Converts surfaceData to the particular subclass or throws InvalidPipeException

Performs a copyarea within this surface. Returns false if there is no algorithm to perform the copyarea given the current settings of the SunGraphics2D.

Parameters

x:int

the x coordinate of the area in device space

y:int

the y coordinate of the area in device space

w:int

the width of the area in device space

h:int

the height of the area in device space

Synchronously releases resources associated with this surface.

Returns the bounds of the destination surface.

Return the ColorModel for the destination surface.

Returns default horizontal scale factor of the destination surface. Scale factor describes the mapping between virtual and physical coordinates of the SurfaceData. If the scale is 2 then virtual pixel coordinates need to be doubled for physical pixels.

Returns default vertical scale factor of the destination surface. Scale factor describes the mapping between virtual and physical coordinates of the SurfaceData. If the scale is 2 then virtual pixel coordinates need to be doubled for physical pixels.

Returns destination associated with this SurfaceData. This could be either an Image or a Component; subclasses of SurfaceData are responsible for returning the appropriate object.

Return the GraphicsConfiguration object that describes this destination surface.

Implements sun.java2d.DisposerTarget.getDisposerReferent.

Doc from sun.java2d.DisposerTarget.getDisposerReferent.

Returns an object which will be used as the referent in the ReferenceQueue

Extracts the SurfaceManager from the given Image, and then returns the SurfaceData object that would best be suited as the destination surface in some rendering operation.

Return a readable Raster which contains the pixels for the specified rectangular region of the destination surface. The coordinate origin of the returned Raster is the same as the device space origin of the destination surface. In some cases the returned Raster might also be writeable. In most cases, the returned Raster might contain more pixels than requested.

See Also

useTightBBoxes

Return a RenderLoops object containing all of the basic GraphicsPrimitive objects for rendering to the destination surface with the current attributes of the given SunGraphics2D.

Certain changes in the configuration of a surface require the invalidation of existing associated SurfaceData objects and the creation of brand new ones. These changes include size, ColorModel, or SurfaceType. Existing Graphics objects which are directed at such surfaces, however, must continue to render to them even after the change occurs underneath the covers. The getReplacement() method is called from SunGraphics2D.revalidateAll() when the associated SurfaceData is found to be invalid so that a Graphics object can continue to render to the surface in its new configuration. Such changes only tend to happen to window based surfaces since most image based surfaces never change size or pixel format. Even VolatileImage objects never change size and they only change their pixel format when manually validated against a new GraphicsConfiguration, at which point old Graphics objects are no longer expected to render to them after the validation step. Thus, only window based surfaces really need to deal with this form of replacement.

This method is called on a destination SurfaceData to choose the best SurfaceData from a source Image for an imaging operation, with help from its SurfaceManager. The method may determine that the default SurfaceData was really the best choice in the first place, or it may decide to use a cached surface. Some general decisions about whether acceleration is enabled are made by this method, but any decision based on the type of the source image is made in the makeProxyFor method below when it comes up with the appropriate SurfaceDataProxy instance. The parameters describe the type of imaging operation being performed.

If a blitProxyCache was supplied by the subclass then it is used to potentially override the choice of source SurfaceData. The outline of this process is:

1. Image pipeline asks destSD to find an appropriate srcSD for a given source Image object.
2. destSD gets the SurfaceManager of the source Image and first retrieves the default SD from it using getPrimarySurfaceData()
3. destSD uses its "blit proxy cache" (if set) to look for some cached data corresponding to the the source SurfaceManager
4. If the cached data is null then makeProxyFor() is used to create some cached data which is stored back in the source SurfaceManager under the same key for future uses.
5. The cached data will be a SurfaceDataProxy object.
6. The SurfaceDataProxy object is then consulted to return a replacement SurfaceData object (typically a cached copy if appropriate, or the original if not).

Implements sun.java2d.StateTrackable.getState.

Doc from sun.java2d.StateTrackable.getState.

Returns the general state of the complex data held by this object. This return value can be used to determine if it makes strategic sense to try and cache information about the current contents of this object. The StateTracker returned from the getStateTracker() method will further aid in determining when the data has been changed so that the caches can be verified upon future uses.

Implements sun.java2d.StateTrackable.getStateTracker.

Doc from sun.java2d.StateTrackable.getStateTracker.

Returns an object which can track future changes to the complex data stored in this object. If an external agent caches information about the complex data of this object, it should first get a StateTracker object from this method so that it can check if such information is current upon future uses. Note that a valid StateTracker will always be returned regardless of the return value of getState(), but in some cases the StateTracker may be a trivial implementation which always returns the same value from its isCurrent method.

• If the current state is IMMUTABLE, this StateTracker and any future StateTracker objects returned from this method will always indicate that the state has not changed.
• If the current state is UNTRACKABLE, this StateTracker and any future StateTracker objects returned from this method will always indicate that the state has changed.
• If the current state is DYNAMIC, this StateTracker may always indicate that the current state has changed, but another StateTracker returned from this method in the future when the state has changed to STABLE will correctly track changes.
• Otherwise the current state is STABLE and this StateTracker will indicate whether or not the data has changed since the time at which it was fetched from the object.

Return the SurfaceType object that describes the destination surface.

Implements java.awt.Transparency.getTransparency.

Returns the type of this Transparency.

Returns:int

the field type of this Transparency, which is either OPAQUE, BITMASK or TRANSLUCENT.

Sets this SurfaceData object to the invalid state. All Graphics objects must get a new SurfaceData object via the refresh method and revalidate their pipelines before continuing.

For our purposes null and NullSurfaceData are the same as they represent a disposed surface.

Returns a boolean indicating whether or not this SurfaceData is valid.

This method is called on a destination SurfaceData to choose a proper SurfaceDataProxy subclass for a source SurfaceData to use to control when and with what surface to override a given image operation. The argument is the default SurfaceData for the source Image.

The type of the return object is chosen based on the acceleration capabilities of this SurfaceData and the type of the given source SurfaceData object.

In some cases the original SurfaceData will always be the best choice to use to blit to this SurfaceData. This can happen if the source image is a hardware surface of the same type as this one and so acceleration will happen without any caching. It may also be the case that the source image can never be accelerated on this SurfaceData - for example because it is translucent and there are no accelerated translucent image ops for this surface.

In those cases there is a special SurfaceDataProxy.UNCACHED instance that represents a NOP for caching purposes - it always returns the original sourceSD object as the replacement copy so no caching is ever performed.

Construct and return a RenderLoops object containing all of the basic GraphicsPrimitive objects for rendering to the destination surface with the given source, destination, and composite types.

Marks this surface as dirty.

Returns the pixel data for the specified Argb value packed into an integer for easy storage and conveyance.

Returns the pixel data for the specified color packed into an integer for easy storage and conveyance. This method will use the getRGB() method of the Color object and defer to the pixelFor(int rgb) method if not overridden. For now this is a convenience function, but for cases where the highest quality color conversion is requested, this method should be overridden in those cases so that a more direct conversion of the color to the destination color space can be done using the additional information in the Color object.

Restores the contents of the given Image and then returns the new SurfaceData object in use by the Image's SurfaceManager.

Returns the Argb representation for the specified integer value which is packed in the format of the associated ColorModel.

Sets the value of the surfaceLost variable, which indicates whether something has happened to the rendering surface such that it needs to be restored and re-rendered.

Does the pixel accessibility of the destination surface suggest that rendering algorithms might want to take extra time to calculate a more accurate bounding box for the operation being performed? The typical case when this will be true is when a copy of the pixels has to be made when doing a getRaster. The fewer pixels copied, the faster the operation will go.

See Also

getRaster