreateInfoNV	pipelineBindPoint(int value) Sets the specified value to the `pipelineBindPoint` field.
public long	pNext() `NULL` or a pointer to a structure extending this structure.
public VkIndirectCommandsLayoutCreateInfoNV	pNext(long value) Sets the specified value to the `pNext` field.
public IntBuffer	pStreamStrides() an array defining the byte stride for each input stream.
public VkIndirectCommandsLayoutCreateInfoNV	pStreamStrides(IntBuffer value) Sets the address of the specified `IntBuffer` to the `pStreamStrides` field.
public VkIndirectCommandsLayoutTokenNV.Buffer	pTokens() an array describing each command token in detail.
public VkIndirectCommandsLayoutCreateInfoNV	pTokens(VkIndirectCommandsLayoutTokenNV.Buffer value) Sets the address of the specified `VkIndirectCommandsLayoutTokenNV.Buffer` to the `pTokens` field.
public VkIndirectCommandsLayoutCreateInfoNV	set(int sType, long pNext, int flags, int pipelineBindPoint, VkIndirectCommandsLayoutTokenNV.Buffer pTokens, IntBuffer pStreamStrides) Initializes this struct with the specified values.
public VkIndirectCommandsLayoutCreateInfoNV	Returns: this struct set(VkIndirectCommandsLayoutCreateInfoNV the source struct src) Copies the specified struct data to this struct.
public int	sizeof() Implements abstract org.lwjgl.system.Struct.sizeof. Returns `sizeof(struct)`.
public int	streamCount() the number of streams used to provide the token inputs.
public int	sType() a `VkStructureType` value identifying this structure.
public VkIndirectCommandsLayoutCreateInfoNV	sType(int value) Sets the specified value to the `sType` field.
public VkIndirectCommandsLayoutCreateInfoNV	sType$Default() Sets the `STRUCTURE_TYPE_INDIRECT_COMMANDS_LAYOUT_CREATE_INFO_NV` value to the `sType` field.
public int	tokenCount() the length of the individual command sequence.
public static void	validate(long the struct to validate struct) Validates pointer members that should not be `NULL`.

Field Detail

ALIGNOF	back to summary
public static final int ALIGNOF The struct alignment in bytes.

FLAGS	back to summary
public static final int FLAGS The struct member offsets.

PIPELINEBINDPOINT	back to summary
public static final int PIPELINEBINDPOINT The struct member offsets.

PNEXT	back to summary
public static final int PNEXT The struct member offsets.

PSTREAMSTRIDES	back to summary
public static final int PSTREAMSTRIDES The struct member offsets.

PTOKENS	back to summary
public static final int PTOKENS The struct member offsets.

SIZEOF	back to summary
public static final int SIZEOF The struct size in bytes.

STREAMCOUNT	back to summary
public static final int STREAMCOUNT The struct member offsets.

STYPE	back to summary
public static final int STYPE The struct member offsets.

TOKENCOUNT	back to summary
public static final int TOKENCOUNT The struct member offsets.

Constructor Detail

VkIndirectCommandsLayoutCreateInfoNV	back to summary
protected VkIndirectCommandsLayoutCreateInfoNV(long address, ByteBuffer container)

VkIndirectCommandsLayoutCreateInfoNV back to summary

VkIndirectCommandsLayoutCreateInfoNV	back to summary
public VkIndirectCommandsLayoutCreateInfoNV(ByteBuffer container) Creates a `VkIndirectCommandsLayoutCreateInfoNV` instance at the current position of the specified `ByteBuffer` container. Changes to the buffer's content will be visible to the struct instance and vice versa. The created instance holds a strong reference to the container object.

public VkIndirectCommandsLayoutCreateInfoNV(ByteBuffer container)

Creates a VkIndirectCommandsLayoutCreateInfoNV instance at the current position of the specified ByteBuffer container. Changes to the buffer's content will be visible to the struct instance and vice versa.

The created instance holds a strong reference to the container object.

Method Detail

calloc	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV calloc() Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance allocated with `memCalloc`. The instance must be explicitly freed.

calloc back to summary

calloc	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer calloc(int capacity) Returns a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance allocated with `memCalloc`. The instance must be explicitly freed. Parameters capacity:int the buffer capacity

public static VkIndirectCommandsLayoutCreateInfoNV.Buffer calloc(int capacity)

Returns a new VkIndirectCommandsLayoutCreateInfoNV.Buffer instance allocated with memCalloc. The instance must be explicitly freed.

Parameters

capacity:int: the buffer capacity

calloc back to summary

calloc	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV calloc(MemoryStack stack) Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance allocated on the specified `MemoryStack` and initializes all its bits to zero. Parameters stack:MemoryStack the stack from which to allocate

public static VkIndirectCommandsLayoutCreateInfoNV calloc(MemoryStack stack)

Returns a new VkIndirectCommandsLayoutCreateInfoNV instance allocated on the specified MemoryStack and initializes all its bits to zero.

Parameters

stack:MemoryStack: the stack from which to allocate

calloc back to summary

calloc	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer calloc(int capacity, MemoryStack stack) Returns a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance allocated on the specified `MemoryStack` and initializes all its bits to zero. Parameters capacity:int the buffer capacity stack:MemoryStack the stack from which to allocate

public static VkIndirectCommandsLayoutCreateInfoNV.Buffer calloc(int capacity, MemoryStack stack)

Returns a new VkIndirectCommandsLayoutCreateInfoNV.Buffer instance allocated on the specified MemoryStack and initializes all its bits to zero.

Parameters

capacity:int: the buffer capacity
stack:MemoryStack: the stack from which to allocate

create back to summary

create	back to summary
protected VkIndirectCommandsLayoutCreateInfoNV create(long address, ByteBuffer container) Implements abstract org.lwjgl.system.Struct.create. Doc from org.lwjgl.system.Struct.create. Similar to `the constructor`, but returns the exact type of the `Struct` subclass. Effectively, every `Struct` instance is a factory for more instances of the same type. This is used by `StructBuffer`. Parameters address:long the struct memory address container:ByteBuffer an optional container buffer, to be referenced strongly by the struct instance. Annotations @Override

protected VkIndirectCommandsLayoutCreateInfoNV create(long address, ByteBuffer container)

Implements abstract org.lwjgl.system.Struct.create.

Doc from org.lwjgl.system.Struct.create.

Similar to the constructor, but returns the exact type of the Struct subclass.

Effectively, every Struct instance is a factory for more instances of the same type. This is used by StructBuffer.

Parameters

address:long: the struct memory address
container:ByteBuffer: an optional container buffer, to be referenced strongly by the struct instance.

Annotations

@Override

create	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV create() Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance allocated with `BufferUtils`.

create	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV create(long address) Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance for the specified memory address.

create back to summary

create	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer create(int capacity) Returns a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance allocated with `BufferUtils`. Parameters capacity:int the buffer capacity

public static VkIndirectCommandsLayoutCreateInfoNV.Buffer create(int capacity)

Returns a new VkIndirectCommandsLayoutCreateInfoNV.Buffer instance allocated with BufferUtils.

Parameters

capacity:int: the buffer capacity

create back to summary

create	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer create(long address, int capacity) Create a `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance at the specified memory. Parameters address:long the memory address capacity:int the buffer capacity

public static VkIndirectCommandsLayoutCreateInfoNV.Buffer create(long address, int capacity)

Create a VkIndirectCommandsLayoutCreateInfoNV.Buffer instance at the specified memory.

Parameters

address:long: the memory address
capacity:int: the buffer capacity

createSafe back to summary

createSafe	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV createSafe(long address) Like `create`, but returns `null` if `address` is `NULL`. Annotations @Nullable

public static VkIndirectCommandsLayoutCreateInfoNV createSafe(long address)

Like create, but returns null if address is NULL.

Annotations

@Nullable

createSafe back to summary

createSafe	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer createSafe(long address, int capacity) Like `create`, but returns `null` if `address` is `NULL`. Annotations @Nullable

public static VkIndirectCommandsLayoutCreateInfoNV.Buffer createSafe(long address, int capacity)

Like create, but returns null if address is NULL.

Annotations

@Nullable

flags back to summary

flags	back to summary
public int flags() a bitmask of `VkIndirectCommandsLayoutUsageFlagBitsNV` specifying usage hints of this layout. Annotations @NativeType:VkIndirectCommandsLayoutUsageFlagsNV

public int flags()

a bitmask of VkIndirectCommandsLayoutUsageFlagBitsNV specifying usage hints of this layout.

Annotations

@NativeType:VkIndirectCommandsLayoutUsageFlagsNV

flags	back to summary
public VkIndirectCommandsLayoutCreateInfoNV flags(int value) Sets the specified value to the `flags` field.

malloc	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV malloc() Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance allocated with `memAlloc`. The instance must be explicitly freed.

malloc back to summary

malloc	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer malloc(int capacity) Returns a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance allocated with `memAlloc`. The instance must be explicitly freed. Parameters capacity:int the buffer capacity

public static VkIndirectCommandsLayoutCreateInfoNV.Buffer malloc(int capacity)

Returns a new VkIndirectCommandsLayoutCreateInfoNV.Buffer instance allocated with memAlloc. The instance must be explicitly freed.

Parameters

capacity:int: the buffer capacity

malloc back to summary

malloc	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV malloc(MemoryStack stack) Returns a new `VkIndirectCommandsLayoutCreateInfoNV` instance allocated on the specified `MemoryStack`. Parameters stack:MemoryStack the stack from which to allocate

public static VkIndirectCommandsLayoutCreateInfoNV malloc(MemoryStack stack)

Returns a new VkIndirectCommandsLayoutCreateInfoNV instance allocated on the specified MemoryStack.

Parameters

stack:MemoryStack: the stack from which to allocate

malloc back to summary

malloc	back to summary
public static VkIndirectCommandsLayoutCreateInfoNV.Buffer malloc(int capacity, MemoryStack stack) Returns a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance allocated on the specified `MemoryStack`. Parameters capacity:int the buffer capacity stack:MemoryStack the stack from which to allocate

public static VkIndirectCommandsLayoutCreateInfoNV.Buffer malloc(int capacity, MemoryStack stack)

Returns a new VkIndirectCommandsLayoutCreateInfoNV.Buffer instance allocated on the specified MemoryStack.

Parameters

capacity:int: the buffer capacity
stack:MemoryStack: the stack from which to allocate

nflags	back to summary
public static int nflags(long struct) Unsafe version of `flags`.

nflags	back to summary
public static void nflags(long struct, int value) Unsafe version of `flags`.

npipelineBindPoint	back to summary
public static int npipelineBindPoint(long struct) Unsafe version of `pipelineBindPoint`.

npipelineBindPoint	back to summary
public static void npipelineBindPoint(long struct, int value) Unsafe version of `pipelineBindPoint`.

npNext	back to summary
public static long npNext(long struct) Unsafe version of `pNext`.

npNext	back to summary
public static void npNext(long struct, long value) Unsafe version of `pNext`.

npStreamStrides	back to summary
public static IntBuffer npStreamStrides(long struct) Unsafe version of `pStreamStrides`.

npStreamStrides	back to summary
public static void npStreamStrides(long struct, IntBuffer value) Unsafe version of `pStreamStrides`.

npTokens	back to summary
public static VkIndirectCommandsLayoutTokenNV.Buffer npTokens(long struct) Unsafe version of `pTokens`.

npTokens	back to summary
public static void npTokens(long struct, VkIndirectCommandsLayoutTokenNV.Buffer value) Unsafe version of `pTokens`.

nstreamCount	back to summary
public static int nstreamCount(long struct) Unsafe version of `streamCount`.

nstreamCount	back to summary
public static void nstreamCount(long struct, int value) Sets the specified value to the `streamCount` field of the specified `struct`.

nsType	back to summary
public static int nsType(long struct) Unsafe version of `sType`.

nsType	back to summary
public static void nsType(long struct, int value) Unsafe version of `sType`.

ntokenCount	back to summary
public static int ntokenCount(long struct) Unsafe version of `tokenCount`.

ntokenCount	back to summary
public static void ntokenCount(long struct, int value) Sets the specified value to the `tokenCount` field of the specified `struct`.

pipelineBindPoint back to summary

pipelineBindPoint	back to summary
public int pipelineBindPoint() the `VkPipelineBindPoint` that this layout targets. Annotations @NativeType:VkPipelineBindPoint

public int pipelineBindPoint()

the VkPipelineBindPoint that this layout targets.

Annotations

@NativeType:VkPipelineBindPoint

pipelineBindPoint	back to summary
public VkIndirectCommandsLayoutCreateInfoNV pipelineBindPoint(int value) Sets the specified value to the `pipelineBindPoint` field.

pNext back to summary

public long pNext()

NULL or a pointer to a structure extending this structure.

Annotations

@NativeType:void const *

pNext	back to summary
public VkIndirectCommandsLayoutCreateInfoNV pNext(long value) Sets the specified value to the `pNext` field.

pStreamStrides

back to summary

public IntBuffer pStreamStrides()

an array defining the byte stride for each input stream.

Annotations

@NativeType:uint32_t const *

pStreamStrides	back to summary
public VkIndirectCommandsLayoutCreateInfoNV pStreamStrides(IntBuffer value) Sets the address of the specified `IntBuffer` to the `pStreamStrides` field.

pTokens back to summary

public VkIndirectCommandsLayoutTokenNV.Buffer pTokens()

an array describing each command token in detail. See VkIndirectCommandsTokenTypeNV and VkIndirectCommandsLayoutTokenNV below for details.

Annotations

@NativeType:VkIndirectCommandsLayoutTokenNV const *

pTokens	back to summary
public VkIndirectCommandsLayoutCreateInfoNV pTokens(VkIndirectCommandsLayoutTokenNV.Buffer value) Sets the address of the specified `VkIndirectCommandsLayoutTokenNV.Buffer` to the `pTokens` field.

set	back to summary
public VkIndirectCommandsLayoutCreateInfoNV set(int sType, long pNext, int flags, int pipelineBindPoint, VkIndirectCommandsLayoutTokenNV.Buffer pTokens, IntBuffer pStreamStrides) Initializes this struct with the specified values.

set

back to summary

public VkIndirectCommandsLayoutCreateInfoNV set(VkIndirectCommandsLayoutCreateInfoNV src)

Copies the specified struct data to this struct.

Parameters

src:VkIndirectCommandsLayoutCreateInfoNV: the source struct

Returns:VkIndirectCommandsLayoutCreateInfoNV

this struct

sizeof back to summary

public int sizeof()

Implements abstract org.lwjgl.system.Struct.sizeof.

Doc from org.lwjgl.system.Struct.sizeof.

Returns sizeof(struct).

Annotations

@Override

streamCount

back to summary

public int streamCount()

the number of streams used to provide the token inputs.

Annotations

@NativeType:uint32_t

sType back to summary

public int sType()

a VkStructureType value identifying this structure.

Annotations

@NativeType:VkStructureType

sType	back to summary
public VkIndirectCommandsLayoutCreateInfoNV sType(int value) Sets the specified value to the `sType` field.

sType$Default	back to summary
public VkIndirectCommandsLayoutCreateInfoNV sType$Default() Sets the `STRUCTURE_TYPE_INDIRECT_COMMANDS_LAYOUT_CREATE_INFO_NV` value to the `sType` field.

tokenCount

back to summary

public int tokenCount()

the length of the individual command sequence.

Annotations

@NativeType:uint32_t

validate back to summary

public static void validate(long struct)

Validates pointer members that should not be NULL.

Parameters

struct:long: the struct to validate

org.lwjgl.vulkan back to summary

public Class VkIndirectCommandsLayoutCreateInfoNV.Buffer

Class Inheritance

extends StructBuffer<VkIndirectCommandsLayoutCreateInfoNV, VkIndirectCommandsLayoutCreateInfoNV.Buffer>
implements NativeResource

java.lang.Object
org.lwjgl.system.Pointer.Default
org.lwjgl.system.CustomBuffer
org.lwjgl.system.StructBuffer
org.lwjgl.vulkan.VkIndirectCommandsLayoutCreateInfoNV.Buffer

All Implemented Interfaces

org.lwjgl.system.NativeResource, java.lang.AutoCloseable

An array of VkIndirectCommandsLayoutCreateInfoNV structs.

Field Summary

Modifier and Type	Field and Description
private static final VkIndirectCommandsLayoutCreateInfoNV	ELEMENT_FACTORY

Constructor Summary

Access	Constructor and Description
public	Buffer(ByteBuffer container) Creates a new `VkIndirectCommandsLayoutCreateInfoNV.Buffer` instance backed by the specified container.
public	Buffer(long address, int cap)
pack-priv	Buffer(long address, ByteBuffer container, int mark, int pos, int lim, int cap)

Method Summary

Modifier and Type	Method and Description
public int	Returns: the value of the `VkIndirectCommandsLayoutCreateInfoNV#flags` field. flags()
public VkIndirectCommandsLayoutCreateInfoNV.Buffer	flags(int value) Sets the specified value to the `VkIndirectCommandsLayoutCreateInfoNV#flags` field.
protected VkIndirectCommandsLayoutCreateInfoNV	getElementFactory() Implements abstract org.lwjgl.system.StructBuffer.getElementFactory.
public int	Returns: the value of the `VkIndirectCommandsLayoutCreateInfoNV#pipelineBindPoint` field. pipelineBindPoint()
public VkIndirectCommandsLayoutCreateInfoNV.Buffer	pipelineBindPoint(int value) Sets the specified value to the `VkIndirectCommandsLayoutCreateInfoNV#pipelineBindPoint` field.
public long	Returns: the value of the `VkIndirectCommandsLayoutCreateInfoNV#pNext` field. pNext()
public VkIndirectCommandsLayoutCreateInfoNV.Buffer	pNext(long value) Sets the specified value to the `VkIndirectCommandsLayoutCreateInfoNV#pNext` field.
public IntBuffer	Returns: a `IntBuffer` view of the data pointed to by the `VkIndirectCommandsLayoutCreateInfoNV#pStreamStrides` field. pStreamStrides()
public VkIndirectCommandsLayoutCreateInfoNV.Buffer	pStreamStrides(IntBuffer value) Sets the address of the specified `IntBuffer` to the `VkIndirectCommandsLayoutCreateInfoNV#pStreamStrides` field.
public VkIndirectCommandsLayoutTokenNV.Buffer	Returns: a `VkIndirectCommandsLayoutTokenNV.Buffer` view of the struct array pointed to by the `VkIndirectCommandsLayoutCreateInfoNV#pTokens` field. pTokens()
public VkIndirectCommandsLayoutCreateInfoNV.Buffer	pTokens(VkIndirectCommandsLayoutTokenNV.Buffer value) Sets the address of the specified `VkIndirectCommandsLayoutTokenNV.Buffer` to the `VkIndirectCommandsLayoutCreateInfoNV#pTokens` field.
protected VkIndirectCommandsLayoutCreateInfoNV.Buffer	self() Implements abstract org.lwjgl.system.CustomBuffer.self.
public int	Returns: the value of the `VkIndirectCommandsLayoutCreateInfoNV#streamCount` field. streamCount()
public int	Returns: the value of the `VkIndirectCommandsLayoutCreateInfoNV#sType` field. sType()
public VkIndirectCommandsLayoutCreateInfoNV.Buffer	sType(int value) Sets the specified value to the `VkIndirectCommandsLayoutCreateInfoNV#sType` field.
public VkIndirectCommandsLayoutCreateInfoNV.Buffer	sType$Default() Sets the `STRUCTURE_TYPE_INDIRECT_COMMANDS_LAYOUT_CREATE_INFO_NV` value to the `VkIndirectCommandsLayoutCreateInfoNV#sType` field.
public int	Returns: the value of the `VkIndirectCommandsLayoutCreateInfoNV#tokenCount` field. tokenCount()

Inherited from org.lwjgl.system.StructBuffer:: apply apply forEach get get get get iterator parallelStream put put sizeof spliterator stream

Field Detail

ELEMENT_FACTORY	back to summary
private static final VkIndirectCommandsLayoutCreateInfoNV ELEMENT_FACTORY

Constructor Detail

Buffer back to summary

public Buffer(ByteBuffer container)

Creates a new VkIndirectCommandsLayoutCreateInfoNV.Buffer instance backed by the specified container.

Changes to the container's content will be visible to the struct buffer instance and vice versa. The two buffers' position, limit, and mark values will be independent. The new buffer's position will be zero, its capacity and its limit will be the number of bytes remaining in this buffer divided by VkIndirectCommandsLayoutCreateInfoNV#SIZEOF, and its mark will be undefined.

The created buffer instance holds a strong reference to the container object.

Buffer	back to summary
public Buffer(long address, int cap)

Buffer	back to summary
pack-priv Buffer(long address, ByteBuffer container, int mark, int pos, int lim, int cap)

Method Detail

flags	back to summary
public int flags() Returns:int the value of the `VkIndirectCommandsLayoutCreateInfoNV#flags` field. Annotations @NativeType:VkIndirectCommandsLayoutUsageFlagsNV

flags	back to summary
public VkIndirectCommandsLayoutCreateInfoNV.Buffer flags(int value) Sets the specified value to the `VkIndirectCommandsLayoutCreateInfoNV#flags` field.

getElementFactory

back to summary

protected VkIndirectCommandsLayoutCreateInfoNV getElementFactory()

Implements abstract org.lwjgl.system.StructBuffer.getElementFactory.

Annotations

@Override

pipelineBindPoint	back to summary
public int pipelineBindPoint() Returns:int the value of the `VkIndirectCommandsLayoutCreateInfoNV#pipelineBindPoint` field. Annotations @NativeType:VkPipelineBindPoint

pipelineBindPoint	back to summary
public VkIndirectCommandsLayoutCreateInfoNV.Buffer pipelineBindPoint(int value) Sets the specified value to the `VkIndirectCommandsLayoutCreateInfoNV#pipelineBindPoint` field.

pNext	back to summary
public long pNext() Returns:long the value of the `VkIndirectCommandsLayoutCreateInfoNV#pNext` field. Annotations @NativeType:void const *

pNext	back to summary
public VkIndirectCommandsLayoutCreateInfoNV.Buffer pNext(long value) Sets the specified value to the `VkIndirectCommandsLayoutCreateInfoNV#pNext` field.

pStreamStrides	back to summary
public IntBuffer pStreamStrides() Returns:IntBuffer a `IntBuffer` view of the data pointed to by the `VkIndirectCommandsLayoutCreateInfoNV#pStreamStrides` field. Annotations @NativeType:uint32_t const *

pStreamStrides	back to summary
public VkIndirectCommandsLayoutCreateInfoNV.Buffer pStreamStrides(IntBuffer value) Sets the address of the specified `IntBuffer` to the `VkIndirectCommandsLayoutCreateInfoNV#pStreamStrides` field.

pTokens	back to summary
public VkIndirectCommandsLayoutTokenNV.Buffer pTokens() Returns:VkIndirectCommandsLayoutTokenNV.Buffer a `VkIndirectCommandsLayoutTokenNV.Buffer` view of the struct array pointed to by the `VkIndirectCommandsLayoutCreateInfoNV#pTokens` field. Annotations @NativeType:VkIndirectCommandsLayoutTokenNV const *

pTokens	back to summary
public VkIndirectCommandsLayoutCreateInfoNV.Buffer pTokens(VkIndirectCommandsLayoutTokenNV.Buffer value) Sets the address of the specified `VkIndirectCommandsLayoutTokenNV.Buffer` to the `VkIndirectCommandsLayoutCreateInfoNV#pTokens` field.

self

back to summary

protected VkIndirectCommandsLayoutCreateInfoNV.Buffer self()

Implements abstract org.lwjgl.system.CustomBuffer.self.

Annotations

@Override

streamCount	back to summary
public int streamCount() Returns:int the value of the `VkIndirectCommandsLayoutCreateInfoNV#streamCount` field. Annotations @NativeType:uint32_t

sType	back to summary
public int sType() Returns:int the value of the `VkIndirectCommandsLayoutCreateInfoNV#sType` field. Annotations @NativeType:VkStructureType

sType	back to summary
public VkIndirectCommandsLayoutCreateInfoNV.Buffer sType(int value) Sets the specified value to the `VkIndirectCommandsLayoutCreateInfoNV#sType` field.

sType$Default	back to summary
public VkIndirectCommandsLayoutCreateInfoNV.Buffer sType$Default() Sets the `STRUCTURE_TYPE_INDIRECT_COMMANDS_LAYOUT_CREATE_INFO_NV` value to the `VkIndirectCommandsLayoutCreateInfoNV#sType` field.

tokenCount	back to summary
public int tokenCount() Returns:int the value of the `VkIndirectCommandsLayoutCreateInfoNV#tokenCount` field. Annotations @NativeType:uint32_t

public Class VkIndirectCommandsLayoutCreateInfoNV

Description

Note

Valid Usage

Valid Usage (Implicit)

See Also

Layout

Nested and Inner Type Summary

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail

public Class VkIndirectCommandsLayoutCreateInfoNV.Buffer

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail