JBoss Parent POM 1.7.0.Final · org.wildfly.common.archive.ByteBufferInputStream

Modifier and Type	Field and Description
private final ByteBuffer[]	bufs
pack-priv long	mark
private final long	offset
pack-priv long	pos
private final long	size

Access	Constructor and Description
pack-priv	ByteBufferInputStream(final ByteBuffer[] bufs, final long offset, final long size)

Modifier and Type	Method and Description
public int	available() Overrides java.io.InputStream.available. Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected.
public void	close() Overrides java.io.InputStream.close. Implements java.io.Closeable.close. Closes this input stream and releases any system resources associated with the stream.
public void	mark(final int the maximum limit of bytes that can be read before the mark position becomes invalid. readLimit) Overrides java.io.InputStream.mark. Marks the current position in this input stream.
public boolean	markSupported() Overrides java.io.InputStream.markSupported. Tests if this input stream supports the `mark` and `reset` methods.
public int	read() Implements abstract java.io.InputStream.read. Reads the next byte of data from the input stream.
public int	read(final byte[] the buffer into which the data is read. b) Overrides java.io.InputStream.read. Reads some number of bytes from the input stream and stores them into the buffer array `b`.
public int	read(final byte[] the buffer into which the data is read. b, final int the start offset in array `b` at which the data is written. off, final int the maximum number of bytes to read. len) Overrides java.io.InputStream.read. Reads up to `len` bytes of data from the input stream into an array of bytes.
public void	reset() Overrides java.io.InputStream.reset. Repositions this stream to the position at the time the `mark` method was last called on this input stream.
public long	skip(final long the number of bytes to be skipped. n) Overrides java.io.InputStream.skip. Skips over and discards `n` bytes of data from this input stream.

bufs	back to summary
private final ByteBuffer[] bufs

mark	back to summary
pack-priv long mark

offset	back to summary
private final long offset

pos	back to summary
pack-priv long pos

size	back to summary
private final long size

ByteBufferInputStream	back to summary
pack-priv ByteBufferInputStream(final ByteBuffer[] bufs, final long offset, final long size)

Method Detail

available back to summary

available	back to summary
public int available() Overrides java.io.InputStream.available. Doc from java.io.InputStream.available. Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected. The read might be on the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes. Note that while some implementations of `InputStream` will return the total number of bytes in the stream, many will not. It is never correct to use the return value of this method to allocate a buffer intended to hold all data in this stream. A subclass's implementation of this method may choose to throw an `IOException` if this input stream has been closed by invoking the `close()` method. Returns:int an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking or `0` when it reaches the end of the input stream.

public int available()

Overrides java.io.InputStream.available.

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected. The read might be on the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes.

Note that while some implementations of InputStream will return the total number of bytes in the stream, many will not. It is never correct to use the return value of this method to allocate a buffer intended to hold all data in this stream.

A subclass's implementation of this method may choose to throw an IOException if this input stream has been closed by invoking the close() method.

Returns:int: an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking or 0 when it reaches the end of the input stream.

close	back to summary
public void close() Overrides java.io.InputStream.close. Implements java.io.Closeable.close. Doc from java.io.InputStream.close. Closes this input stream and releases any system resources associated with the stream.

back to summary

public void close()

Overrides java.io.InputStream.close.

Implements java.io.Closeable.close.

Doc from java.io.InputStream.close.

Closes this input stream and releases any system resources associated with the stream.

mark back to summary

mark	back to summary
public void mark(final int readLimit) Overrides java.io.InputStream.mark. Doc from java.io.InputStream.mark. Marks the current position in this input stream. A subsequent call to the `reset` method repositions this stream at the last marked position so that subsequent reads re-read the same bytes. The `readlimit` arguments tells this input stream to allow that many bytes to be read before the mark position gets invalidated. The general contract of `mark` is that, if the method `markSupported` returns `true`, the stream somehow remembers all the bytes read after the call to `mark` and stands ready to supply those same bytes again if and whenever the method `reset` is called. However, the stream is not required to remember any data at all if more than `readlimit` bytes are read from the stream before `reset` is called. Marking a closed stream should not have any effect on the stream. Parameters readLimit:int the maximum limit of bytes that can be read before the mark position becomes invalid.

public void mark(final int readLimit)

Overrides java.io.InputStream.mark.

Doc from java.io.InputStream.mark.

Marks the current position in this input stream. A subsequent call to the reset method repositions this stream at the last marked position so that subsequent reads re-read the same bytes.

The readlimit arguments tells this input stream to allow that many bytes to be read before the mark position gets invalidated.

The general contract of mark is that, if the method markSupported returns true, the stream somehow remembers all the bytes read after the call to mark and stands ready to supply those same bytes again if and whenever the method reset is called. However, the stream is not required to remember any data at all if more than readlimit bytes are read from the stream before reset is called.

Marking a closed stream should not have any effect on the stream.

Parameters

readLimit:int: the maximum limit of bytes that can be read before the mark position becomes invalid.

markSupported back to summary

markSupported	back to summary
public boolean markSupported() Overrides java.io.InputStream.markSupported. Doc from java.io.InputStream.markSupported. Tests if this input stream supports the `mark` and `reset` methods. Whether or not `mark` and `reset` are supported is an invariant property of a particular input stream instance. Returns:boolean `true` if this stream instance supports the mark and reset methods; `false` otherwise.

public boolean markSupported()

Overrides java.io.InputStream.markSupported.

Doc from java.io.InputStream.markSupported.

Tests if this input stream supports the mark and reset methods. Whether or not mark and reset are supported is an invariant property of a particular input stream instance.

Returns:boolean: true if this stream instance supports the mark and reset methods; false otherwise.

read back to summary

read	back to summary
public int read() Implements abstract java.io.InputStream.read. Doc from java.io.InputStream.read. Reads the next byte of data from the input stream. The value byte is returned as an `int` in the range `0` to `255`. If no byte is available because the end of the stream has been reached, the value `-1` is returned. This method blocks until input data is available, the end of the stream is detected, or an exception is thrown. Returns:int the next byte of data, or `-1` if the end of the stream is reached.

public int read()

Implements abstract java.io.InputStream.read.

Doc from java.io.InputStream.read.

Reads the next byte of data from the input stream. The value byte is returned as an int in the range 0 to 255. If no byte is available because the end of the stream has been reached, the value -1 is returned. This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

Returns:int: the next byte of data, or -1 if the end of the stream is reached.

read back to summary

read	back to summary
public int read(final byte[] b) Overrides java.io.InputStream.read. Doc from java.io.InputStream.read. Reads some number of bytes from the input stream and stores them into the buffer array `b`. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown. If the length of `b` is zero, then no bytes are read and `0` is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at the end of the file, the value `-1` is returned; otherwise, at least one byte is read and stored into `b`. The first byte read is stored into element `b[0]`, the next one into `b[1]`, and so on. The number of bytes read is, at most, equal to the length of `b`. Let k be the number of bytes actually read; these bytes will be stored in elements `b[0]` through `b[`k`-1]`, leaving elements `b[`k`]` through `b[b.length-1]` unaffected. Parameters b:byte[] the buffer into which the data is read. Returns:int the total number of bytes read into the buffer, or `-1` if there is no more data because the end of the stream has been reached.

public int read(final byte[] b)

Overrides java.io.InputStream.read.

Doc from java.io.InputStream.read.

Reads some number of bytes from the input stream and stores them into the buffer array b. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown.

If the length of b is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at the end of the file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[0], the next one into b[1], and so on. The number of bytes read is, at most, equal to the length of b. Let k be the number of bytes actually read; these bytes will be stored in elements b[0] through b[k-1], leaving elements b[k] through b[b.length-1] unaffected.

Parameters

b:byte[]: the buffer into which the data is read.

Returns:int

the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.

read back to summary

read	back to summary
public int read(final byte[] b, final int off, final int len) Overrides java.io.InputStream.read. Doc from java.io.InputStream.read. Reads up to `len` bytes of data from the input stream into an array of bytes. An attempt is made to read as many as `len` bytes, but a smaller number may be read. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown. If `len` is zero, then no bytes are read and `0` is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value `-1` is returned; otherwise, at least one byte is read and stored into `b`. The first byte read is stored into element `b[off]`, the next one into `b[off+1]`, and so on. The number of bytes read is, at most, equal to `len`. Let k be the number of bytes actually read; these bytes will be stored in elements `b[off]` through `b[off+`k`-1]`, leaving elements `b[off+`k`]` through `b[off+len-1]` unaffected. In every case, elements `b[0]` through `b[off-1]` and elements `b[off+len]` through `b[b.length-1]` are unaffected. Parameters b:byte[] the buffer into which the data is read. off:int the start offset in array `b` at which the data is written. len:int the maximum number of bytes to read. Returns:int the total number of bytes read into the buffer, or `-1` if there is no more data because the end of the stream has been reached.

public int read(final byte[] b, final int off, final int len)

Overrides java.io.InputStream.read.

Doc from java.io.InputStream.read.

Reads up to len bytes of data from the input stream into an array of bytes. An attempt is made to read as many as len bytes, but a smaller number may be read. The number of bytes actually read is returned as an integer.

This method blocks until input data is available, end of file is detected, or an exception is thrown.

If len is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[off], the next one into b[off+1], and so on. The number of bytes read is, at most, equal to len. Let k be the number of bytes actually read; these bytes will be stored in elements b[off] through b[off+k-1], leaving elements b[off+k] through b[off+len-1] unaffected.

In every case, elements b[0] through b[off-1] and elements b[off+len] through b[b.length-1] are unaffected.

Parameters

b:byte[]: the buffer into which the data is read.
off:int: the start offset in array b at which the data is written.
len:int: the maximum number of bytes to read.

Returns:int

the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.

reset back to summary

reset	back to summary
public void reset() Overrides java.io.InputStream.reset. Doc from java.io.InputStream.reset. Repositions this stream to the position at the time the `mark` method was last called on this input stream. The general contract of `reset` is: If the method `markSupported` returns `true`, then: If the method `mark` has not been called since the stream was created, or the number of bytes read from the stream since `mark` was last called is larger than the argument to `mark` at that last call, then an `IOException` might be thrown. If such an `IOException` is not thrown, then the stream is reset to a state such that all the bytes read since the most recent call to `mark` (or since the start of the file, if `mark` has not been called) will be resupplied to subsequent callers of the `read` method, followed by any bytes that otherwise would have been the next input data as of the time of the call to `reset`. If the method `markSupported` returns `false`, then: The call to `reset` may throw an `IOException`. If an `IOException` is not thrown, then the stream is reset to a fixed state that depends on the particular type of the input stream and how it was created. The bytes that will be supplied to subsequent callers of the `read` method depend on the particular type of the input stream.

public void reset()

Overrides java.io.InputStream.reset.

Doc from java.io.InputStream.reset.

Repositions this stream to the position at the time the mark method was last called on this input stream.

The general contract of reset is:

If the method markSupported returns true, then:
- If the method mark has not been called since the stream was created, or the number of bytes read from the stream since mark was last called is larger than the argument to mark at that last call, then an IOException might be thrown.
- If such an IOException is not thrown, then the stream is reset to a state such that all the bytes read since the most recent call to mark (or since the start of the file, if mark has not been called) will be resupplied to subsequent callers of the read method, followed by any bytes that otherwise would have been the next input data as of the time of the call to reset.
If the method markSupported returns false, then:
- The call to reset may throw an IOException.
- If an IOException is not thrown, then the stream is reset to a fixed state that depends on the particular type of the input stream and how it was created. The bytes that will be supplied to subsequent callers of the read method depend on the particular type of the input stream.

skip back to summary

skip	back to summary
public long skip(final long n) Overrides java.io.InputStream.skip. Doc from java.io.InputStream.skip. Skips over and discards `n` bytes of data from this input stream. The `skip` method may, for a variety of reasons, end up skipping over some smaller number of bytes, possibly `0`. This may result from any of a number of conditions; reaching end of file before `n` bytes have been skipped is only one possibility. The actual number of bytes skipped is returned. If `n` is negative, the `skip` method for class `InputStream` always returns 0, and no bytes are skipped. Subclasses may handle the negative value differently. Parameters n:long the number of bytes to be skipped. Returns:long the actual number of bytes skipped which might be zero.

public long skip(final long n)

Overrides java.io.InputStream.skip.

Doc from java.io.InputStream.skip.

Skips over and discards n bytes of data from this input stream. The skip method may, for a variety of reasons, end up skipping over some smaller number of bytes, possibly 0. This may result from any of a number of conditions; reaching end of file before n bytes have been skipped is only one possibility. The actual number of bytes skipped is returned. If n is negative, the skip method for class InputStream always returns 0, and no bytes are skipped. Subclasses may handle the negative value differently.

Parameters

n:long: the number of bytes to be skipped.

Returns:long

the actual number of bytes skipped which might be zero.

pack-priv final Class ByteBufferInputStream

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail