JavaFX 25 · com.sun.javafx.geom.Arc2D · APIdia, the JavaDoc alternative

Modifier and Type	Field and Description
public static final int	CHORD The closure type for an arc closed by drawing a straight line segment from the start of the arc segment to the end of the arc segment.
public float	extent The angular extent of the arc in degrees.
public float	height The overall height of the full ellipse of which this arc is a partial section (not considering the angular extents).
public static final int	OPEN The closure type for an open arc with no path segments connecting the two ends of the arc segment.
public static final int	PIE The closure type for an arc closed by drawing straight line segments from the start of the arc segment to the center of the full ellipse and from that point to the end of the arc segment.
public float	start The starting angle of the arc in degrees.
private int	type
public float	width The overall width of the full ellipse of which this arc is a partial section (not considering the angular extents).
public float	x The X coordinate of the upper-left corner of the framing rectangle of the arc.
public float	y The Y coordinate of the upper-left corner of the framing rectangle of the arc.

Access	Constructor and Description
public	Arc2D() Constructs a new OPEN arc, initialized to location (0, 0), size (0, 0), angular extents (start = 0, extent = 0).
public	Arc2D(int The closure type for the arc: `OPEN`, `CHORD`, or `PIE`. type) Constructs a new arc, initialized to location (0, 0), size (0, 0), angular extents (start = 0, extent = 0), and the specified closure type.
public	Arc2D(float The X coordinate of the upper-left corner of the arc's framing rectangle. x, float The Y coordinate of the upper-left corner of the arc's framing rectangle. y, float The overall width of the full ellipse of which this arc is a partial section. w, float The overall height of the full ellipse of which this arc is a partial section. h, float The starting angle of the arc in degrees. start, float The angular extent of the arc in degrees. extent, int The closure type for the arc: `OPEN`, `CHORD`, or `PIE`. type) Constructs a new arc, initialized to the specified location, size, angular extents, and closure type.

Method Summary

Modifier and Type	Method and Description
public boolean	Returns: `true` if the point lies within the bound of the arc, `false` if the point lies outside of the arc's bounds. contains(float The X coordinate of the point to test. x, float The Y coordinate of the point to test. y) Implements abstract com.sun.javafx.geom.Shape.contains. Determines whether or not the specified point is inside the boundary of the arc.
public boolean	Returns: `true` if the arc contains the rectangle, `false` if the arc doesn't contain the rectangle. contains(float The X coordinate of the rectangle's upper-left corner. x, float The Y coordinate of the rectangle's upper-left corner. y, float The width of the rectangle. w, float The height of the rectangle. h) Implements abstract com.sun.javafx.geom.Shape.contains. Determines whether or not the interior of the arc entirely contains the specified rectangle.
public boolean	Returns: `true` if the arc contains the angle, `false` if the arc doesn't contain the angle. containsAngle(float The angle to test. angle) Determines whether or not the specified angle is within the angular extents of the arc.
public Arc2D	copy() Implements abstract com.sun.javafx.geom.Shape.copy. Returns a new copy of this `Shape` instance.
public boolean	Returns: `true` if `obj` is an instance of `Arc2D` and has the same values; `false` otherwise. equals(Object an `Object` to be compared with this `Arc2D`. obj) Overrides java.lang.Object.equals. Determines whether or not the specified `Object` is equal to this `Arc2D`.
public int	Returns: One of the integer constant closure types defined in this class. getArcType() Returns the arc closure type of the arc: `OPEN`, `CHORD`, or `PIE`.
public RectBounds	Returns: the `RectBounds` that represents the arc's framing rectangle. getBounds() Overrides com.sun.javafx.geom.RectangularShape.getBounds. Returns the high-precision framing rectangle of the arc.
public Point2D	Returns: A `Point2D` object representing the x,y coordinates of the ending point of the arc. getEndPoint() Returns the ending point of the arc.
public float	getHeight() Implements abstract com.sun.javafx.geom.RectangularShape.getHeight. Returns the height of the framing rectangle in `double` precision.
public PathIterator	Returns: A `PathIterator` that defines the arc's boundary. getPathIterator(BaseTransform an optional `BaseTransform` to be applied to the coordinates as they are returned in the iteration, or null if the untransformed coordinates are desired. tx) Implements abstract com.sun.javafx.geom.Shape.getPathIterator. Returns an iteration object that defines the boundary of the arc.
public Point2D	Returns: A `Point2D` object representing the x,y coordinates of the starting point of the arc. getStartPoint() Returns the starting point of the arc.
public float	getWidth() Implements abstract com.sun.javafx.geom.RectangularShape.getWidth. Returns the width of the framing rectangle in `double` precision.
public float	getX() Implements abstract com.sun.javafx.geom.RectangularShape.getX. Returns the X coordinate of the upper-left corner of the framing rectangle in `double` precision.
public float	getY() Implements abstract com.sun.javafx.geom.RectangularShape.getY. Returns the Y coordinate of the upper-left corner of the framing rectangle in `double` precision.
public int	Returns: the hashcode for this `Arc2D`. hashCode() Overrides java.lang.Object.hashCode. Returns the hashcode for this `Arc2D`.
public boolean	Returns: `true` if the arc intersects the rectangle, `false` if the arc doesn't intersect the rectangle. intersects(float The X coordinate of the rectangle's upper-left corner. x, float The Y coordinate of the rectangle's upper-left corner. y, float The width of the rectangle. w, float The height of the rectangle. h) Implements abstract com.sun.javafx.geom.Shape.intersects. Determines whether or not the interior of the arc intersects the interior of the specified rectangle.
public boolean	isEmpty() Implements abstract com.sun.javafx.geom.RectangularShape.isEmpty. Determines whether the `RectangularShape` is empty.
pack-priv static float	normalizeDegrees(double angle)
public void	setAngles(float The X coordinate of the arc's starting point. x1, float The Y coordinate of the arc's starting point. y1, float The X coordinate of the arc's ending point. x2, float The Y coordinate of the arc's ending point. y2) Sets the starting angle and angular extent of this arc using two sets of coordinates.
public void	setAngles(Point2D The `Point2D` that defines the arc's starting point. p1, Point2D The `Point2D` that defines the arc's ending point. p2) Sets the starting angle and angular extent of this arc using two points.
public void	setAngleStart(Point2D The `Point2D` that defines the starting angle. p) Sets the starting angle of this arc to the angle that the specified point defines relative to the center of this arc.
public void	setArc(float x, float y, float w, float h, float angSt, float angExt, int closure)
public void	setArc(Point2D The `Point2D` representing the coordinates of the upper-left corner of the arc. loc, Dimension2D The `Dimension2D` representing the width and height of the full ellipse of which this arc is a partial section. size, float The starting angle of the arc in degrees. angSt, float The angular extent of the arc in degrees. angExt, int The closure type for the arc: `OPEN`, `CHORD`, or `PIE`. closure) Sets the location, size, angular extents, and closure type of this arc to the specified values.
public void	setArc(Arc2D The `Arc2D` to use to set the arc's values. a) Sets this arc to be the same as the specified arc.
public void	setArcByCenter(float The X coordinate of the center of the arc. x, float The Y coordinate of the center of the arc. y, float The radius of the arc. radius, float The starting angle of the arc in degrees. angSt, float The angular extent of the arc in degrees. angExt, int The closure type for the arc: `OPEN`, `CHORD`, or `PIE`. closure) Sets the position, bounds, angular extents, and closure type of this arc to the specified values.
public void	setArcByTangent(Point2D The first point that defines the arc. The starting angle of the arc is tangent to the line specified by points (p1, p2). p1, Point2D The second point that defines the arc. The starting angle of the arc is tangent to the line specified by points (p1, p2). The ending angle of the arc is tangent to the line specified by points (p2, p3). p2, Point2D The third point that defines the arc. The ending angle of the arc is tangent to the line specified by points (p2, p3). p3, float The radius of the arc. radius) Sets the position, bounds, and angular extents of this arc to the specified value.
public void	setArcType(int The integer constant that represents the closure type of this arc: `OPEN`, `CHORD`, or `PIE`. type) Sets the closure type of this arc to the specified value: `OPEN`, `CHORD`, or `PIE`.
public void	setFrame(float x, float y, float w, float h) Implements abstract com.sun.javafx.geom.RectangularShape.setFrame. Sets the location and size of the framing rectangle of this `Shape` to the specified rectangular values.

Inherited from com.sun.javafx.geom.RectangularShape:: contains getCenterX getCenterY getMaxX getMaxY getMinX getMinY getPathIterator setFrame setFrameFromCenter setFrameFromCenter setFrameFromDiagonal setFrameFromDiagonal toString

CHORD	back to summary
public static final int CHORD The closure type for an arc closed by drawing a straight line segment from the start of the arc segment to the end of the arc segment.

extent	back to summary
public float extent The angular extent of the arc in degrees.

height	back to summary
public float height The overall height of the full ellipse of which this arc is a partial section (not considering the angular extents).

OPEN	back to summary
public static final int OPEN The closure type for an open arc with no path segments connecting the two ends of the arc segment.

PIE	back to summary
public static final int PIE The closure type for an arc closed by drawing straight line segments from the start of the arc segment to the center of the full ellipse and from that point to the end of the arc segment.

start	back to summary
public float start The starting angle of the arc in degrees.

type	back to summary
private int type

width	back to summary
public float width The overall width of the full ellipse of which this arc is a partial section (not considering the angular extents).

x	back to summary
public float x The X coordinate of the upper-left corner of the framing rectangle of the arc.

y	back to summary
public float y The Y coordinate of the upper-left corner of the framing rectangle of the arc.

Arc2D	back to summary
public Arc2D() Constructs a new OPEN arc, initialized to location (0, 0), size (0, 0), angular extents (start = 0, extent = 0).

Arc2D	back to summary
public Arc2D(int type) Constructs a new arc, initialized to location (0, 0), size (0, 0), angular extents (start = 0, extent = 0), and the specified closure type. Parameters type:int The closure type for the arc: `OPEN`, `CHORD`, or `PIE`.

Arc2D	back to summary
public Arc2D(float x, float y, float w, float h, float start, float extent, int type) Constructs a new arc, initialized to the specified location, size, angular extents, and closure type. Parameters x:float The X coordinate of the upper-left corner of the arc's framing rectangle. y:float The Y coordinate of the upper-left corner of the arc's framing rectangle. w:float The overall width of the full ellipse of which this arc is a partial section. h:float The overall height of the full ellipse of which this arc is a partial section. start:float The starting angle of the arc in degrees. extent:float The angular extent of the arc in degrees. type:int The closure type for the arc: `OPEN`, `CHORD`, or `PIE`.

Method Detail

contains back to summary

contains	back to summary
public boolean contains(float x, float y) Implements abstract com.sun.javafx.geom.Shape.contains. Determines whether or not the specified point is inside the boundary of the arc. Parameters x:float The X coordinate of the point to test. y:float The Y coordinate of the point to test. Returns:boolean `true` if the point lies within the bound of the arc, `false` if the point lies outside of the arc's bounds. Annotations @Override

public boolean contains(float x, float y)

Implements abstract com.sun.javafx.geom.Shape.contains.

Determines whether or not the specified point is inside the boundary of the arc.

Parameters

x:float: The X coordinate of the point to test.
y:float: The Y coordinate of the point to test.

Returns:boolean

true if the point lies within the bound of the arc, false if the point lies outside of the arc's bounds.

Annotations

@Override

contains back to summary

contains	back to summary
public boolean contains(float x, float y, float w, float h) Implements abstract com.sun.javafx.geom.Shape.contains. Determines whether or not the interior of the arc entirely contains the specified rectangle. Parameters x:float The X coordinate of the rectangle's upper-left corner. y:float The Y coordinate of the rectangle's upper-left corner. w:float The width of the rectangle. h:float The height of the rectangle. Returns:boolean `true` if the arc contains the rectangle, `false` if the arc doesn't contain the rectangle. Annotations @Override

public boolean contains(float x, float y, float w, float h)

Implements abstract com.sun.javafx.geom.Shape.contains.

Determines whether or not the interior of the arc entirely contains the specified rectangle.

Parameters

x:float: The X coordinate of the rectangle's upper-left corner.
y:float: The Y coordinate of the rectangle's upper-left corner.
w:float: The width of the rectangle.
h:float: The height of the rectangle.

Returns:boolean

true if the arc contains the rectangle, false if the arc doesn't contain the rectangle.

Annotations

@Override

containsAngle back to summary

containsAngle	back to summary
public boolean containsAngle(float angle) Determines whether or not the specified angle is within the angular extents of the arc. Parameters angle:float The angle to test. Returns:boolean `true` if the arc contains the angle, `false` if the arc doesn't contain the angle.

public boolean containsAngle(float angle)

Determines whether or not the specified angle is within the angular extents of the arc.

Parameters

angle:float: The angle to test.

Returns:boolean

true if the arc contains the angle, false if the arc doesn't contain the angle.

copy back to summary

copy	back to summary
public Arc2D copy() Implements abstract com.sun.javafx.geom.Shape.copy. Doc from com.sun.javafx.geom.Shape.copy. Returns a new copy of this `Shape` instance. Annotations @Override

public Arc2D copy()

Implements abstract com.sun.javafx.geom.Shape.copy.

Doc from com.sun.javafx.geom.Shape.copy.

Returns a new copy of this Shape instance.

Annotations

@Override

equals back to summary

equals	back to summary
public boolean equals(Object obj) Overrides java.lang.Object.equals. Determines whether or not the specified `Object` is equal to this `Arc2D`. The specified `Object` is equal to this `Arc2D` if it is an instance of `Arc2D` and if its location, size, arc extents and type are the same as this `Arc2D`. Parameters obj:Object an `Object` to be compared with this `Arc2D`. Returns:boolean `true` if `obj` is an instance of `Arc2D` and has the same values; `false` otherwise. Annotations @Override

public boolean equals(Object obj)

Overrides java.lang.Object.equals.

Determines whether or not the specified Object is equal to this Arc2D. The specified Object is equal to this Arc2D if it is an instance of Arc2D and if its location, size, arc extents and type are the same as this Arc2D.

Parameters

obj:Object: an Object to be compared with this Arc2D.

Returns:boolean

true if obj is an instance of Arc2D and has the same values; false otherwise.

Annotations

@Override

getArcType back to summary

getArcType	back to summary
public int getArcType() Returns the arc closure type of the arc: `OPEN`, `CHORD`, or `PIE`. Returns:int One of the integer constant closure types defined in this class. See Also `setArcType`

public int getArcType()

Returns the arc closure type of the arc: OPEN, CHORD, or PIE.

Returns:int: One of the integer constant closure types defined in this class.
See Also: setArcType

getBounds back to summary

getBounds	back to summary
public RectBounds getBounds() Overrides com.sun.javafx.geom.RectangularShape.getBounds. Returns the high-precision framing rectangle of the arc. The framing rectangle contains only the part of this `Arc2D` that is in between the starting and ending angles and contains the pie wedge, if this `Arc2D` has a `PIE` closure type. This method differs from the `getBounds` in that the `getBounds` method only returns the bounds of the enclosing ellipse of this `Arc2D` without considering the starting and ending angles of this `Arc2D`. Returns:RectBounds the `RectBounds` that represents the arc's framing rectangle. Annotations @Override

public RectBounds getBounds()

Overrides com.sun.javafx.geom.RectangularShape.getBounds.

Returns the high-precision framing rectangle of the arc. The framing rectangle contains only the part of this Arc2D that is in between the starting and ending angles and contains the pie wedge, if this Arc2D has a PIE closure type.

This method differs from the getBounds in that the getBounds method only returns the bounds of the enclosing ellipse of this Arc2D without considering the starting and ending angles of this Arc2D.

Returns:RectBounds

the RectBounds that represents the arc's framing rectangle.

Annotations

@Override

getEndPoint back to summary

getEndPoint	back to summary
public Point2D getEndPoint() Returns the ending point of the arc. This point is the intersection of the ray from the center defined by the starting angle plus the angular extent of the arc and the elliptical boundary of the arc. Returns:Point2D A `Point2D` object representing the x,y coordinates of the ending point of the arc.

public Point2D getEndPoint()

Returns the ending point of the arc. This point is the intersection of the ray from the center defined by the starting angle plus the angular extent of the arc and the elliptical boundary of the arc.

Returns:Point2D: A Point2D object representing the x,y coordinates of the ending point of the arc.

getHeight back to summary

getHeight	back to summary
public float getHeight() Implements abstract com.sun.javafx.geom.RectangularShape.getHeight. Doc from com.sun.javafx.geom.RectangularShape.getHeight. Returns the height of the framing rectangle in `double` precision. Annotations @Override

public float getHeight()

Implements abstract com.sun.javafx.geom.RectangularShape.getHeight.

Doc from com.sun.javafx.geom.RectangularShape.getHeight.

Returns the height of the framing rectangle in double precision.

Annotations

@Override

getPathIterator back to summary

getPathIterator	back to summary
public PathIterator getPathIterator(BaseTransform tx) Implements abstract com.sun.javafx.geom.Shape.getPathIterator. Returns an iteration object that defines the boundary of the arc. This iterator is multithread safe. `Arc2D` guarantees that modifications to the geometry of the arc do not affect any iterations of that geometry that are already in process. Parameters tx:BaseTransform an optional `BaseTransform` to be applied to the coordinates as they are returned in the iteration, or null if the untransformed coordinates are desired. Returns:PathIterator A `PathIterator` that defines the arc's boundary. Annotations @Override

public PathIterator getPathIterator(BaseTransform tx)

Implements abstract com.sun.javafx.geom.Shape.getPathIterator.

Returns an iteration object that defines the boundary of the arc. This iterator is multithread safe. Arc2D guarantees that modifications to the geometry of the arc do not affect any iterations of that geometry that are already in process.

Parameters

tx:BaseTransform: an optional BaseTransform to be applied to the coordinates as they are returned in the iteration, or null if the untransformed coordinates are desired.

Returns:PathIterator

A PathIterator that defines the arc's boundary.

Annotations

@Override

getStartPoint back to summary

getStartPoint	back to summary
public Point2D getStartPoint() Returns the starting point of the arc. This point is the intersection of the ray from the center defined by the starting angle and the elliptical boundary of the arc. Returns:Point2D A `Point2D` object representing the x,y coordinates of the starting point of the arc.

public Point2D getStartPoint()

Returns the starting point of the arc. This point is the intersection of the ray from the center defined by the starting angle and the elliptical boundary of the arc.

Returns:Point2D: A Point2D object representing the x,y coordinates of the starting point of the arc.

getWidth back to summary

getWidth	back to summary
public float getWidth() Implements abstract com.sun.javafx.geom.RectangularShape.getWidth. Doc from com.sun.javafx.geom.RectangularShape.getWidth. Returns the width of the framing rectangle in `double` precision. Annotations @Override

public float getWidth()

Implements abstract com.sun.javafx.geom.RectangularShape.getWidth.

Doc from com.sun.javafx.geom.RectangularShape.getWidth.

Returns the width of the framing rectangle in double precision.

Annotations

@Override

getX back to summary

getX	back to summary
public float getX() Implements abstract com.sun.javafx.geom.RectangularShape.getX. Doc from com.sun.javafx.geom.RectangularShape.getX. Returns the X coordinate of the upper-left corner of the framing rectangle in `double` precision. Annotations @Override

public float getX()

Implements abstract com.sun.javafx.geom.RectangularShape.getX.

Doc from com.sun.javafx.geom.RectangularShape.getX.

Returns the X coordinate of the upper-left corner of the framing rectangle in double precision.

Annotations

@Override

getY back to summary

getY	back to summary
public float getY() Implements abstract com.sun.javafx.geom.RectangularShape.getY. Doc from com.sun.javafx.geom.RectangularShape.getY. Returns the Y coordinate of the upper-left corner of the framing rectangle in `double` precision. Annotations @Override

public float getY()

Implements abstract com.sun.javafx.geom.RectangularShape.getY.

Doc from com.sun.javafx.geom.RectangularShape.getY.

Returns the Y coordinate of the upper-left corner of the framing rectangle in double precision.

Annotations

@Override

hashCode back to summary

hashCode	back to summary
public int hashCode() Overrides java.lang.Object.hashCode. Returns the hashcode for this `Arc2D`. Returns:int the hashcode for this `Arc2D`. Annotations @Override

public int hashCode()

Overrides java.lang.Object.hashCode.

Returns the hashcode for this Arc2D.

Returns:int

the hashcode for this Arc2D.

Annotations

@Override

intersects back to summary

intersects	back to summary
public boolean intersects(float x, float y, float w, float h) Implements abstract com.sun.javafx.geom.Shape.intersects. Determines whether or not the interior of the arc intersects the interior of the specified rectangle. Parameters x:float The X coordinate of the rectangle's upper-left corner. y:float The Y coordinate of the rectangle's upper-left corner. w:float The width of the rectangle. h:float The height of the rectangle. Returns:boolean `true` if the arc intersects the rectangle, `false` if the arc doesn't intersect the rectangle. Annotations @Override

public boolean intersects(float x, float y, float w, float h)

Implements abstract com.sun.javafx.geom.Shape.intersects.

Determines whether or not the interior of the arc intersects the interior of the specified rectangle.

Parameters

x:float: The X coordinate of the rectangle's upper-left corner.
y:float: The Y coordinate of the rectangle's upper-left corner.
w:float: The width of the rectangle.
h:float: The height of the rectangle.

Returns:boolean

true if the arc intersects the rectangle, false if the arc doesn't intersect the rectangle.

Annotations

@Override

isEmpty back to summary

isEmpty	back to summary
public boolean isEmpty() Implements abstract com.sun.javafx.geom.RectangularShape.isEmpty. Doc from com.sun.javafx.geom.RectangularShape.isEmpty. Determines whether the `RectangularShape` is empty. When the `RectangularShape` is empty, it encloses no area. Annotations @Override

public boolean isEmpty()

Implements abstract com.sun.javafx.geom.RectangularShape.isEmpty.

Doc from com.sun.javafx.geom.RectangularShape.isEmpty.

Determines whether the RectangularShape is empty. When the RectangularShape is empty, it encloses no area.

Annotations

@Override

normalizeDegrees	back to summary
pack-priv static float normalizeDegrees(double angle)

setAngles	back to summary
public void setAngles(float x1, float y1, float x2, float y2) Sets the starting angle and angular extent of this arc using two sets of coordinates. The first set of coordinates is used to determine the angle of the starting point relative to the arc's center. The second set of coordinates is used to determine the angle of the end point relative to the arc's center. The arc will always be non-empty and extend counterclockwise from the first point around to the second point. Parameters x1:float The X coordinate of the arc's starting point. y1:float The Y coordinate of the arc's starting point. x2:float The X coordinate of the arc's ending point. y2:float The Y coordinate of the arc's ending point.

setAngles

back to summary

public void setAngles(float x1, float y1, float x2, float y2)

Sets the starting angle and angular extent of this arc using two sets of coordinates. The first set of coordinates is used to determine the angle of the starting point relative to the arc's center. The second set of coordinates is used to determine the angle of the end point relative to the arc's center. The arc will always be non-empty and extend counterclockwise from the first point around to the second point.

Parameters

x1:float: The X coordinate of the arc's starting point.
y1:float: The Y coordinate of the arc's starting point.
x2:float: The X coordinate of the arc's ending point.
y2:float: The Y coordinate of the arc's ending point.

setAngles back to summary

setAngles	back to summary
public void setAngles(Point2D p1, Point2D p2) Sets the starting angle and angular extent of this arc using two points. The first point is used to determine the angle of the starting point relative to the arc's center. The second point is used to determine the angle of the end point relative to the arc's center. The arc will always be non-empty and extend counterclockwise from the first point around to the second point. Parameters p1:Point2D The `Point2D` that defines the arc's starting point. p2:Point2D The `Point2D` that defines the arc's ending point.

public void setAngles(Point2D p1, Point2D p2)

Sets the starting angle and angular extent of this arc using two points. The first point is used to determine the angle of the starting point relative to the arc's center. The second point is used to determine the angle of the end point relative to the arc's center. The arc will always be non-empty and extend counterclockwise from the first point around to the second point.

Parameters

p1:Point2D: The Point2D that defines the arc's starting point.
p2:Point2D: The Point2D that defines the arc's ending point.

setAngleStart back to summary

setAngleStart	back to summary
public void setAngleStart(Point2D p) Sets the starting angle of this arc to the angle that the specified point defines relative to the center of this arc. The angular extent of the arc will remain the same. Parameters p:Point2D The `Point2D` that defines the starting angle. See Also `start`

public void setAngleStart(Point2D p)

Sets the starting angle of this arc to the angle that the specified point defines relative to the center of this arc. The angular extent of the arc will remain the same.

Parameters

p:Point2D: The Point2D that defines the starting angle.

See Also

start

setArc	back to summary
public void setArc(float x, float y, float w, float h, float angSt, float angExt, int closure)

setArc back to summary

setArc	back to summary
public void setArc(Point2D loc, Dimension2D size, float angSt, float angExt, int closure) Sets the location, size, angular extents, and closure type of this arc to the specified values. Parameters loc:Point2D The `Point2D` representing the coordinates of the upper-left corner of the arc. size:Dimension2D The `Dimension2D` representing the width and height of the full ellipse of which this arc is a partial section. angSt:float The starting angle of the arc in degrees. angExt:float The angular extent of the arc in degrees. closure:int The closure type for the arc: `OPEN`, `CHORD`, or `PIE`.

public void setArc(Point2D loc, Dimension2D size, float angSt, float angExt, int closure)

Sets the location, size, angular extents, and closure type of this arc to the specified values.

Parameters

loc:Point2D: The Point2D representing the coordinates of the upper-left corner of the arc.
size:Dimension2D: The Dimension2D representing the width and height of the full ellipse of which this arc is a partial section.
angSt:float: The starting angle of the arc in degrees.
angExt:float: The angular extent of the arc in degrees.
closure:int: The closure type for the arc: OPEN, CHORD, or PIE.

setArc back to summary

setArc	back to summary
public void setArc(Arc2D a) Sets this arc to be the same as the specified arc. Parameters a:Arc2D The `Arc2D` to use to set the arc's values.

public void setArc(Arc2D a)

Sets this arc to be the same as the specified arc.

Parameters

a:Arc2D: The Arc2D to use to set the arc's values.

setArcByCenter back to summary

setArcByCenter	back to summary
public void setArcByCenter(float x, float y, float radius, float angSt, float angExt, int closure) Sets the position, bounds, angular extents, and closure type of this arc to the specified values. The arc is defined by a center point and a radius rather than a framing rectangle for the full ellipse. Parameters x:float The X coordinate of the center of the arc. y:float The Y coordinate of the center of the arc. radius:float The radius of the arc. angSt:float The starting angle of the arc in degrees. angExt:float The angular extent of the arc in degrees. closure:int The closure type for the arc: `OPEN`, `CHORD`, or `PIE`.

public void setArcByCenter(float x, float y, float radius, float angSt, float angExt, int closure)

Sets the position, bounds, angular extents, and closure type of this arc to the specified values. The arc is defined by a center point and a radius rather than a framing rectangle for the full ellipse.

Parameters

x:float: The X coordinate of the center of the arc.
y:float: The Y coordinate of the center of the arc.
radius:float: The radius of the arc.
angSt:float: The starting angle of the arc in degrees.
angExt:float: The angular extent of the arc in degrees.
closure:int: The closure type for the arc: OPEN, CHORD, or PIE.

setArcByTangent	back to summary
public void setArcByTangent(Point2D p1, Point2D p2, Point2D p3, float radius) Sets the position, bounds, and angular extents of this arc to the specified value. The starting angle of the arc is tangent to the line specified by points (p1, p2), the ending angle is tangent to the line specified by points (p2, p3), and the arc has the specified radius. Parameters p1:Point2D The first point that defines the arc. The starting angle of the arc is tangent to the line specified by points (p1, p2). p2:Point2D The second point that defines the arc. The starting angle of the arc is tangent to the line specified by points (p1, p2). The ending angle of the arc is tangent to the line specified by points (p2, p3). p3:Point2D The third point that defines the arc. The ending angle of the arc is tangent to the line specified by points (p2, p3). radius:float The radius of the arc.

setArcByTangent

back to summary

public void setArcByTangent(Point2D p1, Point2D p2, Point2D p3, float radius)

Sets the position, bounds, and angular extents of this arc to the specified value. The starting angle of the arc is tangent to the line specified by points (p1, p2), the ending angle is tangent to the line specified by points (p2, p3), and the arc has the specified radius.

Parameters

p1:Point2D: The first point that defines the arc. The starting angle of the arc is tangent to the line specified by points (p1, p2).
p2:Point2D: The second point that defines the arc. The starting angle of the arc is tangent to the line specified by points (p1, p2). The ending angle of the arc is tangent to the line specified by points (p2, p3).
p3:Point2D: The third point that defines the arc. The ending angle of the arc is tangent to the line specified by points (p2, p3).
radius:float: The radius of the arc.

setArcType back to summary

setArcType	back to summary
public void setArcType(int type) Sets the closure type of this arc to the specified value: `OPEN`, `CHORD`, or `PIE`. Parameters type:int The integer constant that represents the closure type of this arc: `OPEN`, `CHORD`, or `PIE`. Exceptions IllegalArgumentException: if `type` is not 0, 1, or 2.+ See Also `getArcType`

public void setArcType(int type)

Sets the closure type of this arc to the specified value: OPEN, CHORD, or PIE.

Parameters

type:int: The integer constant that represents the closure type of this arc: OPEN, CHORD, or PIE.

Exceptions

IllegalArgumentException:: if type is not 0, 1, or 2.+

See Also

getArcType

setFrame back to summary

setFrame	back to summary
public void setFrame(float x, float y, float w, float h) Implements abstract com.sun.javafx.geom.RectangularShape.setFrame. Doc from com.sun.javafx.geom.RectangularShape.setFrame. Sets the location and size of the framing rectangle of this `Shape` to the specified rectangular values. Note that the arc partially inscribes the framing rectangle of this `RectangularShape`. Annotations @Override

public void setFrame(float x, float y, float w, float h)

Implements abstract com.sun.javafx.geom.RectangularShape.setFrame.

Doc from com.sun.javafx.geom.RectangularShape.setFrame.

Sets the location and size of the framing rectangle of this Shape to the specified rectangular values. Note that the arc partially inscribes the framing rectangle of this RectangularShape.

Annotations

@Override

public Class Arc2D

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail