OSGi 8.1.0 · org.osgi.service.zigbee.APSException · APIdia, the JavaDoc alternative

Field Summary

Modifier and Type	Field and Description
public static final int	ASDU_TOO_LONG A transmit request failed since the ASDU is too large and fragmentation is not supported.
public static final int	DEFRAG_DEFERRED A received fragmented frame could not be defragmented at the current time.
public static final int	DEFRAG_UNSUPPORTED A received fragmented frame could not be defragmented since the device does not support fragmentation.
public static final int	ILLEGAL_REQUEST A parameter value was out of range.
public static final int	INVALID_BINDING An APSME-UNBIND.request failed due to the requested binding link not existing in the binding table.
public static final int	INVALID_GROUP An APSME-REMOVE-GROUP.request has been issued with a group identifier that does not appear in the group table.
public static final int	INVALID_PARAMETER A parameter value was invalid or out of range.
public static final int	NO_ACK An APSDE-DATA.request requesting acknowledged transmission failed due to no acknowledgment being received.
public static final int	NO_BOUND_DEVICE An APSDE-DATA.request with a destination addressing mode set to 0x00 failed due to there being no devices bound to this device.
public static final int	NO_SHORT_ADDRESS An APSDE-DATA.request with a destination addressing mode set to 0x03 failed due to no corresponding short address found in the address map table.
public static final int	NOT_SUPPORTED An APSDE-DATA.request with a destination addressing mode set to 0x00 failed due to a binding table not being supported on the device.
public static final int	SECURED_LINK_KEY An ASDU was received that was secured using a link key.
public static final int	SECURED_NWK_KEY An ASDU was received that was secured using a network key.
public static final int	SECURITY_FAIL An APSDE-DATA.request requesting security has resulted in an error during the corresponding security processing.
private static final long	serialVersionUID Hides org.osgi.service.zigbee.ZigBeeException.serialVersionUID.
public static final int	SUCCESS A request has been executed successfully.
public static final int	TABLE_FULL An APSME-BIND.request or APSME.ADDGROUP.
public static final int	UNSECURED An ASDU was received without any security.
public static final int	UNSUPPORTED_ATTRIBUTE An APSME-GET.request or APSMESET.

Inherited from org.osgi.service.zigbee.ZigBeeException:: errorCode OSGI_EXISTING_ID OSGI_MULTIPLE_HOSTS TIMEOUT UNKNOWN_ERROR zigBeeErrorCode

Constructor Summary

Access	Constructor and Description
public	APSException(String exception an error description. errorDesc) Creates a APSException containing only a description, but no error codes.
public	APSException(int One of the error codes defined in this interface or `UNKNOWN_ERROR` if the actual error is not listed in this interface. In this case if the native ZigBee error code is known, it is preferred to use the `APSException(int, int, String)` constructor, passing `UNKNOWN_ERROR` as first parameter and the native ZigBee error as the second. errorCode, String An error description which explain the type of problem. errorDesc) Creates a APSException containing a specific `errorCode`.
public	APSException(int One of the error codes defined in this interface or `UNKNOWN_ERROR` the actual error is not covered in this interface. In this case the `zigBeeErrorCode` parameter must be the actual status code returned by the ZigBee stack. errorCode, int The actual APS status code or `UNKNOWN_ERROR` if this status is unknown. zigBeeErrorCode, String An error description which explain the type of problem. errorDesc) Creates a APSException containing a specific `errorCode` or `zigBeeErrorCode`.

Method Summary

Inherited from org.osgi.service.zigbee.ZigBeeException:: getErrorCode getZigBeeErrorCode hasZigBeeErrorCode

Field Detail

ASDU_TOO_LONG	back to summary
public static final int ASDU_TOO_LONG A transmit request failed since the ASDU is too large and fragmentation is not supported.

DEFRAG_DEFERRED	back to summary
public static final int DEFRAG_DEFERRED A received fragmented frame could not be defragmented at the current time.

DEFRAG_UNSUPPORTED	back to summary
public static final int DEFRAG_UNSUPPORTED A received fragmented frame could not be defragmented since the device does not support fragmentation.

ILLEGAL_REQUEST	back to summary
public static final int ILLEGAL_REQUEST A parameter value was out of range.

INVALID_BINDING	back to summary
public static final int INVALID_BINDING An APSME-UNBIND.request failed due to the requested binding link not existing in the binding table.

INVALID_GROUP	back to summary
public static final int INVALID_GROUP An APSME-REMOVE-GROUP.request has been issued with a group identifier that does not appear in the group table.

INVALID_PARAMETER	back to summary
public static final int INVALID_PARAMETER A parameter value was invalid or out of range.

NO_ACK	back to summary
public static final int NO_ACK An APSDE-DATA.request requesting acknowledged transmission failed due to no acknowledgment being received.

NO_BOUND_DEVICE	back to summary
public static final int NO_BOUND_DEVICE An APSDE-DATA.request with a destination addressing mode set to 0x00 failed due to there being no devices bound to this device.

NO_SHORT_ADDRESS	back to summary
public static final int NO_SHORT_ADDRESS An APSDE-DATA.request with a destination addressing mode set to 0x03 failed due to no corresponding short address found in the address map table.

NOT_SUPPORTED	back to summary
public static final int NOT_SUPPORTED An APSDE-DATA.request with a destination addressing mode set to 0x00 failed due to a binding table not being supported on the device.

SECURED_LINK_KEY	back to summary
public static final int SECURED_LINK_KEY An ASDU was received that was secured using a link key.

SECURED_NWK_KEY	back to summary
public static final int SECURED_NWK_KEY An ASDU was received that was secured using a network key.

SECURITY_FAIL	back to summary
public static final int SECURITY_FAIL An APSDE-DATA.request requesting security has resulted in an error during the corresponding security processing.

serialVersionUID	back to summary
private static final long serialVersionUID Hides org.osgi.service.zigbee.ZigBeeException.serialVersionUID.

SUCCESS	back to summary
public static final int SUCCESS A request has been executed successfully.

TABLE_FULL	back to summary
public static final int TABLE_FULL An APSME-BIND.request or APSME.ADDGROUP. request issued when the binding or group tables, respectively, were full.

UNSECURED	back to summary
public static final int UNSECURED An ASDU was received without any security.

UNSUPPORTED_ATTRIBUTE	back to summary
public static final int UNSUPPORTED_ATTRIBUTE An APSME-GET.request or APSMESET. request has been issued with an unknown attribute identifier.

Constructor Detail

APSException back to summary

APSException	back to summary
public APSException(String errorDesc) Creates a APSException containing only a description, but no error codes. If issued on this exception the `getErrorCode()` and `getZigBeeErrorCode()` methods return the `UNKNOWN_ERROR` constant. Parameters errorDesc:String exception an error description.

public APSException(String errorDesc)

Creates a APSException containing only a description, but no error codes. If issued on this exception the getErrorCode() and getZigBeeErrorCode() methods return the UNKNOWN_ERROR constant.

Parameters

errorDesc:String: exception an error description.

APSException back to summary

APSException	back to summary
public APSException(int errorCode, String errorDesc) Creates a APSException containing a specific `errorCode`. Using this constructor with `errorCode` set to `UNKNOWN_ERROR` is equivalent to call `APSException(String)`. Parameters errorCode:int One of the error codes defined in this interface or `UNKNOWN_ERROR` if the actual error is not listed in this interface. In this case if the native ZigBee error code is known, it is preferred to use the `APSException(int, int, String)` constructor, passing `UNKNOWN_ERROR` as first parameter and the native ZigBee error as the second. errorDesc:String An error description which explain the type of problem.

public APSException(int errorCode, String errorDesc)

Creates a APSException containing a specific errorCode. Using this constructor with errorCode set to UNKNOWN_ERROR is equivalent to call APSException(String).

Parameters

errorCode:int: One of the error codes defined in this interface or UNKNOWN_ERROR if the actual error is not listed in this interface. In this case if the native ZigBee error code is known, it is preferred to use the APSException(int, int, String) constructor, passing UNKNOWN_ERROR as first parameter and the native ZigBee error as the second.
errorDesc:String: An error description which explain the type of problem.

APSException back to summary

APSException	back to summary
public APSException(int errorCode, int zigBeeErrorCode, String errorDesc) Creates a APSException containing a specific `errorCode` or `zigBeeErrorCode`. Using this constructor with both the `errorCode` and `zigBeeErrorCode` set to `UNKNOWN_ERROR` is equivalent to call `APSException(String)`. Parameters errorCode:int One of the error codes defined in this interface or `UNKNOWN_ERROR` the actual error is not covered in this interface. In this case the `zigBeeErrorCode` parameter must be the actual status code returned by the ZigBee stack. zigBeeErrorCode:int The actual APS status code or `UNKNOWN_ERROR` if this status is unknown. errorDesc:String An error description which explain the type of problem.

public APSException(int errorCode, int zigBeeErrorCode, String errorDesc)

Creates a APSException containing a specific errorCode or zigBeeErrorCode. Using this constructor with both the errorCode and zigBeeErrorCode set to UNKNOWN_ERROR is equivalent to call APSException(String).

Parameters

errorCode:int: One of the error codes defined in this interface or UNKNOWN_ERROR the actual error is not covered in this interface. In this case the zigBeeErrorCode parameter must be the actual status code returned by the ZigBee stack.
zigBeeErrorCode:int: The actual APS status code or UNKNOWN_ERROR if this status is unknown.
errorDesc:String: An error description which explain the type of problem.

public Class APSException

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail