libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.dynamics.btConeTwistConstraintData

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	btConeTwistConstraintData(final String className, long cPtr, boolean cMemoryOwn)
public	btConeTwistConstraintData(long cPtr, boolean cMemoryOwn) Construct a new btConeTwistConstraintData, normally you should not need this constructor it's intended for low-level usage.
public	btConeTwistConstraintData()

Method Summary

Modifier and Type	Method and Description
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public float	getBiasFactor()
public static long	getCPtr(btConeTwistConstraintData obj)
public float	getDamping()
public float	getLimitSoftness()
public String	getPad()
public btTransformFloatData	getRbAFrame()
public btTransformFloatData	getRbBFrame()
public float	getRelaxationFactor()
public float	getSwingSpan1()
public float	getSwingSpan2()
public float	getTwistSpan()
public btTypedConstraintData	getTypeConstraintData()
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public void	setBiasFactor(float value)
public void	setDamping(float value)
public void	setLimitSoftness(float value)
public void	setPad(String value)
public void	setRbAFrame(btTransformFloatData value)
public void	setRbBFrame(btTransformFloatData value)
public void	setRelaxationFactor(float value)
public void	setSwingSpan1(float value)
public void	setSwingSpan2(float value)
public void	setTwistSpan(float value)
public void	setTypeConstraintData(btTypedConstraintData value)

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: construct destroy dispose equals getCPointer hashCode hasOwnership isDisposed isObtained obtain release releaseOwnership takeOwnership toString

swigCPtr	back to summary
private long swigCPtr

btConeTwistConstraintData	back to summary
protected btConeTwistConstraintData(final String className, long cPtr, boolean cMemoryOwn)

btConeTwistConstraintData	back to summary
public btConeTwistConstraintData(long cPtr, boolean cMemoryOwn) Construct a new btConeTwistConstraintData, normally you should not need this constructor it's intended for low-level usage.

btConeTwistConstraintData	back to summary
public btConeTwistConstraintData()

Method Detail

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getBiasFactor	back to summary
public float getBiasFactor()

getCPtr	back to summary
public static long getCPtr(btConeTwistConstraintData obj)

getDamping	back to summary
public float getDamping()

getLimitSoftness	back to summary
public float getLimitSoftness()

getPad	back to summary
public String getPad()

getRbAFrame	back to summary
public btTransformFloatData getRbAFrame()

getRbBFrame	back to summary
public btTransformFloatData getRbBFrame()

getRelaxationFactor	back to summary
public float getRelaxationFactor()

getSwingSpan1	back to summary
public float getSwingSpan1()

getSwingSpan2	back to summary
public float getSwingSpan2()

getTwistSpan	back to summary
public float getTwistSpan()

getTypeConstraintData	back to summary
public btTypedConstraintData getTypeConstraintData()

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

setBiasFactor	back to summary
public void setBiasFactor(float value)

setDamping	back to summary
public void setDamping(float value)

setLimitSoftness	back to summary
public void setLimitSoftness(float value)

setPad	back to summary
public void setPad(String value)

setRbAFrame	back to summary
public void setRbAFrame(btTransformFloatData value)

setRbBFrame	back to summary
public void setRbBFrame(btTransformFloatData value)

setRelaxationFactor	back to summary
public void setRelaxationFactor(float value)

setSwingSpan1	back to summary
public void setSwingSpan1(float value)

setSwingSpan2	back to summary
public void setSwingSpan2(float value)

setTwistSpan	back to summary
public void setTwistSpan(float value)

setTypeConstraintData	back to summary
public void setTypeConstraintData(btTypedConstraintData value)

public Class btConeTwistConstraintData

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail