LWJGL 3.3.3 · org.lwjgl.vulkan.VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM

Set the multiview per view render areas for a render pass instance.

Description

If perViewRenderAreaCount is not zero, then the elements of pPerViewRenderAreas override the value of VkRenderPassBeginInfo::renderArea or VkRenderingInfo::renderArea and define per-view render areas for the individual views of a multiview render pass. The render area for the view with view index i is specified by pPerViewRenderAreas[i].

The per-view render areas define per-view regions of attachments that are loaded, stored, and resolved according to the loadOp, storeOp, and resolveMode values of the render pass instance. When per-view render areas are defined, the value of VkRenderPassBeginInfo::renderArea or VkRenderingInfo::renderArea must be set to a render area that includes the union of all per-view render areas, may be used by the implementation for optimizations, but does not affect loads, stores, or resolves.

If this structure is present and if perViewRenderAreaCount is not zero, then perViewRenderAreaCount must be at least least one greater than the most significant bit set in any any element of VkRenderPassMultiviewCreateInfo::pViewMasks. or VkRenderingInfo::viewMask

If this structure is not present or if perViewRenderAreaCount is zero, VkRenderPassBeginInfo::renderArea or VkRenderingInfo::renderArea is used for all views.

Valid Usage

The offset.x member of any element of pPerViewRenderAreas must be greater than or equal to 0
The offset.y member of any element of pPerViewRenderAreas must be greater than or equal to 0
The sum of the offset.x and extent.width members of any element of pPerViewRenderAreas must be less than or equal to maxFramebufferWidth
The sum of the offset.y and extent.height members of any element of pPerViewRenderAreas must be less than or equal to maxFramebufferHeight
If this structure is in the pNext chain of VkRenderPassBeginInfo and if the render pass object included an element in VkRenderPassMultiviewCreateInfo::pViewMasks that set bit n, then perViewRenderAreaCount must be at least equal to n+1.
If this structure is in the pNext chain of VkRenderingInfo and if VkRenderingInfo::viewMask set bit n, then perViewRenderAreaCount must be at least equal to n+1.

Valid Usage (Implicit)

sType must be STRUCTURE_TYPE_MULTIVIEW_PER_VIEW_RENDER_AREAS_RENDER_PASS_BEGIN_INFO_QCOM
If perViewRenderAreaCount is not 0, pPerViewRenderAreas must be a valid pointer to an array of perViewRenderAreaCount VkRect2D structures

Layout


struct VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM {
    VkStructureType sType;
    void const * pNext;
    uint32_t perViewRenderAreaCount;
    VkRect2D const * pPerViewRenderAreas;
}

Nested and Inner Type Summary

Modifier and Type	Class and Description
public static class	VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer An array of `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` structs.

Field Summary

Modifier and Type	Field and Description
public static final int	ALIGNOF The struct alignment in bytes.
public static final int	PERVIEWRENDERAREACOUNT The struct member offsets.
public static final int	PNEXT The struct member offsets.
public static final int	PPERVIEWRENDERAREAS The struct member offsets.
public static final int	SIZEOF The struct size in bytes.
public static final int	STYPE The struct member offsets.

Inherited from org.lwjgl.system.Struct:: container DEFAULT_ALIGN_AS DEFAULT_PACK_ALIGNMENT

Constructor Summary

Access	Constructor and Description
protected	VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM(long address, ByteBuffer container)
public	VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM(ByteBuffer container) Creates a `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance at the current position of the specified `ByteBuffer` container.

Method Summary

Modifier and Type	Method and Description
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	calloc() Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance allocated with `memCalloc`.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	calloc(int the buffer capacity capacity) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance allocated with `memCalloc`.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	calloc(MemoryStack the stack from which to allocate stack) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance allocated on the specified `MemoryStack` and initializes all its bits to zero.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	calloc(int the buffer capacity capacity, MemoryStack the stack from which to allocate stack) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance allocated on the specified `MemoryStack` and initializes all its bits to zero.
protected VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	create(long the struct memory address address, ByteBuffer an optional container buffer, to be referenced strongly by the struct instance. container) Implements abstract org.lwjgl.system.Struct.create. Similar to `the constructor`, but returns the exact type of the `Struct` subclass.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	create() Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance allocated with `BufferUtils`.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	create(long address) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance for the specified memory address.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	create(int the buffer capacity capacity) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance allocated with `BufferUtils`.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	create(long the memory address address, int the buffer capacity capacity) Create a `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance at the specified memory.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	createSafe(long address) Like `create`, but returns `null` if `address` is `NULL`.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	createSafe(long address, int capacity) Like `create`, but returns `null` if `address` is `NULL`.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	malloc() Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance allocated with `memAlloc`.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	malloc(int the buffer capacity capacity) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance allocated with `memAlloc`.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	malloc(MemoryStack the stack from which to allocate stack) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance allocated on the specified `MemoryStack`.
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	malloc(int the buffer capacity capacity, MemoryStack the stack from which to allocate stack) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance allocated on the specified `MemoryStack`.
public static int	nperViewRenderAreaCount(long struct) Unsafe version of `perViewRenderAreaCount`.
public static void	nperViewRenderAreaCount(long struct, int value) Sets the specified value to the `perViewRenderAreaCount` field of the specified `struct`.
public static long	npNext(long struct) Unsafe version of `pNext`.
public static void	npNext(long struct, long value) Unsafe version of `pNext`.
public static VkRect2D.Buffer	npPerViewRenderAreas(long struct) Unsafe version of `pPerViewRenderAreas`.
public static void	npPerViewRenderAreas(long struct, VkRect2D.Buffer value) Unsafe version of `pPerViewRenderAreas`.
public static int	nsType(long struct) Unsafe version of `sType`.
public static void	nsType(long struct, int value) Unsafe version of `sType`.
public int	perViewRenderAreaCount() the number of elements in the `pPerViewRenderAreas` array.
public long	pNext() `NULL` or a pointer to a structure extending this structure.
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	pNext(long value) Sets the specified value to the `pNext` field.
public VkRect2D.Buffer	pPerViewRenderAreas() a pointer to an array of `VkRect2D` structures defining the render area for each view.
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	pPerViewRenderAreas(VkRect2D.Buffer value) Sets the address of the specified `VkRect2D.Buffer` to the `pPerViewRenderAreas` field.
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	set(int sType, long pNext, VkRect2D.Buffer pPerViewRenderAreas) Initializes this struct with the specified values.
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	Returns: this struct set(VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM the source struct src) Copies the specified struct data to this struct.
public int	sizeof() Implements abstract org.lwjgl.system.Struct.sizeof. Returns `sizeof(struct)`.
public int	sType() a `VkStructureType` value identifying this structure.
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	sType(int value) Sets the specified value to the `sType` field.
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	sType$Default() Sets the `STRUCTURE_TYPE_MULTIVIEW_PER_VIEW_RENDER_AREAS_RENDER_PASS_BEGIN_INFO_QCOM` value to the `sType` field.
public static void	validate(long the struct to validate struct) Validates pointer members that should not be `NULL`.

Field Detail

ALIGNOF	back to summary
public static final int ALIGNOF The struct alignment in bytes.

PERVIEWRENDERAREACOUNT	back to summary
public static final int PERVIEWRENDERAREACOUNT The struct member offsets.

PNEXT	back to summary
public static final int PNEXT The struct member offsets.

PPERVIEWRENDERAREAS	back to summary
public static final int PPERVIEWRENDERAREAS The struct member offsets.

SIZEOF	back to summary
public static final int SIZEOF The struct size in bytes.

STYPE	back to summary
public static final int STYPE The struct member offsets.

Constructor Detail

VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	back to summary
protected VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM(long address, ByteBuffer container)

VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM back to summary

VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	back to summary
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM(ByteBuffer container) Creates a `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance at the current position of the specified `ByteBuffer` container. Changes to the buffer's content will be visible to the struct instance and vice versa. The created instance holds a strong reference to the container object.

public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM(ByteBuffer container)

Creates a VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM instance at the current position of the specified ByteBuffer container. Changes to the buffer's content will be visible to the struct instance and vice versa.

The created instance holds a strong reference to the container object.

Method Detail

calloc	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM calloc() Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance allocated with `memCalloc`. The instance must be explicitly freed.

calloc back to summary

calloc	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer calloc(int capacity) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance allocated with `memCalloc`. The instance must be explicitly freed. Parameters capacity:int the buffer capacity

public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer calloc(int capacity)

Returns a new VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer instance allocated with memCalloc. The instance must be explicitly freed.

Parameters

capacity:int: the buffer capacity

calloc back to summary

calloc	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM calloc(MemoryStack stack) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance allocated on the specified `MemoryStack` and initializes all its bits to zero. Parameters stack:MemoryStack the stack from which to allocate

public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM calloc(MemoryStack stack)

Returns a new VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM instance allocated on the specified MemoryStack and initializes all its bits to zero.

Parameters

stack:MemoryStack: the stack from which to allocate

calloc back to summary

calloc	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer calloc(int capacity, MemoryStack stack) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance allocated on the specified `MemoryStack` and initializes all its bits to zero. Parameters capacity:int the buffer capacity stack:MemoryStack the stack from which to allocate

public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer calloc(int capacity, MemoryStack stack)

Returns a new VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer instance allocated on the specified MemoryStack and initializes all its bits to zero.

Parameters

capacity:int: the buffer capacity
stack:MemoryStack: the stack from which to allocate

create back to summary

create	back to summary
protected VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM create(long address, ByteBuffer container) Implements abstract org.lwjgl.system.Struct.create. Doc from org.lwjgl.system.Struct.create. Similar to `the constructor`, but returns the exact type of the `Struct` subclass. Effectively, every `Struct` instance is a factory for more instances of the same type. This is used by `StructBuffer`. Parameters address:long the struct memory address container:ByteBuffer an optional container buffer, to be referenced strongly by the struct instance. Annotations @Override

protected VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM create(long address, ByteBuffer container)

Implements abstract org.lwjgl.system.Struct.create.

Doc from org.lwjgl.system.Struct.create.

Similar to the constructor, but returns the exact type of the Struct subclass.

Effectively, every Struct instance is a factory for more instances of the same type. This is used by StructBuffer.

Parameters

address:long: the struct memory address
container:ByteBuffer: an optional container buffer, to be referenced strongly by the struct instance.

Annotations

@Override

create	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM create() Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance allocated with `BufferUtils`.

create	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM create(long address) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance for the specified memory address.

create back to summary

create	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer create(int capacity) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance allocated with `BufferUtils`. Parameters capacity:int the buffer capacity

public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer create(int capacity)

Returns a new VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer instance allocated with BufferUtils.

Parameters

capacity:int: the buffer capacity

create back to summary

create	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer create(long address, int capacity) Create a `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance at the specified memory. Parameters address:long the memory address capacity:int the buffer capacity

public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer create(long address, int capacity)

Create a VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer instance at the specified memory.

Parameters

address:long: the memory address
capacity:int: the buffer capacity

createSafe back to summary

createSafe	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM createSafe(long address) Like `create`, but returns `null` if `address` is `NULL`. Annotations @Nullable

public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM createSafe(long address)

Like create, but returns null if address is NULL.

Annotations

@Nullable

createSafe back to summary

createSafe	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer createSafe(long address, int capacity) Like `create`, but returns `null` if `address` is `NULL`. Annotations @Nullable

public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer createSafe(long address, int capacity)

Like create, but returns null if address is NULL.

Annotations

@Nullable

malloc	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM malloc() Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance allocated with `memAlloc`. The instance must be explicitly freed.

malloc back to summary

malloc	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer malloc(int capacity) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance allocated with `memAlloc`. The instance must be explicitly freed. Parameters capacity:int the buffer capacity

public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer malloc(int capacity)

Returns a new VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer instance allocated with memAlloc. The instance must be explicitly freed.

Parameters

capacity:int: the buffer capacity

malloc back to summary

malloc	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM malloc(MemoryStack stack) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM` instance allocated on the specified `MemoryStack`. Parameters stack:MemoryStack the stack from which to allocate

public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM malloc(MemoryStack stack)

Returns a new VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM instance allocated on the specified MemoryStack.

Parameters

stack:MemoryStack: the stack from which to allocate

malloc back to summary

malloc	back to summary
public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer malloc(int capacity, MemoryStack stack) Returns a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance allocated on the specified `MemoryStack`. Parameters capacity:int the buffer capacity stack:MemoryStack the stack from which to allocate

public static VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer malloc(int capacity, MemoryStack stack)

Returns a new VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer instance allocated on the specified MemoryStack.

Parameters

capacity:int: the buffer capacity
stack:MemoryStack: the stack from which to allocate

nperViewRenderAreaCount	back to summary
public static int nperViewRenderAreaCount(long struct) Unsafe version of `perViewRenderAreaCount`.

nperViewRenderAreaCount	back to summary
public static void nperViewRenderAreaCount(long struct, int value) Sets the specified value to the `perViewRenderAreaCount` field of the specified `struct`.

npNext	back to summary
public static long npNext(long struct) Unsafe version of `pNext`.

npNext	back to summary
public static void npNext(long struct, long value) Unsafe version of `pNext`.

npPerViewRenderAreas back to summary

npPerViewRenderAreas	back to summary
public static VkRect2D.Buffer npPerViewRenderAreas(long struct) Unsafe version of `pPerViewRenderAreas`. Annotations @Nullable

public static VkRect2D.Buffer npPerViewRenderAreas(long struct)

Unsafe version of pPerViewRenderAreas.

Annotations

@Nullable

npPerViewRenderAreas	back to summary
public static void npPerViewRenderAreas(long struct, VkRect2D.Buffer value) Unsafe version of `pPerViewRenderAreas`.

nsType	back to summary
public static int nsType(long struct) Unsafe version of `sType`.

nsType	back to summary
public static void nsType(long struct, int value) Unsafe version of `sType`.

perViewRenderAreaCount back to summary

perViewRenderAreaCount	back to summary
public int perViewRenderAreaCount() the number of elements in the `pPerViewRenderAreas` array. Annotations @NativeType:uint32_t

public int perViewRenderAreaCount()

the number of elements in the pPerViewRenderAreas array.

Annotations

@NativeType:uint32_t

pNext back to summary

pNext	back to summary
public long pNext() `NULL` or a pointer to a structure extending this structure. Annotations @NativeType:void const *

public long pNext()

NULL or a pointer to a structure extending this structure.

Annotations

@NativeType:void const *

pNext	back to summary
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM pNext(long value) Sets the specified value to the `pNext` field.

pPerViewRenderAreas back to summary

pPerViewRenderAreas	back to summary
public VkRect2D.Buffer pPerViewRenderAreas() a pointer to an array of `VkRect2D` structures defining the render area for each view. Annotations @Nullable @NativeType:VkRect2D const *

public VkRect2D.Buffer pPerViewRenderAreas()

a pointer to an array of VkRect2D structures defining the render area for each view.

Annotations

@Nullable
@NativeType:VkRect2D const *

pPerViewRenderAreas	back to summary
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM pPerViewRenderAreas(VkRect2D.Buffer value) Sets the address of the specified `VkRect2D.Buffer` to the `pPerViewRenderAreas` field.

set	back to summary
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM set(int sType, long pNext, VkRect2D.Buffer pPerViewRenderAreas) Initializes this struct with the specified values.

set	back to summary
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM set(VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM src) Copies the specified struct data to this struct. Parameters src:VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM the source struct Returns:VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM this struct

set

back to summary

public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM set(VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM src)

Copies the specified struct data to this struct.

Parameters

src:VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM: the source struct

Returns:VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM

this struct

sizeof back to summary

sizeof	back to summary
public int sizeof() Implements abstract org.lwjgl.system.Struct.sizeof. Doc from org.lwjgl.system.Struct.sizeof. Returns `sizeof(struct)`. Annotations @Override

public int sizeof()

Implements abstract org.lwjgl.system.Struct.sizeof.

Doc from org.lwjgl.system.Struct.sizeof.

Returns sizeof(struct).

Annotations

@Override

sType back to summary

sType	back to summary
public int sType() a `VkStructureType` value identifying this structure. Annotations @NativeType:VkStructureType

public int sType()

a VkStructureType value identifying this structure.

Annotations

@NativeType:VkStructureType

sType	back to summary
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM sType(int value) Sets the specified value to the `sType` field.

sType$Default	back to summary
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM sType$Default() Sets the `STRUCTURE_TYPE_MULTIVIEW_PER_VIEW_RENDER_AREAS_RENDER_PASS_BEGIN_INFO_QCOM` value to the `sType` field.

validate back to summary

validate	back to summary
public static void validate(long struct) Validates pointer members that should not be `NULL`. Parameters struct:long the struct to validate

public static void validate(long struct)

Validates pointer members that should not be NULL.

Parameters

struct:long: the struct to validate

Modifier and Type	Method and Description
protected VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM	getElementFactory() Implements abstract org.lwjgl.system.StructBuffer.getElementFactory.
public int	Returns: the value of the `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM#perViewRenderAreaCount` field. perViewRenderAreaCount()
public long	Returns: the value of the `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM#pNext` field. pNext()
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	pNext(long value) Sets the specified value to the `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM#pNext` field.
public VkRect2D.Buffer	Returns: a `VkRect2D.Buffer` view of the struct array pointed to by the `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM#pPerViewRenderAreas` field. pPerViewRenderAreas()
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	pPerViewRenderAreas(VkRect2D.Buffer value) Sets the address of the specified `VkRect2D.Buffer` to the `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM#pPerViewRenderAreas` field.
protected VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	self() Implements abstract org.lwjgl.system.CustomBuffer.self.
public int	Returns: the value of the `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM#sType` field. sType()
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	sType(int value) Sets the specified value to the `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM#sType` field.
public VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer	sType$Default() Sets the `STRUCTURE_TYPE_MULTIVIEW_PER_VIEW_RENDER_AREAS_RENDER_PASS_BEGIN_INFO_QCOM` value to the `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM#sType` field.

public Class VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM

Description

Valid Usage

Valid Usage (Implicit)

See Also

Layout

Nested and Inner Type Summary

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail

public Class VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail

Access	Constructor and Description
public	Buffer(ByteBuffer container) Creates a new `VkMultiviewPerViewRenderAreasRenderPassBeginInfoQCOM.Buffer` instance backed by the specified container.
public	Buffer(long address, int cap)
pack-priv	Buffer(long address, ByteBuffer container, int mark, int pos, int lim, int cap)