libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.collision.btCollisionObjectDoubleData

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	btCollisionObjectDoubleData(final String className, long cPtr, boolean cMemoryOwn)
public	btCollisionObjectDoubleData(long cPtr, boolean cMemoryOwn) Construct a new btCollisionObjectDoubleData, normally you should not need this constructor it's intended for low-level usage.
public	btCollisionObjectDoubleData()

Modifier and Type	Method and Description
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public int	getActivationState1()
public btVector3DoubleData	getAnisotropicFriction()
public long	getBroadphaseHandle()
public double	getCcdMotionThreshold()
public double	getCcdSweptSphereRadius()
public int	getCheckCollideWith()
public int	getCollisionFlags()
public long	getCollisionShape()
public int	getCompanionId()
public double	getContactDamping()
public double	getContactProcessingThreshold()
public double	getContactStiffness()
public static long	getCPtr(btCollisionObjectDoubleData obj)
public double	getDeactivationTime()
public double	getFriction()
public int	getHasAnisotropicFriction()
public double	getHitFraction()
public int	getInternalType()
public btVector3DoubleData	getInterpolationAngularVelocity()
public btVector3DoubleData	getInterpolationLinearVelocity()
public btTransformDoubleData	getInterpolationWorldTransform()
public int	getIslandTag1()
public String	getName()
public String	getPadding()
public double	getRestitution()
public double	getRollingFriction()
public btCollisionShapeData	getRootCollisionShape()
public btTransformDoubleData	getWorldTransform()
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public void	setActivationState1(int value)
public void	setAnisotropicFriction(btVector3DoubleData value)
public void	setBroadphaseHandle(long value)
public void	setCcdMotionThreshold(double value)
public void	setCcdSweptSphereRadius(double value)
public void	setCheckCollideWith(int value)
public void	setCollisionFlags(int value)
public void	setCollisionShape(long value)
public void	setCompanionId(int value)
public void	setContactDamping(double value)
public void	setContactProcessingThreshold(double value)
public void	setContactStiffness(double value)
public void	setDeactivationTime(double value)
public void	setFriction(double value)
public void	setHasAnisotropicFriction(int value)
public void	setHitFraction(double value)
public void	setInternalType(int value)
public void	setInterpolationAngularVelocity(btVector3DoubleData value)
public void	setInterpolationLinearVelocity(btVector3DoubleData value)
public void	setInterpolationWorldTransform(btTransformDoubleData value)
public void	setIslandTag1(int value)
public void	setName(String value)
public void	setPadding(String value)
public void	setRestitution(double value)
public void	setRollingFriction(double value)
public void	setRootCollisionShape(btCollisionShapeData value)
public void	setWorldTransform(btTransformDoubleData value)

swigCPtr	back to summary
private long swigCPtr

btCollisionObjectDoubleData	back to summary
protected btCollisionObjectDoubleData(final String className, long cPtr, boolean cMemoryOwn)

btCollisionObjectDoubleData	back to summary
public btCollisionObjectDoubleData(long cPtr, boolean cMemoryOwn) Construct a new btCollisionObjectDoubleData, normally you should not need this constructor it's intended for low-level usage.

btCollisionObjectDoubleData	back to summary
public btCollisionObjectDoubleData()

Method Detail

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getActivationState1	back to summary
public int getActivationState1()

getAnisotropicFriction	back to summary
public btVector3DoubleData getAnisotropicFriction()

getBroadphaseHandle	back to summary
public long getBroadphaseHandle()

getCcdMotionThreshold	back to summary
public double getCcdMotionThreshold()

getCcdSweptSphereRadius	back to summary
public double getCcdSweptSphereRadius()

getCheckCollideWith	back to summary
public int getCheckCollideWith()

getCollisionFlags	back to summary
public int getCollisionFlags()

getCollisionShape	back to summary
public long getCollisionShape()

getCompanionId	back to summary
public int getCompanionId()

getContactDamping	back to summary
public double getContactDamping()

getContactProcessingThreshold	back to summary
public double getContactProcessingThreshold()

getContactStiffness	back to summary
public double getContactStiffness()

getCPtr	back to summary
public static long getCPtr(btCollisionObjectDoubleData obj)

getDeactivationTime	back to summary
public double getDeactivationTime()

getFriction	back to summary
public double getFriction()

getHasAnisotropicFriction	back to summary
public int getHasAnisotropicFriction()

getHitFraction	back to summary
public double getHitFraction()

getInternalType	back to summary
public int getInternalType()

getInterpolationAngularVelocity	back to summary
public btVector3DoubleData getInterpolationAngularVelocity()

getInterpolationLinearVelocity	back to summary
public btVector3DoubleData getInterpolationLinearVelocity()

getInterpolationWorldTransform	back to summary
public btTransformDoubleData getInterpolationWorldTransform()

getIslandTag1	back to summary
public int getIslandTag1()

getName	back to summary
public String getName()

getPadding	back to summary
public String getPadding()

getRestitution	back to summary
public double getRestitution()

getRollingFriction	back to summary
public double getRollingFriction()

getRootCollisionShape	back to summary
public btCollisionShapeData getRootCollisionShape()

getWorldTransform	back to summary
public btTransformDoubleData getWorldTransform()

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

setActivationState1	back to summary
public void setActivationState1(int value)

setAnisotropicFriction	back to summary
public void setAnisotropicFriction(btVector3DoubleData value)

setBroadphaseHandle	back to summary
public void setBroadphaseHandle(long value)

setCcdMotionThreshold	back to summary
public void setCcdMotionThreshold(double value)

setCcdSweptSphereRadius	back to summary
public void setCcdSweptSphereRadius(double value)

setCheckCollideWith	back to summary
public void setCheckCollideWith(int value)

setCollisionFlags	back to summary
public void setCollisionFlags(int value)

setCollisionShape	back to summary
public void setCollisionShape(long value)

setCompanionId	back to summary
public void setCompanionId(int value)

setContactDamping	back to summary
public void setContactDamping(double value)

setContactProcessingThreshold	back to summary
public void setContactProcessingThreshold(double value)

setContactStiffness	back to summary
public void setContactStiffness(double value)

setDeactivationTime	back to summary
public void setDeactivationTime(double value)

setFriction	back to summary
public void setFriction(double value)

setHasAnisotropicFriction	back to summary
public void setHasAnisotropicFriction(int value)

setHitFraction	back to summary
public void setHitFraction(double value)

setInternalType	back to summary
public void setInternalType(int value)

setInterpolationAngularVelocity	back to summary
public void setInterpolationAngularVelocity(btVector3DoubleData value)

setInterpolationLinearVelocity	back to summary
public void setInterpolationLinearVelocity(btVector3DoubleData value)

setInterpolationWorldTransform	back to summary
public void setInterpolationWorldTransform(btTransformDoubleData value)

setIslandTag1	back to summary
public void setIslandTag1(int value)

setName	back to summary
public void setName(String value)

setPadding	back to summary
public void setPadding(String value)

setRestitution	back to summary
public void setRestitution(double value)

setRollingFriction	back to summary
public void setRollingFriction(double value)

setRootCollisionShape	back to summary
public void setRootCollisionShape(btCollisionShapeData value)

setWorldTransform	back to summary
public void setWorldTransform(btTransformDoubleData value)

public Class btCollisionObjectDoubleData

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail