libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.collision.btHashedSimplePairCache

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	btHashedSimplePairCache(final String className, long cPtr, boolean cMemoryOwn)
public	btHashedSimplePairCache(long cPtr, boolean cMemoryOwn) Construct a new btHashedSimplePairCache, normally you should not need this constructor it's intended for low-level usage.
public	btHashedSimplePairCache()

Modifier and Type	Method and Description
public btSimplePair	addOverlappingPair(int indexA, int indexB)
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public btSimplePair	findPair(int indexA, int indexB)
public int	GetCount()
public static long	getCPtr(btHashedSimplePairCache obj)
public int	getNumOverlappingPairs()
public SWIGTYPE_p_btAlignedObjectArrayT_btSimplePair_t	getOverlappingPairArray()
public SWIGTYPE_p_btAlignedObjectArrayT_btSimplePair_t	getOverlappingPairArrayConst()
public btSimplePair	getOverlappingPairArrayPtr()
public btSimplePair	getOverlappingPairArrayPtrConst()
public void	removeAllPairs()
public long	removeOverlappingPair(int indexA, int indexB)
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

swigCPtr	back to summary
private long swigCPtr

btHashedSimplePairCache	back to summary
protected btHashedSimplePairCache(final String className, long cPtr, boolean cMemoryOwn)

btHashedSimplePairCache	back to summary
public btHashedSimplePairCache(long cPtr, boolean cMemoryOwn) Construct a new btHashedSimplePairCache, normally you should not need this constructor it's intended for low-level usage.

btHashedSimplePairCache	back to summary
public btHashedSimplePairCache()

Method Detail

addOverlappingPair	back to summary
public btSimplePair addOverlappingPair(int indexA, int indexB)

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

findPair	back to summary
public btSimplePair findPair(int indexA, int indexB)

GetCount	back to summary
public int GetCount()

getCPtr	back to summary
public static long getCPtr(btHashedSimplePairCache obj)

getNumOverlappingPairs	back to summary
public int getNumOverlappingPairs()

getOverlappingPairArray	back to summary
public SWIGTYPE_p_btAlignedObjectArrayT_btSimplePair_t getOverlappingPairArray()

getOverlappingPairArrayConst	back to summary
public SWIGTYPE_p_btAlignedObjectArrayT_btSimplePair_t getOverlappingPairArrayConst()

getOverlappingPairArrayPtr	back to summary
public btSimplePair getOverlappingPairArrayPtr()

getOverlappingPairArrayPtrConst	back to summary
public btSimplePair getOverlappingPairArrayPtrConst()

removeAllPairs	back to summary
public void removeAllPairs()

removeOverlappingPair	back to summary
public long removeOverlappingPair(int indexA, int indexB)

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

public Class btHashedSimplePairCache

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail