Modifier and Type	Class and Description
private class	ModelByteBufferWavetable.Buffer8PlusInputStream

Modifier and Type	Field and Description
private float	attenuation
private final ModelByteBuffer	buffer
private ModelByteBuffer	buffer8
private AudioFormat	format
private float	loopLength
private float	loopStart
private int	loopType
private float	pitchcorrection

Access	Constructor and Description
public	ModelByteBufferWavetable(ModelByteBuffer buffer)
public	ModelByteBufferWavetable(ModelByteBuffer buffer, float pitchcorrection)
public	ModelByteBufferWavetable(ModelByteBuffer buffer, AudioFormat format)
public	ModelByteBufferWavetable(ModelByteBuffer buffer, AudioFormat format, float pitchcorrection)

Modifier and Type	Method and Description
public ModelByteBuffer	get8BitExtensionBuffer()
public float	getAttenuation() Implements com.sun.media.sound.ModelOscillator.getAttenuation. Attenuation is in cB.
public ModelByteBuffer	getBuffer()
public int	getChannels() Implements com.sun.media.sound.ModelOscillator.getChannels.
public AudioFormat	getFormat()
public float	getLoopLength() Implements com.sun.media.sound.ModelWavetable.getLoopLength.
public float	getLoopStart() Implements com.sun.media.sound.ModelWavetable.getLoopStart.
public int	getLoopType() Implements com.sun.media.sound.ModelWavetable.getLoopType.
public float	getPitchcorrection() Implements com.sun.media.sound.ModelWavetable.getPitchcorrection.
public ModelOscillatorStream	open(float samplerate) Implements com.sun.media.sound.ModelOscillator.open.
public AudioFloatInputStream	openStream() Implements com.sun.media.sound.ModelWavetable.openStream.
public void	set8BitExtensionBuffer(ModelByteBuffer buffer)
public void	setAttenuation(float attenuation)
public void	setLoopLength(float loopLength)
public void	setLoopStart(float loopStart)
public void	setLoopType(int loopType)
public void	setPitchcorrection(float pitchcorrection)

attenuation	back to summary
private float attenuation

buffer	back to summary
private final ModelByteBuffer buffer

buffer8	back to summary
private ModelByteBuffer buffer8

format	back to summary
private AudioFormat format

loopLength	back to summary
private float loopLength

loopStart	back to summary
private float loopStart

loopType	back to summary
private int loopType

pitchcorrection	back to summary
private float pitchcorrection

ModelByteBufferWavetable	back to summary
public ModelByteBufferWavetable(ModelByteBuffer buffer)

ModelByteBufferWavetable	back to summary
public ModelByteBufferWavetable(ModelByteBuffer buffer, float pitchcorrection)

ModelByteBufferWavetable	back to summary
public ModelByteBufferWavetable(ModelByteBuffer buffer, AudioFormat format)

ModelByteBufferWavetable	back to summary
public ModelByteBufferWavetable(ModelByteBuffer buffer, AudioFormat format, float pitchcorrection)

get8BitExtensionBuffer	back to summary
public ModelByteBuffer get8BitExtensionBuffer()

getAttenuation	back to summary
public float getAttenuation() Implements com.sun.media.sound.ModelOscillator.getAttenuation. Doc from com.sun.media.sound.ModelOscillator.getAttenuation. Attenuation is in cB. Annotations @Override

getBuffer	back to summary
public ModelByteBuffer getBuffer()

getChannels	back to summary
public int getChannels() Implements com.sun.media.sound.ModelOscillator.getChannels. Annotations @Override

getFormat	back to summary
public AudioFormat getFormat()

getLoopLength	back to summary
public float getLoopLength() Implements com.sun.media.sound.ModelWavetable.getLoopLength. Annotations @Override

getLoopStart	back to summary
public float getLoopStart() Implements com.sun.media.sound.ModelWavetable.getLoopStart. Annotations @Override

getLoopType	back to summary
public int getLoopType() Implements com.sun.media.sound.ModelWavetable.getLoopType. Annotations @Override

getPitchcorrection	back to summary
public float getPitchcorrection() Implements com.sun.media.sound.ModelWavetable.getPitchcorrection. Annotations @Override

open	back to summary
public ModelOscillatorStream open(float samplerate) Implements com.sun.media.sound.ModelOscillator.open. Annotations @Override

openStream	back to summary
public AudioFloatInputStream openStream() Implements com.sun.media.sound.ModelWavetable.openStream. Annotations @Override

set8BitExtensionBuffer	back to summary
public void set8BitExtensionBuffer(ModelByteBuffer buffer)

setAttenuation	back to summary
public void setAttenuation(float attenuation)

setLoopLength	back to summary
public void setLoopLength(float loopLength)

setLoopStart	back to summary
public void setLoopStart(float loopStart)

setLoopType	back to summary
public void setLoopType(int loopType)

setPitchcorrection	back to summary
public void setPitchcorrection(float pitchcorrection)

private Class ModelByteBufferWavetable.Buffer8PlusInputStream

Class Inheritance

java.lang.Object
java.io.InputStream
com.sun.media.sound.ModelByteBufferWavetable.Buffer8PlusInputStream

Field Summary

Modifier and Type	Field and Description
private final boolean	bigendian
private final int	framesize_pc
pack-priv int	markpos
pack-priv int	markpos2
pack-priv int	pos
pack-priv int	pos2

Constructor Summary

Access	Constructor and Description
pack-priv	Buffer8PlusInputStream()

Method Summary

Modifier and Type	Method and Description
public int	available() Overrides java.io.InputStream.available. Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected.
public synchronized void	mark(int readlimit) Overrides java.io.InputStream.mark. Marks the current position in this input stream.
public boolean	markSupported() Overrides java.io.InputStream.markSupported. Tests if this input stream supports the `mark` and `reset` methods.
public int	read(byte[] b, int off, int len) Overrides java.io.InputStream.read. Reads up to `len` bytes of data from the input stream into an array of bytes.
public int	read(byte[] b) Overrides java.io.InputStream.read. Reads some number of bytes from the input stream and stores them into the buffer array `b`.
public int	read() Implements abstract java.io.InputStream.read. Reads the next byte of data from the input stream.
public synchronized void	reset() Overrides java.io.InputStream.reset. Repositions this stream to the position at the time the `mark` method was last called on this input stream.
public long	skip(long n) Overrides java.io.InputStream.skip. Skips over and discards `n` bytes of data from this input stream.

Inherited from java.io.InputStream:: close nullInputStream readAllBytes readNBytes readNBytes skipNBytes transferTo

Field Detail

bigendian	back to summary
private final boolean bigendian

framesize_pc	back to summary
private final int framesize_pc

markpos	back to summary
pack-priv int markpos

markpos2	back to summary
pack-priv int markpos2

pos	back to summary
pack-priv int pos

pos2	back to summary
pack-priv int pos2

Constructor Detail

Buffer8PlusInputStream	back to summary
pack-priv Buffer8PlusInputStream()

Method Detail

available back to summary

available	back to summary
public int available() throws IOException Overrides java.io.InputStream.available. Doc from java.io.InputStream.available. Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected. The read might be on the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes. Note that while some implementations of `InputStream` will return the total number of bytes in the stream, many will not. It is never correct to use the return value of this method to allocate a buffer intended to hold all data in this stream. A subclass's implementation of this method may choose to throw an `IOException` if this input stream has been closed by invoking the `close()` method. Annotations @Override Exceptions IOException: if an I/O error occurs.

public int available() throws IOException

Overrides java.io.InputStream.available.

Doc from java.io.InputStream.available.

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected. The read might be on the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes.

Note that while some implementations of InputStream will return the total number of bytes in the stream, many will not. It is never correct to use the return value of this method to allocate a buffer intended to hold all data in this stream.

A subclass's implementation of this method may choose to throw an IOException if this input stream has been closed by invoking the close() method.

Annotations

@Override

Exceptions

IOException:: if an I/O error occurs.

mark back to summary

mark	back to summary
public synchronized void mark(int readlimit) Overrides java.io.InputStream.mark. Doc from java.io.InputStream.mark. Marks the current position in this input stream. A subsequent call to the `reset` method repositions this stream at the last marked position so that subsequent reads re-read the same bytes. The `readlimit` arguments tells this input stream to allow that many bytes to be read before the mark position gets invalidated. The general contract of `mark` is that, if the method `markSupported` returns `true`, the stream somehow remembers all the bytes read after the call to `mark` and stands ready to supply those same bytes again if and whenever the method `reset` is called. However, the stream is not required to remember any data at all if more than `readlimit` bytes are read from the stream before `reset` is called. Marking a closed stream should not have any effect on the stream. Annotations @Override

public synchronized void mark(int readlimit)

Overrides java.io.InputStream.mark.

Doc from java.io.InputStream.mark.

Marks the current position in this input stream. A subsequent call to the reset method repositions this stream at the last marked position so that subsequent reads re-read the same bytes.

The readlimit arguments tells this input stream to allow that many bytes to be read before the mark position gets invalidated.

The general contract of mark is that, if the method markSupported returns true, the stream somehow remembers all the bytes read after the call to mark and stands ready to supply those same bytes again if and whenever the method reset is called. However, the stream is not required to remember any data at all if more than readlimit bytes are read from the stream before reset is called.

Marking a closed stream should not have any effect on the stream.

Annotations

@Override

markSupported back to summary

markSupported	back to summary
public boolean markSupported() Overrides java.io.InputStream.markSupported. Doc from java.io.InputStream.markSupported. Tests if this input stream supports the `mark` and `reset` methods. Whether or not `mark` and `reset` are supported is an invariant property of a particular input stream instance. Annotations @Override

public boolean markSupported()

Overrides java.io.InputStream.markSupported.

Doc from java.io.InputStream.markSupported.

Tests if this input stream supports the mark and reset methods. Whether or not mark and reset are supported is an invariant property of a particular input stream instance.

Annotations

@Override

read back to summary

read	back to summary
public int read(byte[] b, int off, int len) throws IOException Overrides java.io.InputStream.read. Doc from java.io.InputStream.read. Reads up to `len` bytes of data from the input stream into an array of bytes. An attempt is made to read as many as `len` bytes, but a smaller number may be read. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown. If `len` is zero, then no bytes are read and `0` is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value `-1` is returned; otherwise, at least one byte is read and stored into `b`. The first byte read is stored into element `b[off]`, the next one into `b[off+1]`, and so on. The number of bytes read is, at most, equal to `len`. Let k be the number of bytes actually read; these bytes will be stored in elements `b[off]` through `b[off+`k`-1]`, leaving elements `b[off+`k`]` through `b[off+len-1]` unaffected. In every case, elements `b[0]` through `b[off-1]` and elements `b[off+len]` through `b[b.length-1]` are unaffected. Annotations @Override Exceptions IOException: If the first byte cannot be read for any reason other than end of file, or if the input stream has been closed, or if some other I/O error occurs.

public int read(byte[] b, int off, int len) throws IOException

Overrides java.io.InputStream.read.

Doc from java.io.InputStream.read.

Reads up to len bytes of data from the input stream into an array of bytes. An attempt is made to read as many as len bytes, but a smaller number may be read. The number of bytes actually read is returned as an integer.

This method blocks until input data is available, end of file is detected, or an exception is thrown.

If len is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[off], the next one into b[off+1], and so on. The number of bytes read is, at most, equal to len. Let k be the number of bytes actually read; these bytes will be stored in elements b[off] through b[off+k-1], leaving elements b[off+k] through b[off+len-1] unaffected.

In every case, elements b[0] through b[off-1] and elements b[off+len] through b[b.length-1] are unaffected.

Annotations

@Override

Exceptions

IOException:: If the first byte cannot be read for any reason other than end of file, or if the input stream has been closed, or if some other I/O error occurs.

read back to summary

read	back to summary
public int read(byte[] b) throws IOException Overrides java.io.InputStream.read. Doc from java.io.InputStream.read. Reads some number of bytes from the input stream and stores them into the buffer array `b`. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown. If the length of `b` is zero, then no bytes are read and `0` is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at the end of the file, the value `-1` is returned; otherwise, at least one byte is read and stored into `b`. The first byte read is stored into element `b[0]`, the next one into `b[1]`, and so on. The number of bytes read is, at most, equal to the length of `b`. Let k be the number of bytes actually read; these bytes will be stored in elements `b[0]` through `b[`k`-1]`, leaving elements `b[`k`]` through `b[b.length-1]` unaffected. Annotations @Override Exceptions IOException: If the first byte cannot be read for any reason other than the end of the file, if the input stream has been closed, or if some other I/O error occurs.

public int read(byte[] b) throws IOException

Overrides java.io.InputStream.read.

Doc from java.io.InputStream.read.

Reads some number of bytes from the input stream and stores them into the buffer array b. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown.

If the length of b is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at the end of the file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[0], the next one into b[1], and so on. The number of bytes read is, at most, equal to the length of b. Let k be the number of bytes actually read; these bytes will be stored in elements b[0] through b[k-1], leaving elements b[k] through b[b.length-1] unaffected.

Annotations

@Override

Exceptions

IOException:: If the first byte cannot be read for any reason other than the end of the file, if the input stream has been closed, or if some other I/O error occurs.

read back to summary

read	back to summary
public int read() throws IOException Implements abstract java.io.InputStream.read. Doc from java.io.InputStream.read. Reads the next byte of data from the input stream. The value byte is returned as an `int` in the range `0` to `255`. If no byte is available because the end of the stream has been reached, the value `-1` is returned. This method blocks until input data is available, the end of the stream is detected, or an exception is thrown. Annotations @Override Exceptions IOException: if an I/O error occurs.

public int read() throws IOException

Implements abstract java.io.InputStream.read.

Doc from java.io.InputStream.read.

Reads the next byte of data from the input stream. The value byte is returned as an int in the range 0 to 255. If no byte is available because the end of the stream has been reached, the value -1 is returned. This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

Annotations

@Override

Exceptions

IOException:: if an I/O error occurs.

reset back to summary

reset	back to summary
public synchronized void reset() throws IOException Overrides java.io.InputStream.reset. Doc from java.io.InputStream.reset. Repositions this stream to the position at the time the `mark` method was last called on this input stream. The general contract of `reset` is: If the method `markSupported` returns `true`, then: If the method `mark` has not been called since the stream was created, or the number of bytes read from the stream since `mark` was last called is larger than the argument to `mark` at that last call, then an `IOException` might be thrown. If such an `IOException` is not thrown, then the stream is reset to a state such that all the bytes read since the most recent call to `mark` (or since the start of the file, if `mark` has not been called) will be resupplied to subsequent callers of the `read` method, followed by any bytes that otherwise would have been the next input data as of the time of the call to `reset`. If the method `markSupported` returns `false`, then: The call to `reset` may throw an `IOException`. If an `IOException` is not thrown, then the stream is reset to a fixed state that depends on the particular type of the input stream and how it was created. The bytes that will be supplied to subsequent callers of the `read` method depend on the particular type of the input stream. Annotations @Override Exceptions IOException: if this stream has not been marked or if the mark has been invalidated.

public synchronized void reset() throws IOException

Overrides java.io.InputStream.reset.

Doc from java.io.InputStream.reset.

Repositions this stream to the position at the time the mark method was last called on this input stream.

The general contract of reset is:

If the method markSupported returns true, then:
- If the method mark has not been called since the stream was created, or the number of bytes read from the stream since mark was last called is larger than the argument to mark at that last call, then an IOException might be thrown.
- If such an IOException is not thrown, then the stream is reset to a state such that all the bytes read since the most recent call to mark (or since the start of the file, if mark has not been called) will be resupplied to subsequent callers of the read method, followed by any bytes that otherwise would have been the next input data as of the time of the call to reset.
If the method markSupported returns false, then:
- The call to reset may throw an IOException.
- If an IOException is not thrown, then the stream is reset to a fixed state that depends on the particular type of the input stream and how it was created. The bytes that will be supplied to subsequent callers of the read method depend on the particular type of the input stream.

Annotations

@Override

Exceptions

IOException:: if this stream has not been marked or if the mark has been invalidated.

skip back to summary

public long skip(long n) throws IOException

Overrides java.io.InputStream.skip.

Doc from java.io.InputStream.skip.

Skips over and discards n bytes of data from this input stream. The skip method may, for a variety of reasons, end up skipping over some smaller number of bytes, possibly 0. This may result from any of a number of conditions; reaching end of file before n bytes have been skipped is only one possibility. The actual number of bytes skipped is returned. If n is negative, the skip method for class InputStream always returns 0, and no bytes are skipped. Subclasses may handle the negative value differently.

Annotations

@Override

Exceptions

IOException:: if an I/O error occurs.

public final Class ModelByteBufferWavetable

Nested and Inner Type Summary

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail

private Class ModelByteBufferWavetable.Buffer8PlusInputStream

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail