libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.dynamics.btContactSolverInfoDoubleData

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	btContactSolverInfoDoubleData(final String className, long cPtr, boolean cMemoryOwn)
public	btContactSolverInfoDoubleData(long cPtr, boolean cMemoryOwn) Construct a new btContactSolverInfoDoubleData, normally you should not need this constructor it's intended for low-level usage.
public	btContactSolverInfoDoubleData()

Method Summary

Modifier and Type	Method and Description
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public static long	getCPtr(btContactSolverInfoDoubleData obj)
public double	getDamping()
public double	getErp()
public double	getErp2()
public double	getFriction()
public double	getGlobalCfm()
public double	getLinearSlop()
public double	getMaxErrorReduction()
public double	getMaxGyroscopicForce()
public int	getMinimumSolverBatchSize()
public int	getNumIterations()
public String	getPadding()
public int	getRestingContactRestitutionThreshold()
public double	getRestitution()
public double	getSingleAxisRollingFrictionThreshold()
public int	getSolverMode()
public double	getSor()
public int	getSplitImpulse()
public double	getSplitImpulsePenetrationThreshold()
public double	getSplitImpulseTurnErp()
public double	getTau()
public double	getTimeStep()
public double	getWarmstartingFactor()
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public void	setDamping(double value)
public void	setErp(double value)
public void	setErp2(double value)
public void	setFriction(double value)
public void	setGlobalCfm(double value)
public void	setLinearSlop(double value)
public void	setMaxErrorReduction(double value)
public void	setMaxGyroscopicForce(double value)
public void	setMinimumSolverBatchSize(int value)
public void	setNumIterations(int value)
public void	setPadding(String value)
public void	setRestingContactRestitutionThreshold(int value)
public void	setRestitution(double value)
public void	setSingleAxisRollingFrictionThreshold(double value)
public void	setSolverMode(int value)
public void	setSor(double value)
public void	setSplitImpulse(int value)
public void	setSplitImpulsePenetrationThreshold(double value)
public void	setSplitImpulseTurnErp(double value)
public void	setTau(double value)
public void	setTimeStep(double value)
public void	setWarmstartingFactor(double value)

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: construct destroy dispose equals getCPointer hashCode hasOwnership isDisposed isObtained obtain release releaseOwnership takeOwnership toString

swigCPtr	back to summary
private long swigCPtr

btContactSolverInfoDoubleData	back to summary
protected btContactSolverInfoDoubleData(final String className, long cPtr, boolean cMemoryOwn)

btContactSolverInfoDoubleData	back to summary
public btContactSolverInfoDoubleData(long cPtr, boolean cMemoryOwn) Construct a new btContactSolverInfoDoubleData, normally you should not need this constructor it's intended for low-level usage.

btContactSolverInfoDoubleData	back to summary
public btContactSolverInfoDoubleData()

Method Detail

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getCPtr	back to summary
public static long getCPtr(btContactSolverInfoDoubleData obj)

getDamping	back to summary
public double getDamping()

getErp	back to summary
public double getErp()

getErp2	back to summary
public double getErp2()

getFriction	back to summary
public double getFriction()

getGlobalCfm	back to summary
public double getGlobalCfm()

getLinearSlop	back to summary
public double getLinearSlop()

getMaxErrorReduction	back to summary
public double getMaxErrorReduction()

getMaxGyroscopicForce	back to summary
public double getMaxGyroscopicForce()

getMinimumSolverBatchSize	back to summary
public int getMinimumSolverBatchSize()

getNumIterations	back to summary
public int getNumIterations()

getPadding	back to summary
public String getPadding()

getRestingContactRestitutionThreshold	back to summary
public int getRestingContactRestitutionThreshold()

getRestitution	back to summary
public double getRestitution()

getSingleAxisRollingFrictionThreshold	back to summary
public double getSingleAxisRollingFrictionThreshold()

getSolverMode	back to summary
public int getSolverMode()

getSor	back to summary
public double getSor()

getSplitImpulse	back to summary
public int getSplitImpulse()

getSplitImpulsePenetrationThreshold	back to summary
public double getSplitImpulsePenetrationThreshold()

getSplitImpulseTurnErp	back to summary
public double getSplitImpulseTurnErp()

getTau	back to summary
public double getTau()

getTimeStep	back to summary
public double getTimeStep()

getWarmstartingFactor	back to summary
public double getWarmstartingFactor()

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

setDamping	back to summary
public void setDamping(double value)

setErp	back to summary
public void setErp(double value)

setErp2	back to summary
public void setErp2(double value)

setFriction	back to summary
public void setFriction(double value)

setGlobalCfm	back to summary
public void setGlobalCfm(double value)

setLinearSlop	back to summary
public void setLinearSlop(double value)

setMaxErrorReduction	back to summary
public void setMaxErrorReduction(double value)

setMaxGyroscopicForce	back to summary
public void setMaxGyroscopicForce(double value)

setMinimumSolverBatchSize	back to summary
public void setMinimumSolverBatchSize(int value)

setNumIterations	back to summary
public void setNumIterations(int value)

setPadding	back to summary
public void setPadding(String value)

setRestingContactRestitutionThreshold	back to summary
public void setRestingContactRestitutionThreshold(int value)

setRestitution	back to summary
public void setRestitution(double value)

setSingleAxisRollingFrictionThreshold	back to summary
public void setSingleAxisRollingFrictionThreshold(double value)

setSolverMode	back to summary
public void setSolverMode(int value)

setSor	back to summary
public void setSor(double value)

setSplitImpulse	back to summary
public void setSplitImpulse(int value)

setSplitImpulsePenetrationThreshold	back to summary
public void setSplitImpulsePenetrationThreshold(double value)

setSplitImpulseTurnErp	back to summary
public void setSplitImpulseTurnErp(double value)

setTau	back to summary
public void setTau(double value)

setTimeStep	back to summary
public void setTimeStep(double value)

setWarmstartingFactor	back to summary
public void setWarmstartingFactor(double value)

public Class btContactSolverInfoDoubleData

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail