libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.collision.btBroadphasePair

Modifier and Type	Field and Description
protected static final Pool<btBroadphasePair>	pool Pool of btBroadphasePair instances, used by director interface to provide the arguments.
private long	swigCPtr
protected static final btBroadphasePair	temp Temporary instance, use by native methods that return a btBroadphasePair instance

Access	Constructor and Description
protected	btBroadphasePair(final String className, long cPtr, boolean cMemoryOwn)
public	btBroadphasePair(long cPtr, boolean cMemoryOwn) Construct a new btBroadphasePair, normally you should not need this constructor it's intended for low-level usage.
public	btBroadphasePair()
public	btBroadphasePair(btBroadphasePair other)
public	btBroadphasePair(btBroadphaseProxy proxy0, btBroadphaseProxy proxy1)

Method Summary

Modifier and Type	Method and Description
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public static void	free(final btBroadphasePair inst) delete the native object if required and allow the instance to be reused by the obtain method
public btCollisionAlgorithm	getAlgorithm()
public static long	getCPtr(btBroadphasePair obj)
public long	getInternalInfo1()
public int	getInternalTmpValue()
public btBroadphaseProxy	getPProxy0()
public btBroadphaseProxy	getPProxy1()
public static btBroadphasePair	internalTemp(long cPtr, boolean own)
public static btBroadphasePair	obtain(long cPtr, boolean own) Reuses a previous freed instance or creates a new instance and set it to reflect the specified native object
public void	operatorDelete(long ptr)
public void	operatorDelete(long arg0, long arg1)
public void	operatorDeleteArray(long ptr)
public void	operatorDeleteArray(long arg0, long arg1)
public long	operatorNew(long sizeInBytes)
public long	operatorNew(long arg0, long ptr)
public long	operatorNewArray(long sizeInBytes)
public long	operatorNewArray(long arg0, long ptr)
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public void	setAlgorithm(btCollisionAlgorithm value)
public void	setInternalInfo1(long value)
public void	setInternalTmpValue(int value)
public void	setPProxy0(btBroadphaseProxy value)
public void	setPProxy1(btBroadphaseProxy value)

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: construct destroy dispose equals getCPointer hashCode hasOwnership isDisposed isObtained obtain release releaseOwnership takeOwnership toString

pool	back to summary
protected static final Pool<btBroadphasePair> pool Pool of btBroadphasePair instances, used by director interface to provide the arguments.

swigCPtr	back to summary
private long swigCPtr

temp	back to summary
protected static final btBroadphasePair temp Temporary instance, use by native methods that return a btBroadphasePair instance

btBroadphasePair	back to summary
protected btBroadphasePair(final String className, long cPtr, boolean cMemoryOwn)

btBroadphasePair	back to summary
public btBroadphasePair(long cPtr, boolean cMemoryOwn) Construct a new btBroadphasePair, normally you should not need this constructor it's intended for low-level usage.

btBroadphasePair	back to summary
public btBroadphasePair()

btBroadphasePair	back to summary
public btBroadphasePair(btBroadphasePair other)

btBroadphasePair	back to summary
public btBroadphasePair(btBroadphaseProxy proxy0, btBroadphaseProxy proxy1)

Method Detail

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

free	back to summary
public static void free(final btBroadphasePair inst) delete the native object if required and allow the instance to be reused by the obtain method

getAlgorithm	back to summary
public btCollisionAlgorithm getAlgorithm()

getCPtr	back to summary
public static long getCPtr(btBroadphasePair obj)

getInternalInfo1	back to summary
public long getInternalInfo1()

getInternalTmpValue	back to summary
public int getInternalTmpValue()

getPProxy0	back to summary
public btBroadphaseProxy getPProxy0()

getPProxy1	back to summary
public btBroadphaseProxy getPProxy1()

internalTemp	back to summary
public static btBroadphasePair internalTemp(long cPtr, boolean own)

obtain	back to summary
public static btBroadphasePair obtain(long cPtr, boolean own) Reuses a previous freed instance or creates a new instance and set it to reflect the specified native object

operatorDelete	back to summary
public void operatorDelete(long ptr)

operatorDelete	back to summary
public void operatorDelete(long arg0, long arg1)

operatorDeleteArray	back to summary
public void operatorDeleteArray(long ptr)

operatorDeleteArray	back to summary
public void operatorDeleteArray(long arg0, long arg1)

operatorNew	back to summary
public long operatorNew(long sizeInBytes)

operatorNew	back to summary
public long operatorNew(long arg0, long ptr)

operatorNewArray	back to summary
public long operatorNewArray(long sizeInBytes)

operatorNewArray	back to summary
public long operatorNewArray(long arg0, long ptr)

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

setAlgorithm	back to summary
public void setAlgorithm(btCollisionAlgorithm value)

setInternalInfo1	back to summary
public void setInternalInfo1(long value)

setInternalTmpValue	back to summary
public void setInternalTmpValue(int value)

setPProxy0	back to summary
public void setPProxy0(btBroadphaseProxy value)

setPProxy1	back to summary
public void setPProxy1(btBroadphaseProxy value)

public Class btBroadphasePair

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail