Implements com.sun.jdi.ObjectReference.disableCollection.

Doc from com.sun.jdi.ObjectReference.disableCollection.

Prevents garbage collection for this object. By default all ObjectReference values returned by JDI may be collected at any time the target VM is running. A call to this method guarantees that the object will not be collected. enableCollection can be used to allow collection once again.

Calls to this method are counted. Every call to this method requires a corresponding call to enableCollection before garbage collection is re-enabled.

Note that while the target VM is suspended, no garbage collection will occur because all threads are suspended. The typical examination of variables, fields, and arrays during the suspension is safe without explicitly disabling garbage collection.

This method should be used sparingly, as it alters the pattern of garbage collection in the target VM and, consequently, may result in application behavior under the debugger that differs from its non-debugged behavior.

Implements com.sun.jdi.ObjectReference.enableCollection.

Doc from com.sun.jdi.ObjectReference.enableCollection.

Permits garbage collection for this object. By default all ObjectReference values returned by JDI may be collected at any time the target VM is running. A call to this method is necessary only if garbage collection was previously disabled with disableCollection.

Implements com.sun.jdi.ObjectReference.entryCount.

Doc from com.sun.jdi.ObjectReference.entryCount.

Returns the number of times this object's monitor has been entered by the current owning thread if the owning thread is platform thread; Returns 0 if not owned by a platform thread. See ThreadReference#ownedMonitors for a definition of ownership.

Not all target VMs support this operation. See VirtualMachine#canGetMonitorInfo to determine if the operation is supported.

Exceptions

IncompatibleThreadStateException:

if the owning thread is not suspended in the target VM

Overrides com.sun.tools.jdi.MirrorImpl.equals.

Implements com.sun.jdi.ObjectReference.equals.

Doc from com.sun.jdi.ObjectReference.equals.

Compares the specified Object with this ObjectReference for equality.

Implements com.sun.jdi.ObjectReference.getValue.

Doc from com.sun.jdi.ObjectReference.getValue.

Gets the value of a given instance or static field in this object. The Field must be valid for this ObjectReference; that is, it must be from the mirrored object's class or a superclass of that class.

Implements com.sun.jdi.ObjectReference.getValues.

Doc from com.sun.jdi.ObjectReference.getValues.

Gets the value of multiple instance and/or static fields in this object. The Fields must be valid for this ObjectReference; that is, they must be from the mirrored object's class or a superclass of that class.

Overrides com.sun.tools.jdi.MirrorImpl.hashCode.

Implements com.sun.jdi.ObjectReference.hashCode.

Doc from com.sun.jdi.ObjectReference.hashCode.

Returns the hash code value for this ObjectReference.

Annotations

@Override

Implements com.sun.jdi.ObjectReference.invokeMethod.

Doc from com.sun.jdi.ObjectReference.invokeMethod.

Invokes the specified Method on this object in the target VM. The specified method can be defined in this object's class, in a superclass of this object's class, or in an interface implemented by this object. The method may be a static method or an instance method, but not a static initializer or constructor. Use ClassType#newInstance to create a new object and run its constructor.

The method invocation will occur in the specified thread. Method invocation can occur only if the specified thread has been suspended by an event which occurred in that thread. Method invocation is not supported when the target VM has been suspended through VirtualMachine#suspend or when the specified thread is suspended through ThreadReference#suspend.

The specified method is invoked with the arguments in the specified argument list. The method invocation is synchronous; this method does not return until the invoked method returns in the target VM. If the invoked method throws an exception, this method will throw an InvocationException which contains a mirror to the exception object thrown.

Object arguments must be assignment compatible with the argument type (This implies that the argument type must be loaded through the enclosing class's class loader). Primitive arguments must be either assignment compatible with the argument type or must be convertible to the argument type without loss of information. If the method being called accepts a variable number of arguments, then the last argument type is an array of some component type. The argument in the matching position can be omitted, or can be null, an array of the same component type, or an argument of the component type followed by any number of other arguments of the same type. If the argument is omitted, then a 0 length array of the component type is passed. The component type can be a primitive type. Autoboxing is not supported. See section 5.2 of The Java Language Specification for more information on assignment compatibility.

By default, the method is invoked using dynamic lookup as documented in section 15.12.4.4 of The Java Language Specification in particular, overriding based on the runtime type of the object mirrored by this ObjectReference will occur. This behavior can be changed by specifying the INVOKE_NONVIRTUAL bit flag in the options argument. If this flag is set, the specified method is invoked whether or not it is overridden for this object's runtime type. The method, in this case, must have an implementation, either in a class or an interface. This option is useful for performing method invocations like those done with the super keyword in the Java programming language.

By default, all threads in the target VM are resumed while the method is being invoked if they were previously suspended by an event or by VirtualMachine#suspend or ThreadReference#suspend. This is done to prevent the deadlocks that will occur if any of the threads own resources, such as monitors, that will be needed by the invoked method. Note, however, that this implicit resume acts exactly like ThreadReference#resume, so if the thread's suspend count is greater than 1, it will remain in a suspended state during the invocation and thus a deadlock could still occur. By default, when the invocation completes, all threads in the target VM are suspended, regardless their state before the invocation. It is possible that breakpoints or other events might occur during the invocation. This can cause deadlocks as described above. It can also cause a deadlock if invokeMethod is called from the client's event handler thread. In this case, this thread will be waiting for the invokeMethod to complete and won't read the EventSet that comes in for the new event. If this new EventSet is SUSPEND_ALL, then a deadlock will occur because no one will resume the EventSet. To avoid this, all EventRequests should be disabled before doing the invokeMethod, or the invokeMethod should not be done from the client's event handler thread.

The resumption of other threads during the invocation can be prevented by specifying the INVOKE_SINGLE_THREADED bit flag in the options argument; however, there is no protection against or recovery from the deadlocks described above, so this option should be used with great caution. Only the specified thread will be resumed (as described for all threads above). Upon completion of a single threaded invoke, the invoking thread will be suspended once again. Note that any threads started during the single threaded invocation will not be suspended when the invocation completes.

If the target VM is disconnected during the invoke (for example, through VirtualMachine#dispose) the method invocation continues.

Exceptions

InvalidTypeException:

If the arguments do not meet this requirement -- Object arguments must be assignment compatible with the argument type. This implies that the argument type must be loaded through the enclosing class's class loader. Primitive arguments must be either assignment compatible with the argument type or must be convertible to the argument type without loss of information. See JLS section 5.2 for more information on assignment compatibility.

IncompatibleThreadStateException:

if the specified thread has not been suspended by an event.

InvocationException:

if the method invocation resulted in an exception in the target VM.

ClassNotLoadedException:

if any argument type has not yet been loaded through the appropriate class loader.

Implements com.sun.jdi.ObjectReference.isCollected.

Doc from com.sun.jdi.ObjectReference.isCollected.

Determines if this object has been garbage collected in the target VM.

Implements com.sun.jdi.ObjectReference.owningThread.

Doc from com.sun.jdi.ObjectReference.owningThread.

Returns a ThreadReference for the platform thread, if any, which currently owns this object's monitor. See ThreadReference#ownedMonitors for a definition of ownership.

Not all target VMs support this operation. See VirtualMachine#canGetMonitorInfo to determine if the operation is supported.

Exceptions

IncompatibleThreadStateException:

if the owning thread is not suspended in the target VM

Implements com.sun.jdi.ObjectReference.referenceType.

Doc from com.sun.jdi.ObjectReference.referenceType.

Gets the ReferenceType that mirrors the type of this object. The type may be a subclass or implementor of the declared type of any field or variable which currently holds it. For example, right after the following statement.

Object obj = new String("Hello, world!");

The ReferenceType of obj will mirror java.lang.String and not java.lang.Object.

The type of an object never changes, so this method will always return the same ReferenceType over the lifetime of the mirrored object.

The returned ReferenceType will be a ClassType or ArrayType and never an InterfaceType.

Implements com.sun.jdi.ObjectReference.referringObjects.

Doc from com.sun.jdi.ObjectReference.referringObjects.

Returns objects that directly reference this object. Only objects that are reachable for the purposes of garbage collection are returned. Note that an object can also be referenced in other ways, such as from a local variable in a stack frame, or from a JNI global reference. Such non-object referrers are not returned by this method.

Not all target virtual machines support this operation. Use VirtualMachine#canGetInstanceInfo() to determine if the operation is supported.

Implements com.sun.jdi.ObjectReference.setValue.

Doc from com.sun.jdi.ObjectReference.setValue.

Sets the value of a given instance or static field in this object. The Field must be valid for this ObjectReference; that is, it must be from the mirrored object's class or a superclass of that class. The field must not be final.

Object values must be assignment compatible with the field type (This implies that the field type must be loaded through the enclosing class's class loader). Primitive values must be either assignment compatible with the field type or must be convertible to the field type without loss of information. See section 5.2 of The Java Language Specification for more information on assignment compatibility.

Exceptions

InvalidTypeException:

if the value's type does not match the field's type.

ClassNotLoadedException:

if 'value' is not null, and the field type has not yet been loaded through the appropriate class loader.

Overrides java.lang.Object.toString.

Implements com.sun.jdi.Mirror.toString.

Doc from com.sun.jdi.Mirror.toString.

Returns a String describing this mirror

Implements com.sun.jdi.Value.type.

Doc from com.sun.jdi.Value.type.

Returns the run-time type of this value.

Implements com.sun.jdi.ObjectReference.uniqueID.

Doc from com.sun.jdi.ObjectReference.uniqueID.

Returns a unique identifier for this ObjectReference. It is guaranteed to be unique among all ObjectReferences from the same VM that have not yet been disposed. The guarantee applies as long as this ObjectReference has not yet been disposed.

Implements com.sun.tools.jdi.VMListener.vmNotSuspended.

Implements com.sun.tools.jdi.VMListener.vmSuspended.

Implements com.sun.jdi.ObjectReference.waitingThreads.

Doc from com.sun.jdi.ObjectReference.waitingThreads.

Returns a List containing a ThreadReference for each platform thread currently waiting for this object's monitor. See ThreadReference#currentContendedMonitor for information about when a thread is considered to be waiting for a monitor.

Not all target VMs support this operation. See VirtualMachine#canGetMonitorInfo to determine if the operation is supported.

Exceptions

IncompatibleThreadStateException:

if any waiting thread is not suspended in the target VM