OSGi 8.1.0 · org.osgi.service.zigbee.ZDPException · APIdia, the JavaDoc alternative

Field Summary

Modifier and Type	Field and Description
public static final int	DEVICE_NOT_FOUND The requested device did not exist on a device following a child descriptor request to a parent.
public static final int	INSUFFICIENT_SPACE The device does not have storage space to support the requested operation.
public static final int	INV_REQUESTTYPE The supplied request type was invalid.
public static final int	INVALID_EP The supplied endpoint was equal to 0x00 or between 0xf1 and 0xff.
public static final int	NO_DESCRIPTOR A child descriptor was not available following a discovery request to a parent.
public static final int	NO_ENTRY The unbind request was unsuccessful due to the coordinator or source device not having an entry in its binding table to unbind.
public static final int	NO_MATCH The end device bind request was unsuccessful due to a failure to match any suitable clusters.
public static final int	NOT_ACTIVE The requested endpoint is not described by a simple descriptor.
public static final int	NOT_AUTHORIZED The permissions configuration table on the target indicates that the request is not authorized from this device.
public static final int	NOT_PERMITTED The device is not in the proper state to support the requested operation.
public static final int	NOT_SUPPORTED The requested optional feature is not supported on the target device.
private static final long	serialVersionUID Hides org.osgi.service.zigbee.ZigBeeException.serialVersionUID.
public static final int	SUCCESS The requested operation or transmission was completed successfully.
public static final int	TABLE_FULL The device does not have table space to support the operation.
public static final int	TIMEOUT Hides org.osgi.service.zigbee.ZigBeeException.TIMEOUT. A timeout has occurred with the requested operation.

Inherited from org.osgi.service.zigbee.ZigBeeException:: errorCode OSGI_EXISTING_ID OSGI_MULTIPLE_HOSTS UNKNOWN_ERROR zigBeeErrorCode

Constructor Summary

Access	Constructor and Description
public	ZDPException(String exception error description. errorDesc) Creates a ZDPException containing only a description, but no error codes.
public	ZDPException(int One of the error codes defined in this interface or `UNKNOWN_ERROR` if the actual error is not listed in this interface. In this case if the native ZigBee error code is known, it is preferred to use the `ZDPException(int, int, String)` constructor, passing `UNKNOWN_ERROR` as first parameter and the native ZigBee error as the second. errorCode, String An error description which explain the type of problem. errorDesc) Creates a ZDPException containing a specific `errorCode`.
public	ZDPException(int One of the error codes defined in this interface or `UNKNOWN_ERROR` the actual error is not covered in this interface. In this case the `zigBeeErrorCode` parameter must be the actual status code returned by the ZigBee stack. errorCode, int The actual ZDP status code or `UNKNOWN_ERROR` if this status is unknown. zigBeeErrorCode, String An error description which explain the type of problem. errorDesc) Creates a ZDPException containing a specific `errorCode` or `zigBeeErrorCode`.

Method Summary

Inherited from org.osgi.service.zigbee.ZigBeeException:: getErrorCode getZigBeeErrorCode hasZigBeeErrorCode

Field Detail

DEVICE_NOT_FOUND	back to summary
public static final int DEVICE_NOT_FOUND The requested device did not exist on a device following a child descriptor request to a parent.

INSUFFICIENT_SPACE	back to summary
public static final int INSUFFICIENT_SPACE The device does not have storage space to support the requested operation.

INV_REQUESTTYPE	back to summary
public static final int INV_REQUESTTYPE The supplied request type was invalid.

INVALID_EP	back to summary
public static final int INVALID_EP The supplied endpoint was equal to 0x00 or between 0xf1 and 0xff.

NO_DESCRIPTOR	back to summary
public static final int NO_DESCRIPTOR A child descriptor was not available following a discovery request to a parent.

NO_ENTRY	back to summary
public static final int NO_ENTRY The unbind request was unsuccessful due to the coordinator or source device not having an entry in its binding table to unbind.

NO_MATCH	back to summary
public static final int NO_MATCH The end device bind request was unsuccessful due to a failure to match any suitable clusters.

NOT_ACTIVE	back to summary
public static final int NOT_ACTIVE The requested endpoint is not described by a simple descriptor.

NOT_AUTHORIZED	back to summary
public static final int NOT_AUTHORIZED The permissions configuration table on the target indicates that the request is not authorized from this device.

NOT_PERMITTED	back to summary
public static final int NOT_PERMITTED The device is not in the proper state to support the requested operation.

NOT_SUPPORTED	back to summary
public static final int NOT_SUPPORTED The requested optional feature is not supported on the target device.

serialVersionUID	back to summary
private static final long serialVersionUID Hides org.osgi.service.zigbee.ZigBeeException.serialVersionUID.

SUCCESS	back to summary
public static final int SUCCESS The requested operation or transmission was completed successfully.

TABLE_FULL	back to summary
public static final int TABLE_FULL The device does not have table space to support the operation.

TIMEOUT	back to summary
public static final int TIMEOUT Hides org.osgi.service.zigbee.ZigBeeException.TIMEOUT. A timeout has occurred with the requested operation. Annotations @SuppressWarnings:hiding

TIMEOUT

back to summary

public static final int TIMEOUT

Hides org.osgi.service.zigbee.ZigBeeException.TIMEOUT.

A timeout has occurred with the requested operation.

Annotations

@SuppressWarnings:hiding

Constructor Detail

ZDPException back to summary

ZDPException	back to summary
public ZDPException(String errorDesc) Creates a ZDPException containing only a description, but no error codes. If issued on this exception the `getErrorCode()` and `getZigBeeErrorCode()` methods return the `UNKNOWN_ERROR` constant. Parameters errorDesc:String exception error description.

public ZDPException(String errorDesc)

Creates a ZDPException containing only a description, but no error codes. If issued on this exception the getErrorCode() and getZigBeeErrorCode() methods return the UNKNOWN_ERROR constant.

Parameters

errorDesc:String: exception error description.

ZDPException back to summary

ZDPException	back to summary
public ZDPException(int errorCode, String errorDesc) Creates a ZDPException containing a specific `errorCode`. Using this constructor with `errorCode` set to `UNKNOWN_ERROR` is equivalent to call `ZDPException(String)`. Parameters errorCode:int One of the error codes defined in this interface or `UNKNOWN_ERROR` if the actual error is not listed in this interface. In this case if the native ZigBee error code is known, it is preferred to use the `ZDPException(int, int, String)` constructor, passing `UNKNOWN_ERROR` as first parameter and the native ZigBee error as the second. errorDesc:String An error description which explain the type of problem.

public ZDPException(int errorCode, String errorDesc)

Creates a ZDPException containing a specific errorCode. Using this constructor with errorCode set to UNKNOWN_ERROR is equivalent to call ZDPException(String).

Parameters

errorCode:int: One of the error codes defined in this interface or UNKNOWN_ERROR if the actual error is not listed in this interface. In this case if the native ZigBee error code is known, it is preferred to use the ZDPException(int, int, String) constructor, passing UNKNOWN_ERROR as first parameter and the native ZigBee error as the second.
errorDesc:String: An error description which explain the type of problem.

ZDPException back to summary

ZDPException	back to summary
public ZDPException(int errorCode, int zigBeeErrorCode, String errorDesc) Creates a ZDPException containing a specific `errorCode` or `zigBeeErrorCode`. Using this constructor with both the `errorCode` and `zigBeeErrorCode` set to `UNKNOWN_ERROR` is equivalent to call `ZDPException(String)`. Parameters errorCode:int One of the error codes defined in this interface or `UNKNOWN_ERROR` the actual error is not covered in this interface. In this case the `zigBeeErrorCode` parameter must be the actual status code returned by the ZigBee stack. zigBeeErrorCode:int The actual ZDP status code or `UNKNOWN_ERROR` if this status is unknown. errorDesc:String An error description which explain the type of problem.

public ZDPException(int errorCode, int zigBeeErrorCode, String errorDesc)

Creates a ZDPException containing a specific errorCode or zigBeeErrorCode. Using this constructor with both the errorCode and zigBeeErrorCode set to UNKNOWN_ERROR is equivalent to call ZDPException(String).

Parameters

errorCode:int: One of the error codes defined in this interface or UNKNOWN_ERROR the actual error is not covered in this interface. In this case the zigBeeErrorCode parameter must be the actual status code returned by the ZigBee stack.
zigBeeErrorCode:int: The actual ZDP status code or UNKNOWN_ERROR if this status is unknown.
errorDesc:String: An error description which explain the type of problem.

public Class ZDPException

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail