libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.dynamics.btConeTwistConstraintDoubleData

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	btConeTwistConstraintDoubleData(final String className, long cPtr, boolean cMemoryOwn)
public	btConeTwistConstraintDoubleData(long cPtr, boolean cMemoryOwn) Construct a new btConeTwistConstraintDoubleData, normally you should not need this constructor it's intended for low-level usage.
public	btConeTwistConstraintDoubleData()

Method Summary

Modifier and Type	Method and Description
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public double	getBiasFactor()
public static long	getCPtr(btConeTwistConstraintDoubleData obj)
public double	getDamping()
public double	getLimitSoftness()
public btTransformDoubleData	getRbAFrame()
public btTransformDoubleData	getRbBFrame()
public double	getRelaxationFactor()
public double	getSwingSpan1()
public double	getSwingSpan2()
public double	getTwistSpan()
public btTypedConstraintDoubleData	getTypeConstraintData()
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public void	setBiasFactor(double value)
public void	setDamping(double value)
public void	setLimitSoftness(double value)
public void	setRbAFrame(btTransformDoubleData value)
public void	setRbBFrame(btTransformDoubleData value)
public void	setRelaxationFactor(double value)
public void	setSwingSpan1(double value)
public void	setSwingSpan2(double value)
public void	setTwistSpan(double value)
public void	setTypeConstraintData(btTypedConstraintDoubleData value)

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: construct destroy dispose equals getCPointer hashCode hasOwnership isDisposed isObtained obtain release releaseOwnership takeOwnership toString

swigCPtr	back to summary
private long swigCPtr

btConeTwistConstraintDoubleData	back to summary
protected btConeTwistConstraintDoubleData(final String className, long cPtr, boolean cMemoryOwn)

btConeTwistConstraintDoubleData	back to summary
public btConeTwistConstraintDoubleData(long cPtr, boolean cMemoryOwn) Construct a new btConeTwistConstraintDoubleData, normally you should not need this constructor it's intended for low-level usage.

btConeTwistConstraintDoubleData	back to summary
public btConeTwistConstraintDoubleData()

Method Detail

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getBiasFactor	back to summary
public double getBiasFactor()

getCPtr	back to summary
public static long getCPtr(btConeTwistConstraintDoubleData obj)

getDamping	back to summary
public double getDamping()

getLimitSoftness	back to summary
public double getLimitSoftness()

getRbAFrame	back to summary
public btTransformDoubleData getRbAFrame()

getRbBFrame	back to summary
public btTransformDoubleData getRbBFrame()

getRelaxationFactor	back to summary
public double getRelaxationFactor()

getSwingSpan1	back to summary
public double getSwingSpan1()

getSwingSpan2	back to summary
public double getSwingSpan2()

getTwistSpan	back to summary
public double getTwistSpan()

getTypeConstraintData	back to summary
public btTypedConstraintDoubleData getTypeConstraintData()

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

setBiasFactor	back to summary
public void setBiasFactor(double value)

setDamping	back to summary
public void setDamping(double value)

setLimitSoftness	back to summary
public void setLimitSoftness(double value)

setRbAFrame	back to summary
public void setRbAFrame(btTransformDoubleData value)

setRbBFrame	back to summary
public void setRbBFrame(btTransformDoubleData value)

setRelaxationFactor	back to summary
public void setRelaxationFactor(double value)

setSwingSpan1	back to summary
public void setSwingSpan1(double value)

setSwingSpan2	back to summary
public void setSwingSpan2(double value)

setTwistSpan	back to summary
public void setTwistSpan(double value)

setTypeConstraintData	back to summary
public void setTypeConstraintData(btTypedConstraintDoubleData value)

public Class btConeTwistConstraintDoubleData

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail