Structure specifying a viewport.

Description

Note

Despite their names, minDepth can be less than, equal to, or greater than maxDepth.

The framebuffer depth coordinate z_f may be represented using either a fixed-point or floating-point representation. However, a floating-point representation must be used if the depth/stencil attachment has a floating-point depth component. If an m-bit fixed-point representation is used, we assume that it represents each value k / (2^m - 1), where k ∈ { 0, 1, …, 2^m-1 }, as k (e.g. 1.0 is represented in binary as a string of all ones).

The viewport parameters shown in the above equations are found from these values as

o_x = x + width / 2

o_y = y + height / 2

o_z = minDepth (or (maxDepth + minDepth) / 2 if VkPipelineViewportDepthClipControlCreateInfoEXT::negativeOneToOne is TRUE)

p_x = width

p_y = height

p_z = maxDepth - minDepth (or (maxDepth - minDepth) / 2 if VkPipelineViewportDepthClipControlCreateInfoEXT::negativeOneToOne is TRUE)

If a render pass transform is enabled, the values (p_x,p_y) and (o_x, o_y) defining the viewport are transformed as described in render pass transform before participating in the viewport transform.

The application can specify a negative term for height, which has the effect of negating the y coordinate in clip space before performing the transform. When using a negative height, the application should also adjust the y value to point to the lower left corner of the viewport instead of the upper left corner. Using the negative height allows the application to avoid having to negate the y component of the Position output from the last pre-rasterization shader stage.

The width and height of the implementation-dependent maximum viewport dimensions must be greater than or equal to the width and height of the largest image which can be created and attached to a framebuffer.

The floating-point viewport bounds are represented with an implementation-dependent precision.

Valid Usage

width must be greater than 0.0
width must be less than or equal to VkPhysicalDeviceLimits::maxViewportDimensions[0]
If the VK_KHR_maintenance1 extension is not enabled, the VK_AMD_negative_viewport_height extension is not enabled, and VkPhysicalDeviceProperties::apiVersion is less than Vulkan 1.1, height must be greater than 0.0
The absolute value of height must be less than or equal to VkPhysicalDeviceLimits::maxViewportDimensions[1]
x must be greater than or equal to viewportBoundsRange[0]
(x + width) must be less than or equal to viewportBoundsRange[1]
y must be greater than or equal to viewportBoundsRange[0]
y must be less than or equal to viewportBoundsRange[1]
(y + height) must be greater than or equal to viewportBoundsRange[0]
(y + height) must be less than or equal to viewportBoundsRange[1]
If the VK_EXT_depth_range_unrestricted extension is not enabled, minDepth must be between 0.0 and 1.0, inclusive
If the VK_EXT_depth_range_unrestricted extension is not enabled, maxDepth must be between 0.0 and 1.0, inclusive

Layout


struct VkViewport {
    float x;
    float y;
    float width;
    float height;
    float minDepth;
    float maxDepth;
}

Nested and Inner Type Summary

Modifier and Type	Class and Description
public static class	VkViewport.Buffer An array of `VkViewport` structs.

Field Summary

Modifier and Type	Field and Description
public static final int	ALIGNOF The struct alignment in bytes.
public static final int	HEIGHT The struct member offsets.
public static final int	MAXDEPTH The struct member offsets.
public static final int	MINDEPTH The struct member offsets.
public static final int	SIZEOF The struct size in bytes.
public static final int	WIDTH The struct member offsets.
public static final int	X The struct member offsets.
public static final int	Y The struct member offsets.

Inherited from org.lwjgl.system.Struct:: container DEFAULT_ALIGN_AS DEFAULT_PACK_ALIGNMENT

Constructor Summary

Access	Constructor and Description
protected	VkViewport(long address, ByteBuffer container)
public	VkViewport(ByteBuffer container) Creates a `VkViewport` instance at the current position of the specified `ByteBuffer` container.

Method Summary

Modifier and Type	Method and Description
public static VkViewport	calloc() Returns a new `VkViewport` instance allocated with `memCalloc`.
public static VkViewport.Buffer	calloc(int the buffer capacity capacity) Returns a new `VkViewport.Buffer` instance allocated with `memCalloc`.
public static VkViewport	calloc(MemoryStack the stack from which to allocate stack) Returns a new `VkViewport` instance allocated on the specified `MemoryStack` and initializes all its bits to zero.
public static VkViewport.Buffer	calloc(int the buffer capacity capacity, MemoryStack the stack from which to allocate stack) Returns a new `VkViewport.Buffer` instance allocated on the specified `MemoryStack` and initializes all its bits to zero.
public static VkViewport	callocStack() Deprecated Deprecated for removal in 3.4.0.
public static VkViewport	callocStack(MemoryStack stack) Deprecated Deprecated for removal in 3.4.0.
public static VkViewport.Buffer	callocStack(int capacity) Deprecated Deprecated for removal in 3.4.0.
public static VkViewport.Buffer	callocStack(int capacity, MemoryStack stack) Deprecated Deprecated for removal in 3.4.0.
protected VkViewport	create(long the struct memory address address, ByteBuffer an optional container buffer, to be referenced strongly by the struct instance. container) Implements abstract org.lwjgl.system.Struct.create. Similar to `the constructor`, but returns the exact type of the `Struct` subclass.
public static VkViewport	create() Returns a new `VkViewport` instance allocated with `BufferUtils`.
public static VkViewport	create(long address) Returns a new `VkViewport` instance for the specified memory address.
public static VkViewport.Buffer	create(int the buffer capacity capacity) Returns a new `VkViewport.Buffer` instance allocated with `BufferUtils`.
public static VkViewport.Buffer	create(long the memory address address, int the buffer capacity capacity) Create a `VkViewport.Buffer` instance at the specified memory.
public static VkViewport	createSafe(long address) Like `create`, but returns `null` if `address` is `NULL`.
public static VkViewport.Buffer	createSafe(long address, int capacity) Like `create`, but returns `null` if `address` is `NULL`.
public float	height() see `width`
public VkViewport	height(float value) Sets the specified value to the `height` field.
public static VkViewport	malloc() Returns a new `VkViewport` instance allocated with `memAlloc`.
public static VkViewport.Buffer	malloc(int the buffer capacity capacity) Returns a new `VkViewport.Buffer` instance allocated with `memAlloc`.
public static VkViewport	malloc(MemoryStack the stack from which to allocate stack) Returns a new `VkViewport` instance allocated on the specified `MemoryStack`.
public static VkViewport.Buffer	malloc(int the buffer capacity capacity, MemoryStack the stack from which to allocate stack) Returns a new `VkViewport.Buffer` instance allocated on the specified `MemoryStack`.
public static VkViewport	mallocStack() Deprecated Deprecated for removal in 3.4.0.
public static VkViewport	mallocStack(MemoryStack stack) Deprecated Deprecated for removal in 3.4.0.
public static VkViewport.Buffer	mallocStack(int capacity) Deprecated Deprecated for removal in 3.4.0.
public static VkViewport.Buffer	mallocStack(int capacity, MemoryStack stack) Deprecated Deprecated for removal in 3.4.0.
public float	maxDepth() see `minDepth`
public VkViewport	maxDepth(float value) Sets the specified value to the `maxDepth` field.
public float	minDepth() `minDepth` and `maxDepth` are the depth range for the viewport.
public VkViewport	minDepth(float value) Sets the specified value to the `minDepth` field.
public static float	nheight(long struct) Unsafe version of `height`.
public static void	nheight(long struct, float value) Unsafe version of `height`.
public static float	nmaxDepth(long struct) Unsafe version of `maxDepth`.
public static void	nmaxDepth(long struct, float value) Unsafe version of `maxDepth`.
public static float	nminDepth(long struct) Unsafe version of `minDepth`.
public static void	nminDepth(long struct, float value) Unsafe version of `minDepth`.
public static float	nwidth(long struct) Unsafe version of `width`.
public static void	nwidth(long struct, float value) Unsafe version of `width`.
public static float	nx(long struct) Unsafe version of `x`.
public static void	nx(long struct, float value) Unsafe version of `x`.
public static float	ny(long struct) Unsafe version of `y`.
public static void	ny(long struct, float value) Unsafe version of `y`.
public VkViewport	set(float x, float y, float width, float height, float minDepth, float maxDepth) Initializes this struct with the specified values.
public VkViewport	Returns: this struct set(VkViewport the source struct src) Copies the specified struct data to this struct.
public int	sizeof() Implements abstract org.lwjgl.system.Struct.sizeof. Returns `sizeof(struct)`.
public float	width() `width` and `height` are the viewport’s width and height, respectively.
public VkViewport	width(float value) Sets the specified value to the `width` field.
public float	x() `x` and `y` are the viewport’s upper left corner `(x,y)`.
public VkViewport	x(float value) Sets the specified value to the `x` field.
public float	y() see `x`
public VkViewport	y(float value) Sets the specified value to the `y` field.

Field Detail

ALIGNOF	back to summary
public static final int ALIGNOF The struct alignment in bytes.

HEIGHT	back to summary
public static final int HEIGHT The struct member offsets.

MAXDEPTH	back to summary
public static final int MAXDEPTH The struct member offsets.

MINDEPTH	back to summary
public static final int MINDEPTH The struct member offsets.

SIZEOF	back to summary
public static final int SIZEOF The struct size in bytes.

WIDTH	back to summary
public static final int WIDTH The struct member offsets.

X	back to summary
public static final int X The struct member offsets.

Y	back to summary
public static final int Y The struct member offsets.

Constructor Detail

VkViewport	back to summary
protected VkViewport(long address, ByteBuffer container)

VkViewport back to summary

VkViewport	back to summary
public VkViewport(ByteBuffer container) Creates a `VkViewport` instance at the current position of the specified `ByteBuffer` container. Changes to the buffer's content will be visible to the struct instance and vice versa. The created instance holds a strong reference to the container object.

public VkViewport(ByteBuffer container)

Creates a VkViewport instance at the current position of the specified ByteBuffer container. Changes to the buffer's content will be visible to the struct instance and vice versa.

The created instance holds a strong reference to the container object.

Method Detail

calloc	back to summary
public static VkViewport calloc() Returns a new `VkViewport` instance allocated with `memCalloc`. The instance must be explicitly freed.

calloc back to summary

calloc	back to summary
public static VkViewport.Buffer calloc(int capacity) Returns a new `VkViewport.Buffer` instance allocated with `memCalloc`. The instance must be explicitly freed. Parameters capacity:int the buffer capacity

public static VkViewport.Buffer calloc(int capacity)

Returns a new VkViewport.Buffer instance allocated with memCalloc. The instance must be explicitly freed.

Parameters

capacity:int: the buffer capacity

calloc back to summary

calloc	back to summary
public static VkViewport calloc(MemoryStack stack) Returns a new `VkViewport` instance allocated on the specified `MemoryStack` and initializes all its bits to zero. Parameters stack:MemoryStack the stack from which to allocate

public static VkViewport calloc(MemoryStack stack)

Returns a new VkViewport instance allocated on the specified MemoryStack and initializes all its bits to zero.

Parameters

stack:MemoryStack: the stack from which to allocate

calloc back to summary

calloc	back to summary
public static VkViewport.Buffer calloc(int capacity, MemoryStack stack) Returns a new `VkViewport.Buffer` instance allocated on the specified `MemoryStack` and initializes all its bits to zero. Parameters capacity:int the buffer capacity stack:MemoryStack the stack from which to allocate

public static VkViewport.Buffer calloc(int capacity, MemoryStack stack)

Returns a new VkViewport.Buffer instance allocated on the specified MemoryStack and initializes all its bits to zero.

Parameters

capacity:int: the buffer capacity
stack:MemoryStack: the stack from which to allocate

callocStack back to summary

callocStack	back to summary
public static VkViewport callocStack() Deprecated Deprecated for removal in 3.4.0. Use `calloc(MemoryStack)` instead. Annotations @Deprecated

public static VkViewport callocStack()

Deprecated

Deprecated for removal in 3.4.0. Use calloc(MemoryStack) instead.

Annotations

@Deprecated

callocStack back to summary

callocStack	back to summary
public static VkViewport callocStack(MemoryStack stack) Deprecated Deprecated for removal in 3.4.0. Use `calloc(MemoryStack)` instead. Annotations @Deprecated

public static VkViewport callocStack(MemoryStack stack)

Deprecated

Deprecated for removal in 3.4.0. Use calloc(MemoryStack) instead.

Annotations

@Deprecated

callocStack back to summary

callocStack	back to summary
public static VkViewport.Buffer callocStack(int capacity) Deprecated Deprecated for removal in 3.4.0. Use `calloc(int, MemoryStack)` instead. Annotations @Deprecated

public static VkViewport.Buffer callocStack(int capacity)

Deprecated

Deprecated for removal in 3.4.0. Use calloc(int, MemoryStack) instead.

Annotations

@Deprecated

callocStack back to summary

callocStack	back to summary
public static VkViewport.Buffer callocStack(int capacity, MemoryStack stack) Deprecated Deprecated for removal in 3.4.0. Use `calloc(int, MemoryStack)` instead. Annotations @Deprecated

public static VkViewport.Buffer callocStack(int capacity, MemoryStack stack)

Deprecated

Deprecated for removal in 3.4.0. Use calloc(int, MemoryStack) instead.

Annotations

@Deprecated

create back to summary

create	back to summary
protected VkViewport create(long address, ByteBuffer container) Implements abstract org.lwjgl.system.Struct.create. Doc from org.lwjgl.system.Struct.create. Similar to `the constructor`, but returns the exact type of the `Struct` subclass. Effectively, every `Struct` instance is a factory for more instances of the same type. This is used by `StructBuffer`. Parameters address:long the struct memory address container:ByteBuffer an optional container buffer, to be referenced strongly by the struct instance. Annotations @Override

protected VkViewport create(long address, ByteBuffer container)

Implements abstract org.lwjgl.system.Struct.create.

Doc from org.lwjgl.system.Struct.create.

Similar to the constructor, but returns the exact type of the Struct subclass.

Effectively, every Struct instance is a factory for more instances of the same type. This is used by StructBuffer.

Parameters

address:long: the struct memory address
container:ByteBuffer: an optional container buffer, to be referenced strongly by the struct instance.

Annotations

@Override

create	back to summary
public static VkViewport create() Returns a new `VkViewport` instance allocated with `BufferUtils`.

create	back to summary
public static VkViewport create(long address) Returns a new `VkViewport` instance for the specified memory address.

create back to summary

create	back to summary
public static VkViewport.Buffer create(int capacity) Returns a new `VkViewport.Buffer` instance allocated with `BufferUtils`. Parameters capacity:int the buffer capacity

public static VkViewport.Buffer create(int capacity)

Returns a new VkViewport.Buffer instance allocated with BufferUtils.

Parameters

capacity:int: the buffer capacity

create back to summary

create	back to summary
public static VkViewport.Buffer create(long address, int capacity) Create a `VkViewport.Buffer` instance at the specified memory. Parameters address:long the memory address capacity:int the buffer capacity

public static VkViewport.Buffer create(long address, int capacity)

Create a VkViewport.Buffer instance at the specified memory.

Parameters

address:long: the memory address
capacity:int: the buffer capacity

createSafe back to summary

createSafe	back to summary
public static VkViewport createSafe(long address) Like `create`, but returns `null` if `address` is `NULL`. Annotations @Nullable

public static VkViewport createSafe(long address)

Like create, but returns null if address is NULL.

Annotations

@Nullable

createSafe back to summary

createSafe	back to summary
public static VkViewport.Buffer createSafe(long address, int capacity) Like `create`, but returns `null` if `address` is `NULL`. Annotations @Nullable

public static VkViewport.Buffer createSafe(long address, int capacity)

Like create, but returns null if address is NULL.

Annotations

@Nullable

height	back to summary
public float height() see `width`

height	back to summary
public VkViewport height(float value) Sets the specified value to the `height` field.

malloc	back to summary
public static VkViewport malloc() Returns a new `VkViewport` instance allocated with `memAlloc`. The instance must be explicitly freed.

malloc back to summary

malloc	back to summary
public static VkViewport.Buffer malloc(int capacity) Returns a new `VkViewport.Buffer` instance allocated with `memAlloc`. The instance must be explicitly freed. Parameters capacity:int the buffer capacity

public static VkViewport.Buffer malloc(int capacity)

Returns a new VkViewport.Buffer instance allocated with memAlloc. The instance must be explicitly freed.

Parameters

capacity:int: the buffer capacity

malloc back to summary

malloc	back to summary
public static VkViewport malloc(MemoryStack stack) Returns a new `VkViewport` instance allocated on the specified `MemoryStack`. Parameters stack:MemoryStack the stack from which to allocate

public static VkViewport malloc(MemoryStack stack)

Returns a new VkViewport instance allocated on the specified MemoryStack.

Parameters

stack:MemoryStack: the stack from which to allocate

malloc back to summary

malloc	back to summary
public static VkViewport.Buffer malloc(int capacity, MemoryStack stack) Returns a new `VkViewport.Buffer` instance allocated on the specified `MemoryStack`. Parameters capacity:int the buffer capacity stack:MemoryStack the stack from which to allocate

public static VkViewport.Buffer malloc(int capacity, MemoryStack stack)

Returns a new VkViewport.Buffer instance allocated on the specified MemoryStack.

Parameters

capacity:int: the buffer capacity
stack:MemoryStack: the stack from which to allocate

mallocStack back to summary

mallocStack	back to summary
public static VkViewport mallocStack() Deprecated Deprecated for removal in 3.4.0. Use `malloc(MemoryStack)` instead. Annotations @Deprecated

public static VkViewport mallocStack()

Deprecated

Deprecated for removal in 3.4.0. Use malloc(MemoryStack) instead.

Annotations

@Deprecated

mallocStack back to summary

mallocStack	back to summary
public static VkViewport mallocStack(MemoryStack stack) Deprecated Deprecated for removal in 3.4.0. Use `malloc(MemoryStack)` instead. Annotations @Deprecated

public static VkViewport mallocStack(MemoryStack stack)

Deprecated

Deprecated for removal in 3.4.0. Use malloc(MemoryStack) instead.

Annotations

@Deprecated

mallocStack back to summary

mallocStack	back to summary
public static VkViewport.Buffer mallocStack(int capacity) Deprecated Deprecated for removal in 3.4.0. Use `malloc(int, MemoryStack)` instead. Annotations @Deprecated

public static VkViewport.Buffer mallocStack(int capacity)

Deprecated

Deprecated for removal in 3.4.0. Use malloc(int, MemoryStack) instead.

Annotations

@Deprecated

mallocStack back to summary

mallocStack	back to summary
public static VkViewport.Buffer mallocStack(int capacity, MemoryStack stack) Deprecated Deprecated for removal in 3.4.0. Use `malloc(int, MemoryStack)` instead. Annotations @Deprecated

public static VkViewport.Buffer mallocStack(int capacity, MemoryStack stack)

Deprecated

Deprecated for removal in 3.4.0. Use malloc(int, MemoryStack) instead.

Annotations

@Deprecated

maxDepth	back to summary
public float maxDepth() see `minDepth`

maxDepth	back to summary
public VkViewport maxDepth(float value) Sets the specified value to the `maxDepth` field.

minDepth	back to summary
public float minDepth() `minDepth` and `maxDepth` are the depth range for the viewport.

minDepth	back to summary
public VkViewport minDepth(float value) Sets the specified value to the `minDepth` field.

nheight	back to summary
public static float nheight(long struct) Unsafe version of `height`.

nheight	back to summary
public static void nheight(long struct, float value) Unsafe version of `height`.

nmaxDepth	back to summary
public static float nmaxDepth(long struct) Unsafe version of `maxDepth`.

nmaxDepth	back to summary
public static void nmaxDepth(long struct, float value) Unsafe version of `maxDepth`.

nminDepth	back to summary
public static float nminDepth(long struct) Unsafe version of `minDepth`.

nminDepth	back to summary
public static void nminDepth(long struct, float value) Unsafe version of `minDepth`.

nwidth	back to summary
public static float nwidth(long struct) Unsafe version of `width`.

nwidth	back to summary
public static void nwidth(long struct, float value) Unsafe version of `width`.

nx	back to summary
public static float nx(long struct) Unsafe version of `x`.

nx	back to summary
public static void nx(long struct, float value) Unsafe version of `x`.

ny	back to summary
public static float ny(long struct) Unsafe version of `y`.

ny	back to summary
public static void ny(long struct, float value) Unsafe version of `y`.

set	back to summary
public VkViewport set(float x, float y, float width, float height, float minDepth, float maxDepth) Initializes this struct with the specified values.

set

back to summary

public VkViewport set(VkViewport src)

Copies the specified struct data to this struct.

Parameters

src:VkViewport: the source struct

Returns:VkViewport

this struct

sizeof back to summary

public int sizeof()

Implements abstract org.lwjgl.system.Struct.sizeof.

Doc from org.lwjgl.system.Struct.sizeof.

Returns sizeof(struct).

Annotations

@Override

width	back to summary
public float width() `width` and `height` are the viewport’s width and height, respectively.

width	back to summary
public VkViewport width(float value) Sets the specified value to the `width` field.

x	back to summary
public float x() `x` and `y` are the viewport’s upper left corner `(x,y)`.

x	back to summary
public VkViewport x(float value) Sets the specified value to the `x` field.

y	back to summary
public float y() see `x`

y	back to summary
public VkViewport y(float value) Sets the specified value to the `y` field.

org.lwjgl.vulkan back to summary

public Class VkViewport.Buffer

Class Inheritance

extends StructBuffer<VkViewport, VkViewport.Buffer>
implements NativeResource

All Implemented Interfaces

org.lwjgl.system.NativeResource, java.lang.AutoCloseable

An array of VkViewport structs.

Field Summary

Modifier and Type	Field and Description
private static final VkViewport	ELEMENT_FACTORY

Constructor Summary

Access	Constructor and Description
public	Buffer(ByteBuffer container) Creates a new `VkViewport.Buffer` instance backed by the specified container.
public	Buffer(long address, int cap)
pack-priv	Buffer(long address, ByteBuffer container, int mark, int pos, int lim, int cap)

Method Summary

Modifier and Type	Method and Description
protected VkViewport	getElementFactory() Implements abstract org.lwjgl.system.StructBuffer.getElementFactory.
public float	Returns: the value of the `VkViewport#height` field. height()
public VkViewport.Buffer	height(float value) Sets the specified value to the `VkViewport#height` field.
public float	Returns: the value of the `VkViewport#maxDepth` field. maxDepth()
public VkViewport.Buffer	maxDepth(float value) Sets the specified value to the `VkViewport#maxDepth` field.
public float	Returns: the value of the `VkViewport#minDepth` field. minDepth()
public VkViewport.Buffer	minDepth(float value) Sets the specified value to the `VkViewport#minDepth` field.
protected VkViewport.Buffer	self() Implements abstract org.lwjgl.system.CustomBuffer.self.
public float	Returns: the value of the `VkViewport#width` field. width()
public VkViewport.Buffer	width(float value) Sets the specified value to the `VkViewport#width` field.
public float	Returns: the value of the `VkViewport#x` field. x()
public VkViewport.Buffer	x(float value) Sets the specified value to the `VkViewport#x` field.
public float	Returns: the value of the `VkViewport#y` field. y()
public VkViewport.Buffer	y(float value) Sets the specified value to the `VkViewport#y` field.

Inherited from org.lwjgl.system.StructBuffer:: apply apply forEach get get get get iterator parallelStream put put sizeof spliterator stream

Field Detail

ELEMENT_FACTORY	back to summary
private static final VkViewport ELEMENT_FACTORY

Constructor Detail

Buffer back to summary

public Buffer(ByteBuffer container)

Creates a new VkViewport.Buffer instance backed by the specified container.

Changes to the container's content will be visible to the struct buffer instance and vice versa. The two buffers' position, limit, and mark values will be independent. The new buffer's position will be zero, its capacity and its limit will be the number of bytes remaining in this buffer divided by VkViewport#SIZEOF, and its mark will be undefined.

The created buffer instance holds a strong reference to the container object.

Buffer	back to summary
public Buffer(long address, int cap)

Buffer	back to summary
pack-priv Buffer(long address, ByteBuffer container, int mark, int pos, int lim, int cap)

Method Detail

getElementFactory

back to summary

protected VkViewport getElementFactory()

Implements abstract org.lwjgl.system.StructBuffer.getElementFactory.

Annotations

@Override

height	back to summary
public float height() Returns:float the value of the `VkViewport#height` field.

height	back to summary
public VkViewport.Buffer height(float value) Sets the specified value to the `VkViewport#height` field.

maxDepth	back to summary
public float maxDepth() Returns:float the value of the `VkViewport#maxDepth` field.

maxDepth	back to summary
public VkViewport.Buffer maxDepth(float value) Sets the specified value to the `VkViewport#maxDepth` field.

minDepth	back to summary
public float minDepth() Returns:float the value of the `VkViewport#minDepth` field.

minDepth	back to summary
public VkViewport.Buffer minDepth(float value) Sets the specified value to the `VkViewport#minDepth` field.

self

back to summary

protected VkViewport.Buffer self()

Implements abstract org.lwjgl.system.CustomBuffer.self.

Annotations

@Override

width	back to summary
public float width() Returns:float the value of the `VkViewport#width` field.

width	back to summary
public VkViewport.Buffer width(float value) Sets the specified value to the `VkViewport#width` field.

x	back to summary
public float x() Returns:float the value of the `VkViewport#x` field.

x	back to summary
public VkViewport.Buffer x(float value) Sets the specified value to the `VkViewport#x` field.

y	back to summary
public float y() Returns:float the value of the `VkViewport#y` field.

y	back to summary
public VkViewport.Buffer y(float value) Sets the specified value to the `VkViewport#y` field.

public Class VkViewport

Description

Note

Valid Usage

See Also

Layout

Nested and Inner Type Summary

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail

public Class VkViewport.Buffer

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail