Structure specifying the extended vertex input binding description.

Valid Usage

binding must be less than VkPhysicalDeviceLimits::maxVertexInputBindings
stride must be less than or equal to VkPhysicalDeviceLimits::maxVertexInputBindingStride
If the vertexAttributeInstanceRateZeroDivisor feature is not enabled, divisor must not be 0
If the vertexAttributeInstanceRateDivisor feature is not enabled, divisor must be 1
divisor must be a value between 0 and VkPhysicalDeviceVertexAttributeDivisorPropertiesEXT::maxVertexAttribDivisor, inclusive
If divisor is not 1 then inputRate must be of type VERTEX_INPUT_RATE_INSTANCE

Valid Usage (Implicit)

sType must be STRUCTURE_TYPE_VERTEX_INPUT_BINDING_DESCRIPTION_2_EXT
inputRate must be a valid VkVertexInputRate value

Layout


struct VkVertexInputBindingDescription2EXT {
    VkStructureType sType;
    void * pNext;
    uint32_t binding;
    uint32_t stride;
    VkVertexInputRate inputRate;
    uint32_t divisor;
}

Nested and Inner Type Summary

Modifier and Type	Class and Description
public static class	VkVertexInputBindingDescription2EXT.Buffer An array of `VkVertexInputBindingDescription2EXT` structs.

Field Summary

Modifier and Type	Field and Description
public static final int	ALIGNOF The struct alignment in bytes.
public static final int	BINDING The struct member offsets.
public static final int	DIVISOR The struct member offsets.
public static final int	INPUTRATE The struct member offsets.
public static final int	PNEXT The struct member offsets.
public static final int	SIZEOF The struct size in bytes.
public static final int	STRIDE The struct member offsets.
public static final int	STYPE The struct member offsets.

Inherited from org.lwjgl.system.Struct:: container DEFAULT_ALIGN_AS DEFAULT_PACK_ALIGNMENT

Constructor Summary

Access	Constructor and Description
protected	VkVertexInputBindingDescription2EXT(long address, ByteBuffer container)
public	VkVertexInputBindingDescription2EXT(ByteBuffer container) Creates a `VkVertexInputBindingDescription2EXT` instance at the current position of the specified `ByteBuffer` container.

Method Summary

Modifier and Type	Method and Description
public int	binding() the binding number that this structure describes.
public VkVertexInputBindingDescription2EXT	binding(int value) Sets the specified value to the `binding` field.
public static VkVertexInputBindingDescription2EXT	calloc() Returns a new `VkVertexInputBindingDescription2EXT` instance allocated with `memCalloc`.
public static VkVertexInputBindingDescription2EXT.Buffer	calloc(int the buffer capacity capacity) Returns a new `VkVertexInputBindingDescription2EXT.Buffer` instance allocated with `memCalloc`.
public static VkVertexInputBindingDescription2EXT	calloc(MemoryStack the stack from which to allocate stack) Returns a new `VkVertexInputBindingDescription2EXT` instance allocated on the specified `MemoryStack` and initializes all its bits to zero.
public static VkVertexInputBindingDescription2EXT.Buffer	calloc(int the buffer capacity capacity, MemoryStack the stack from which to allocate stack) Returns a new `VkVertexInputBindingDescription2EXT.Buffer` instance allocated on the specified `MemoryStack` and initializes all its bits to zero.
protected VkVertexInputBindingDescription2EXT	create(long the struct memory address address, ByteBuffer an optional container buffer, to be referenced strongly by the struct instance. container) Implements abstract org.lwjgl.system.Struct.create. Similar to `the constructor`, but returns the exact type of the `Struct` subclass.
public static VkVertexInputBindingDescription2EXT	create() Returns a new `VkVertexInputBindingDescription2EXT` instance allocated with `BufferUtils`.
public static VkVertexInputBindingDescription2EXT	create(long address) Returns a new `VkVertexInputBindingDescription2EXT` instance for the specified memory address.
public static VkVertexInputBindingDescription2EXT.Buffer	create(int the buffer capacity capacity) Returns a new `VkVertexInputBindingDescription2EXT.Buffer` instance allocated with `BufferUtils`.
public static VkVertexInputBindingDescription2EXT.Buffer	create(long the memory address address, int the buffer capacity capacity) Create a `VkVertexInputBindingDescription2EXT.Buffer` instance at the specified memory.
public static VkVertexInputBindingDescription2EXT	createSafe(long address) Like `create`, but returns `null` if `address` is `NULL`.
public static VkVertexInputBindingDescription2EXT.Buffer	createSafe(long address, int capacity) Like `create`, but returns `null` if `address` is `NULL`.
public int	divisor() the number of successive instances that will use the same value of the vertex attribute when instanced rendering is enabled.
public VkVertexInputBindingDescription2EXT	divisor(int value) Sets the specified value to the `divisor` field.
public int	inputRate() a `VkVertexInputRate` value specifying whether vertex attribute addressing is a function of the vertex index or of the instance index.
public VkVertexInputBindingDescription2EXT	inputRate(int value) Sets the specified value to the `inputRate` field.
public static VkVertexInputBindingDescription2EXT	malloc() Returns a new `VkVertexInputBindingDescription2EXT` instance allocated with `memAlloc`.
public static VkVertexInputBindingDescription2EXT.Buffer	malloc(int the buffer capacity capacity) Returns a new `VkVertexInputBindingDescription2EXT.Buffer` instance allocated with `memAlloc`.
public static VkVertexInputBindingDescription2EXT	malloc(MemoryStack the stack from which to allocate stack) Returns a new `VkVertexInputBindingDescription2EXT` instance allocated on the specified `MemoryStack`.
public static VkVertexInputBindingDescription2EXT.Buffer	malloc(int the buffer capacity capacity, MemoryStack the stack from which to allocate stack) Returns a new `VkVertexInputBindingDescription2EXT.Buffer` instance allocated on the specified `MemoryStack`.
public static int	nbinding(long struct) Unsafe version of `binding`.
public static void	nbinding(long struct, int value) Unsafe version of `binding`.
public static int	ndivisor(long struct) Unsafe version of `divisor`.
public static void	ndivisor(long struct, int value) Unsafe version of `divisor`.
public static int	ninputRate(long struct) Unsafe version of `inputRate`.
public static void	ninputRate(long struct, int value) Unsafe version of `inputRate`.
public static long	npNext(long struct) Unsafe version of `pNext`.
public static void	npNext(long struct, long value) Unsafe version of `pNext`.
public static int	nstride(long struct) Unsafe version of `stride`.
public static void	nstride(long struct, int value) Unsafe version of `stride`.
public static int	nsType(long struct) Unsafe version of `sType`.
public static void	nsType(long struct, int value) Unsafe version of `sType`.
public long	pNext() `NULL` or a pointer to a structure extending this structure.
public VkVertexInputBindingDescription2EXT	pNext(long value) Sets the specified value to the `pNext` field.
public VkVertexInputBindingDescription2EXT	set(int sType, long pNext, int binding, int stride, int inputRate, int divisor) Initializes this struct with the specified values.
public VkVertexInputBindingDescription2EXT	Returns: this struct set(VkVertexInputBindingDescription2EXT the source struct src) Copies the specified struct data to this struct.
public int	sizeof() Implements abstract org.lwjgl.system.Struct.sizeof. Returns `sizeof(struct)`.
public int	stride() the byte stride between consecutive elements within the buffer.
public VkVertexInputBindingDescription2EXT	stride(int value) Sets the specified value to the `stride` field.
public int	sType() a `VkStructureType` value identifying this structure.
public VkVertexInputBindingDescription2EXT	sType(int value) Sets the specified value to the `sType` field.
public VkVertexInputBindingDescription2EXT	sType$Default() Sets the `STRUCTURE_TYPE_VERTEX_INPUT_BINDING_DESCRIPTION_2_EXT` value to the `sType` field.

Field Detail

ALIGNOF	back to summary
public static final int ALIGNOF The struct alignment in bytes.

BINDING	back to summary
public static final int BINDING The struct member offsets.

DIVISOR	back to summary
public static final int DIVISOR The struct member offsets.

INPUTRATE	back to summary
public static final int INPUTRATE The struct member offsets.

PNEXT	back to summary
public static final int PNEXT The struct member offsets.

SIZEOF	back to summary
public static final int SIZEOF The struct size in bytes.

STRIDE	back to summary
public static final int STRIDE The struct member offsets.

STYPE	back to summary
public static final int STYPE The struct member offsets.

Constructor Detail

VkVertexInputBindingDescription2EXT	back to summary
protected VkVertexInputBindingDescription2EXT(long address, ByteBuffer container)

VkVertexInputBindingDescription2EXT back to summary

VkVertexInputBindingDescription2EXT	back to summary
public VkVertexInputBindingDescription2EXT(ByteBuffer container) Creates a `VkVertexInputBindingDescription2EXT` instance at the current position of the specified `ByteBuffer` container. Changes to the buffer's content will be visible to the struct instance and vice versa. The created instance holds a strong reference to the container object.

public VkVertexInputBindingDescription2EXT(ByteBuffer container)

Creates a VkVertexInputBindingDescription2EXT instance at the current position of the specified ByteBuffer container. Changes to the buffer's content will be visible to the struct instance and vice versa.

The created instance holds a strong reference to the container object.

Method Detail

binding	back to summary
public int binding() the binding number that this structure describes. Annotations @NativeType:uint32_t

binding

back to summary

public int binding()

the binding number that this structure describes.

Annotations

@NativeType:uint32_t

binding	back to summary
public VkVertexInputBindingDescription2EXT binding(int value) Sets the specified value to the `binding` field.

calloc	back to summary
public static VkVertexInputBindingDescription2EXT calloc() Returns a new `VkVertexInputBindingDescription2EXT` instance allocated with `memCalloc`. The instance must be explicitly freed.

calloc back to summary

calloc	back to summary
public static VkVertexInputBindingDescription2EXT.Buffer calloc(int capacity) Returns a new `VkVertexInputBindingDescription2EXT.Buffer` instance allocated with `memCalloc`. The instance must be explicitly freed. Parameters capacity:int the buffer capacity

public static VkVertexInputBindingDescription2EXT.Buffer calloc(int capacity)

Returns a new VkVertexInputBindingDescription2EXT.Buffer instance allocated with memCalloc. The instance must be explicitly freed.

Parameters

capacity:int: the buffer capacity

calloc back to summary

calloc	back to summary
public static VkVertexInputBindingDescription2EXT calloc(MemoryStack stack) Returns a new `VkVertexInputBindingDescription2EXT` instance allocated on the specified `MemoryStack` and initializes all its bits to zero. Parameters stack:MemoryStack the stack from which to allocate

public static VkVertexInputBindingDescription2EXT calloc(MemoryStack stack)

Returns a new VkVertexInputBindingDescription2EXT instance allocated on the specified MemoryStack and initializes all its bits to zero.

Parameters

stack:MemoryStack: the stack from which to allocate

calloc back to summary

calloc	back to summary
public static VkVertexInputBindingDescription2EXT.Buffer calloc(int capacity, MemoryStack stack) Returns a new `VkVertexInputBindingDescription2EXT.Buffer` instance allocated on the specified `MemoryStack` and initializes all its bits to zero. Parameters capacity:int the buffer capacity stack:MemoryStack the stack from which to allocate

public static VkVertexInputBindingDescription2EXT.Buffer calloc(int capacity, MemoryStack stack)

Returns a new VkVertexInputBindingDescription2EXT.Buffer instance allocated on the specified MemoryStack and initializes all its bits to zero.

Parameters

capacity:int: the buffer capacity
stack:MemoryStack: the stack from which to allocate

create back to summary

create	back to summary
protected VkVertexInputBindingDescription2EXT create(long address, ByteBuffer container) Implements abstract org.lwjgl.system.Struct.create. Doc from org.lwjgl.system.Struct.create. Similar to `the constructor`, but returns the exact type of the `Struct` subclass. Effectively, every `Struct` instance is a factory for more instances of the same type. This is used by `StructBuffer`. Parameters address:long the struct memory address container:ByteBuffer an optional container buffer, to be referenced strongly by the struct instance. Annotations @Override

protected VkVertexInputBindingDescription2EXT create(long address, ByteBuffer container)

Implements abstract org.lwjgl.system.Struct.create.

Doc from org.lwjgl.system.Struct.create.

Similar to the constructor, but returns the exact type of the Struct subclass.

Effectively, every Struct instance is a factory for more instances of the same type. This is used by StructBuffer.

Parameters

address:long: the struct memory address
container:ByteBuffer: an optional container buffer, to be referenced strongly by the struct instance.

Annotations

@Override

create	back to summary
public static VkVertexInputBindingDescription2EXT create() Returns a new `VkVertexInputBindingDescription2EXT` instance allocated with `BufferUtils`.

create	back to summary
public static VkVertexInputBindingDescription2EXT create(long address) Returns a new `VkVertexInputBindingDescription2EXT` instance for the specified memory address.

create back to summary

create	back to summary
public static VkVertexInputBindingDescription2EXT.Buffer create(int capacity) Returns a new `VkVertexInputBindingDescription2EXT.Buffer` instance allocated with `BufferUtils`. Parameters capacity:int the buffer capacity

public static VkVertexInputBindingDescription2EXT.Buffer create(int capacity)

Returns a new VkVertexInputBindingDescription2EXT.Buffer instance allocated with BufferUtils.

Parameters

capacity:int: the buffer capacity

create back to summary

create	back to summary
public static VkVertexInputBindingDescription2EXT.Buffer create(long address, int capacity) Create a `VkVertexInputBindingDescription2EXT.Buffer` instance at the specified memory. Parameters address:long the memory address capacity:int the buffer capacity

public static VkVertexInputBindingDescription2EXT.Buffer create(long address, int capacity)

Create a VkVertexInputBindingDescription2EXT.Buffer instance at the specified memory.

Parameters

address:long: the memory address
capacity:int: the buffer capacity

createSafe back to summary

createSafe	back to summary
public static VkVertexInputBindingDescription2EXT createSafe(long address) Like `create`, but returns `null` if `address` is `NULL`. Annotations @Nullable

public static VkVertexInputBindingDescription2EXT createSafe(long address)

Like create, but returns null if address is NULL.

Annotations

@Nullable

createSafe back to summary

createSafe	back to summary
public static VkVertexInputBindingDescription2EXT.Buffer createSafe(long address, int capacity) Like `create`, but returns `null` if `address` is `NULL`. Annotations @Nullable

public static VkVertexInputBindingDescription2EXT.Buffer createSafe(long address, int capacity)

Like create, but returns null if address is NULL.

Annotations

@Nullable

divisor back to summary

divisor	back to summary
public int divisor() the number of successive instances that will use the same value of the vertex attribute when instanced rendering is enabled. This member can be set to a value other than 1 if the `vertexAttributeInstanceRateDivisor` feature is enabled. For example, if the divisor is N, the same vertex attribute will be applied to N successive instances before moving on to the next vertex attribute. The maximum value of `divisor` is implementation-dependent and can be queried using `VkPhysicalDeviceVertexAttributeDivisorPropertiesEXT::maxVertexAttribDivisor`. A value of 0 can be used for the divisor if the `vertexAttributeInstanceRateZeroDivisor` feature is enabled. In this case, the same vertex attribute will be applied to all instances. Annotations @NativeType:uint32_t

public int divisor()

the number of successive instances that will use the same value of the vertex attribute when instanced rendering is enabled. This member can be set to a value other than 1 if the vertexAttributeInstanceRateDivisor feature is enabled. For example, if the divisor is N, the same vertex attribute will be applied to N successive instances before moving on to the next vertex attribute. The maximum value of divisor is implementation-dependent and can be queried using VkPhysicalDeviceVertexAttributeDivisorPropertiesEXT::maxVertexAttribDivisor. A value of 0 can be used for the divisor if the vertexAttributeInstanceRateZeroDivisor feature is enabled. In this case, the same vertex attribute will be applied to all instances.

Annotations

@NativeType:uint32_t

divisor	back to summary
public VkVertexInputBindingDescription2EXT divisor(int value) Sets the specified value to the `divisor` field.

inputRate back to summary

inputRate	back to summary
public int inputRate() a `VkVertexInputRate` value specifying whether vertex attribute addressing is a function of the vertex index or of the instance index. Annotations @NativeType:VkVertexInputRate

public int inputRate()

a VkVertexInputRate value specifying whether vertex attribute addressing is a function of the vertex index or of the instance index.

Annotations

@NativeType:VkVertexInputRate

inputRate	back to summary
public VkVertexInputBindingDescription2EXT inputRate(int value) Sets the specified value to the `inputRate` field.

malloc	back to summary
public static VkVertexInputBindingDescription2EXT malloc() Returns a new `VkVertexInputBindingDescription2EXT` instance allocated with `memAlloc`. The instance must be explicitly freed.

malloc back to summary

malloc	back to summary
public static VkVertexInputBindingDescription2EXT.Buffer malloc(int capacity) Returns a new `VkVertexInputBindingDescription2EXT.Buffer` instance allocated with `memAlloc`. The instance must be explicitly freed. Parameters capacity:int the buffer capacity

public static VkVertexInputBindingDescription2EXT.Buffer malloc(int capacity)

Returns a new VkVertexInputBindingDescription2EXT.Buffer instance allocated with memAlloc. The instance must be explicitly freed.

Parameters

capacity:int: the buffer capacity

malloc back to summary

malloc	back to summary
public static VkVertexInputBindingDescription2EXT malloc(MemoryStack stack) Returns a new `VkVertexInputBindingDescription2EXT` instance allocated on the specified `MemoryStack`. Parameters stack:MemoryStack the stack from which to allocate

public static VkVertexInputBindingDescription2EXT malloc(MemoryStack stack)

Returns a new VkVertexInputBindingDescription2EXT instance allocated on the specified MemoryStack.

Parameters

stack:MemoryStack: the stack from which to allocate

malloc back to summary

malloc	back to summary
public static VkVertexInputBindingDescription2EXT.Buffer malloc(int capacity, MemoryStack stack) Returns a new `VkVertexInputBindingDescription2EXT.Buffer` instance allocated on the specified `MemoryStack`. Parameters capacity:int the buffer capacity stack:MemoryStack the stack from which to allocate

public static VkVertexInputBindingDescription2EXT.Buffer malloc(int capacity, MemoryStack stack)

Returns a new VkVertexInputBindingDescription2EXT.Buffer instance allocated on the specified MemoryStack.

Parameters

capacity:int: the buffer capacity
stack:MemoryStack: the stack from which to allocate

nbinding	back to summary
public static int nbinding(long struct) Unsafe version of `binding`.

nbinding	back to summary
public static void nbinding(long struct, int value) Unsafe version of `binding`.

ndivisor	back to summary
public static int ndivisor(long struct) Unsafe version of `divisor`.

ndivisor	back to summary
public static void ndivisor(long struct, int value) Unsafe version of `divisor`.

ninputRate	back to summary
public static int ninputRate(long struct) Unsafe version of `inputRate`.

ninputRate	back to summary
public static void ninputRate(long struct, int value) Unsafe version of `inputRate`.

npNext	back to summary
public static long npNext(long struct) Unsafe version of `pNext`.

npNext	back to summary
public static void npNext(long struct, long value) Unsafe version of `pNext`.

nstride	back to summary
public static int nstride(long struct) Unsafe version of `stride`.

nstride	back to summary
public static void nstride(long struct, int value) Unsafe version of `stride`.

nsType	back to summary
public static int nsType(long struct) Unsafe version of `sType`.

nsType	back to summary
public static void nsType(long struct, int value) Unsafe version of `sType`.

pNext back to summary

pNext	back to summary
public long pNext() `NULL` or a pointer to a structure extending this structure. Annotations @NativeType:void *

public long pNext()

NULL or a pointer to a structure extending this structure.

Annotations

@NativeType:void *

pNext	back to summary
public VkVertexInputBindingDescription2EXT pNext(long value) Sets the specified value to the `pNext` field.

set	back to summary
public VkVertexInputBindingDescription2EXT set(int sType, long pNext, int binding, int stride, int inputRate, int divisor) Initializes this struct with the specified values.

set

back to summary

public VkVertexInputBindingDescription2EXT set(VkVertexInputBindingDescription2EXT src)

Copies the specified struct data to this struct.

Parameters

src:VkVertexInputBindingDescription2EXT: the source struct

Returns:VkVertexInputBindingDescription2EXT

this struct

sizeof back to summary

public int sizeof()

Implements abstract org.lwjgl.system.Struct.sizeof.

Doc from org.lwjgl.system.Struct.sizeof.

Returns sizeof(struct).

Annotations

@Override

stride

back to summary

public int stride()

the byte stride between consecutive elements within the buffer.

Annotations

@NativeType:uint32_t

stride	back to summary
public VkVertexInputBindingDescription2EXT stride(int value) Sets the specified value to the `stride` field.

sType back to summary

public int sType()

a VkStructureType value identifying this structure.

Annotations

@NativeType:VkStructureType

sType	back to summary
public VkVertexInputBindingDescription2EXT sType(int value) Sets the specified value to the `sType` field.

sType$Default	back to summary
public VkVertexInputBindingDescription2EXT sType$Default() Sets the `STRUCTURE_TYPE_VERTEX_INPUT_BINDING_DESCRIPTION_2_EXT` value to the `sType` field.

org.lwjgl.vulkan back to summary

public Class VkVertexInputBindingDescription2EXT.Buffer

Class Inheritance

extends StructBuffer<VkVertexInputBindingDescription2EXT, VkVertexInputBindingDescription2EXT.Buffer>
implements NativeResource

java.lang.Object
org.lwjgl.system.Pointer.Default
org.lwjgl.system.CustomBuffer
org.lwjgl.system.StructBuffer
org.lwjgl.vulkan.VkVertexInputBindingDescription2EXT.Buffer

All Implemented Interfaces

org.lwjgl.system.NativeResource, java.lang.AutoCloseable

An array of VkVertexInputBindingDescription2EXT structs.

Field Summary

Modifier and Type	Field and Description
private static final VkVertexInputBindingDescription2EXT	ELEMENT_FACTORY

Constructor Summary

Access	Constructor and Description
public	Buffer(ByteBuffer container) Creates a new `VkVertexInputBindingDescription2EXT.Buffer` instance backed by the specified container.
public	Buffer(long address, int cap)
pack-priv	Buffer(long address, ByteBuffer container, int mark, int pos, int lim, int cap)

Method Summary

Modifier and Type	Method and Description
public int	Returns: the value of the `VkVertexInputBindingDescription2EXT#binding` field. binding()
public VkVertexInputBindingDescription2EXT.Buffer	binding(int value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#binding` field.
public int	Returns: the value of the `VkVertexInputBindingDescription2EXT#divisor` field. divisor()
public VkVertexInputBindingDescription2EXT.Buffer	divisor(int value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#divisor` field.
protected VkVertexInputBindingDescription2EXT	getElementFactory() Implements abstract org.lwjgl.system.StructBuffer.getElementFactory.
public int	Returns: the value of the `VkVertexInputBindingDescription2EXT#inputRate` field. inputRate()
public VkVertexInputBindingDescription2EXT.Buffer	inputRate(int value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#inputRate` field.
public long	Returns: the value of the `VkVertexInputBindingDescription2EXT#pNext` field. pNext()
public VkVertexInputBindingDescription2EXT.Buffer	pNext(long value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#pNext` field.
protected VkVertexInputBindingDescription2EXT.Buffer	self() Implements abstract org.lwjgl.system.CustomBuffer.self.
public int	Returns: the value of the `VkVertexInputBindingDescription2EXT#stride` field. stride()
public VkVertexInputBindingDescription2EXT.Buffer	stride(int value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#stride` field.
public int	Returns: the value of the `VkVertexInputBindingDescription2EXT#sType` field. sType()
public VkVertexInputBindingDescription2EXT.Buffer	sType(int value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#sType` field.
public VkVertexInputBindingDescription2EXT.Buffer	sType$Default() Sets the `STRUCTURE_TYPE_VERTEX_INPUT_BINDING_DESCRIPTION_2_EXT` value to the `VkVertexInputBindingDescription2EXT#sType` field.

Inherited from org.lwjgl.system.StructBuffer:: apply apply forEach get get get get iterator parallelStream put put sizeof spliterator stream

Field Detail

ELEMENT_FACTORY	back to summary
private static final VkVertexInputBindingDescription2EXT ELEMENT_FACTORY

Constructor Detail

Buffer back to summary

public Buffer(ByteBuffer container)

Creates a new VkVertexInputBindingDescription2EXT.Buffer instance backed by the specified container.

Changes to the container's content will be visible to the struct buffer instance and vice versa. The two buffers' position, limit, and mark values will be independent. The new buffer's position will be zero, its capacity and its limit will be the number of bytes remaining in this buffer divided by VkVertexInputBindingDescription2EXT#SIZEOF, and its mark will be undefined.

The created buffer instance holds a strong reference to the container object.

Buffer	back to summary
public Buffer(long address, int cap)

Buffer	back to summary
pack-priv Buffer(long address, ByteBuffer container, int mark, int pos, int lim, int cap)

Method Detail

binding	back to summary
public int binding() Returns:int the value of the `VkVertexInputBindingDescription2EXT#binding` field. Annotations @NativeType:uint32_t

binding	back to summary
public VkVertexInputBindingDescription2EXT.Buffer binding(int value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#binding` field.

divisor	back to summary
public int divisor() Returns:int the value of the `VkVertexInputBindingDescription2EXT#divisor` field. Annotations @NativeType:uint32_t

divisor	back to summary
public VkVertexInputBindingDescription2EXT.Buffer divisor(int value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#divisor` field.

getElementFactory

back to summary

protected VkVertexInputBindingDescription2EXT getElementFactory()

Implements abstract org.lwjgl.system.StructBuffer.getElementFactory.

Annotations

@Override

inputRate	back to summary
public int inputRate() Returns:int the value of the `VkVertexInputBindingDescription2EXT#inputRate` field. Annotations @NativeType:VkVertexInputRate

inputRate	back to summary
public VkVertexInputBindingDescription2EXT.Buffer inputRate(int value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#inputRate` field.

pNext	back to summary
public long pNext() Returns:long the value of the `VkVertexInputBindingDescription2EXT#pNext` field. Annotations @NativeType:void *

pNext	back to summary
public VkVertexInputBindingDescription2EXT.Buffer pNext(long value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#pNext` field.

self

back to summary

protected VkVertexInputBindingDescription2EXT.Buffer self()

Implements abstract org.lwjgl.system.CustomBuffer.self.

Annotations

@Override

stride	back to summary
public int stride() Returns:int the value of the `VkVertexInputBindingDescription2EXT#stride` field. Annotations @NativeType:uint32_t

stride	back to summary
public VkVertexInputBindingDescription2EXT.Buffer stride(int value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#stride` field.

sType	back to summary
public int sType() Returns:int the value of the `VkVertexInputBindingDescription2EXT#sType` field. Annotations @NativeType:VkStructureType

sType	back to summary
public VkVertexInputBindingDescription2EXT.Buffer sType(int value) Sets the specified value to the `VkVertexInputBindingDescription2EXT#sType` field.

sType$Default	back to summary
public VkVertexInputBindingDescription2EXT.Buffer sType$Default() Sets the `STRUCTURE_TYPE_VERTEX_INPUT_BINDING_DESCRIPTION_2_EXT` value to the `VkVertexInputBindingDescription2EXT#sType` field.

public Class VkVertexInputBindingDescription2EXT

Valid Usage

Valid Usage (Implicit)

See Also

Layout

Nested and Inner Type Summary

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail

public Class VkVertexInputBindingDescription2EXT.Buffer

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail