libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.dynamics.btGeneric6DofSpring2ConstraintDoubleData2

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	btGeneric6DofSpring2ConstraintDoubleData2(final String className, long cPtr, boolean cMemoryOwn)
public	btGeneric6DofSpring2ConstraintDoubleData2(long cPtr, boolean cMemoryOwn) Construct a new btGeneric6DofSpring2ConstraintDoubleData2, normally you should not need this constructor it's intended for low-level usage.
public	btGeneric6DofSpring2ConstraintDoubleData2()

Modifier and Type	Method and Description
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public btVector3DoubleData	getAngularBounce()
public String	getAngularEnableMotor()
public String	getAngularEnableSpring()
public btVector3DoubleData	getAngularEquilibriumPoint()
public btVector3DoubleData	getAngularLowerLimit()
public btVector3DoubleData	getAngularMaxMotorForce()
public btVector3DoubleData	getAngularMotorCFM()
public btVector3DoubleData	getAngularMotorERP()
public String	getAngularServoMotor()
public btVector3DoubleData	getAngularServoTarget()
public btVector3DoubleData	getAngularSpringDamping()
public String	getAngularSpringDampingLimited()
public btVector3DoubleData	getAngularSpringStiffness()
public String	getAngularSpringStiffnessLimited()
public btVector3DoubleData	getAngularStopCFM()
public btVector3DoubleData	getAngularStopERP()
public btVector3DoubleData	getAngularTargetVelocity()
public btVector3DoubleData	getAngularUpperLimit()
public static long	getCPtr(btGeneric6DofSpring2ConstraintDoubleData2 obj)
public btVector3DoubleData	getLinearBounce()
public String	getLinearEnableMotor()
public String	getLinearEnableSpring()
public btVector3DoubleData	getLinearEquilibriumPoint()
public btVector3DoubleData	getLinearLowerLimit()
public btVector3DoubleData	getLinearMaxMotorForce()
public btVector3DoubleData	getLinearMotorCFM()
public btVector3DoubleData	getLinearMotorERP()
public String	getLinearServoMotor()
public btVector3DoubleData	getLinearServoTarget()
public btVector3DoubleData	getLinearSpringDamping()
public String	getLinearSpringDampingLimited()
public btVector3DoubleData	getLinearSpringStiffness()
public String	getLinearSpringStiffnessLimited()
public btVector3DoubleData	getLinearStopCFM()
public btVector3DoubleData	getLinearStopERP()
public btVector3DoubleData	getLinearTargetVelocity()
public btVector3DoubleData	getLinearUpperLimit()
public String	getPadding1()
public btTransformDoubleData	getRbAFrame()
public btTransformDoubleData	getRbBFrame()
public int	getRotateOrder()
public btTypedConstraintDoubleData	getTypeConstraintData()
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public void	setAngularBounce(btVector3DoubleData value)
public void	setAngularEnableMotor(String value)
public void	setAngularEnableSpring(String value)
public void	setAngularEquilibriumPoint(btVector3DoubleData value)
public void	setAngularLowerLimit(btVector3DoubleData value)
public void	setAngularMaxMotorForce(btVector3DoubleData value)
public void	setAngularMotorCFM(btVector3DoubleData value)
public void	setAngularMotorERP(btVector3DoubleData value)
public void	setAngularServoMotor(String value)
public void	setAngularServoTarget(btVector3DoubleData value)
public void	setAngularSpringDamping(btVector3DoubleData value)
public void	setAngularSpringDampingLimited(String value)
public void	setAngularSpringStiffness(btVector3DoubleData value)
public void	setAngularSpringStiffnessLimited(String value)
public void	setAngularStopCFM(btVector3DoubleData value)
public void	setAngularStopERP(btVector3DoubleData value)
public void	setAngularTargetVelocity(btVector3DoubleData value)
public void	setAngularUpperLimit(btVector3DoubleData value)
public void	setLinearBounce(btVector3DoubleData value)
public void	setLinearEnableMotor(String value)
public void	setLinearEnableSpring(String value)
public void	setLinearEquilibriumPoint(btVector3DoubleData value)
public void	setLinearLowerLimit(btVector3DoubleData value)
public void	setLinearMaxMotorForce(btVector3DoubleData value)
public void	setLinearMotorCFM(btVector3DoubleData value)
public void	setLinearMotorERP(btVector3DoubleData value)
public void	setLinearServoMotor(String value)
public void	setLinearServoTarget(btVector3DoubleData value)
public void	setLinearSpringDamping(btVector3DoubleData value)
public void	setLinearSpringDampingLimited(String value)
public void	setLinearSpringStiffness(btVector3DoubleData value)
public void	setLinearSpringStiffnessLimited(String value)
public void	setLinearStopCFM(btVector3DoubleData value)
public void	setLinearStopERP(btVector3DoubleData value)
public void	setLinearTargetVelocity(btVector3DoubleData value)
public void	setLinearUpperLimit(btVector3DoubleData value)
public void	setPadding1(String value)
public void	setRbAFrame(btTransformDoubleData value)
public void	setRbBFrame(btTransformDoubleData value)
public void	setRotateOrder(int value)
public void	setTypeConstraintData(btTypedConstraintDoubleData value)

swigCPtr	back to summary
private long swigCPtr

btGeneric6DofSpring2ConstraintDoubleData2	back to summary
protected btGeneric6DofSpring2ConstraintDoubleData2(final String className, long cPtr, boolean cMemoryOwn)

btGeneric6DofSpring2ConstraintDoubleData2	back to summary
public btGeneric6DofSpring2ConstraintDoubleData2(long cPtr, boolean cMemoryOwn) Construct a new btGeneric6DofSpring2ConstraintDoubleData2, normally you should not need this constructor it's intended for low-level usage.

btGeneric6DofSpring2ConstraintDoubleData2	back to summary
public btGeneric6DofSpring2ConstraintDoubleData2()

Method Detail

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getAngularBounce	back to summary
public btVector3DoubleData getAngularBounce()

getAngularEnableMotor	back to summary
public String getAngularEnableMotor()

getAngularEnableSpring	back to summary
public String getAngularEnableSpring()

getAngularEquilibriumPoint	back to summary
public btVector3DoubleData getAngularEquilibriumPoint()

getAngularLowerLimit	back to summary
public btVector3DoubleData getAngularLowerLimit()

getAngularMaxMotorForce	back to summary
public btVector3DoubleData getAngularMaxMotorForce()

getAngularMotorCFM	back to summary
public btVector3DoubleData getAngularMotorCFM()

getAngularMotorERP	back to summary
public btVector3DoubleData getAngularMotorERP()

getAngularServoMotor	back to summary
public String getAngularServoMotor()

getAngularServoTarget	back to summary
public btVector3DoubleData getAngularServoTarget()

getAngularSpringDamping	back to summary
public btVector3DoubleData getAngularSpringDamping()

getAngularSpringDampingLimited	back to summary
public String getAngularSpringDampingLimited()

getAngularSpringStiffness	back to summary
public btVector3DoubleData getAngularSpringStiffness()

getAngularSpringStiffnessLimited	back to summary
public String getAngularSpringStiffnessLimited()

getAngularStopCFM	back to summary
public btVector3DoubleData getAngularStopCFM()

getAngularStopERP	back to summary
public btVector3DoubleData getAngularStopERP()

getAngularTargetVelocity	back to summary
public btVector3DoubleData getAngularTargetVelocity()

getAngularUpperLimit	back to summary
public btVector3DoubleData getAngularUpperLimit()

getCPtr	back to summary
public static long getCPtr(btGeneric6DofSpring2ConstraintDoubleData2 obj)

getLinearBounce	back to summary
public btVector3DoubleData getLinearBounce()

getLinearEnableMotor	back to summary
public String getLinearEnableMotor()

getLinearEnableSpring	back to summary
public String getLinearEnableSpring()

getLinearEquilibriumPoint	back to summary
public btVector3DoubleData getLinearEquilibriumPoint()

getLinearLowerLimit	back to summary
public btVector3DoubleData getLinearLowerLimit()

getLinearMaxMotorForce	back to summary
public btVector3DoubleData getLinearMaxMotorForce()

getLinearMotorCFM	back to summary
public btVector3DoubleData getLinearMotorCFM()

getLinearMotorERP	back to summary
public btVector3DoubleData getLinearMotorERP()

getLinearServoMotor	back to summary
public String getLinearServoMotor()

getLinearServoTarget	back to summary
public btVector3DoubleData getLinearServoTarget()

getLinearSpringDamping	back to summary
public btVector3DoubleData getLinearSpringDamping()

getLinearSpringDampingLimited	back to summary
public String getLinearSpringDampingLimited()

getLinearSpringStiffness	back to summary
public btVector3DoubleData getLinearSpringStiffness()

getLinearSpringStiffnessLimited	back to summary
public String getLinearSpringStiffnessLimited()

getLinearStopCFM	back to summary
public btVector3DoubleData getLinearStopCFM()

getLinearStopERP	back to summary
public btVector3DoubleData getLinearStopERP()

getLinearTargetVelocity	back to summary
public btVector3DoubleData getLinearTargetVelocity()

getLinearUpperLimit	back to summary
public btVector3DoubleData getLinearUpperLimit()

getPadding1	back to summary
public String getPadding1()

getRbAFrame	back to summary
public btTransformDoubleData getRbAFrame()

getRbBFrame	back to summary
public btTransformDoubleData getRbBFrame()

getRotateOrder	back to summary
public int getRotateOrder()

getTypeConstraintData	back to summary
public btTypedConstraintDoubleData getTypeConstraintData()

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

setAngularBounce	back to summary
public void setAngularBounce(btVector3DoubleData value)

setAngularEnableMotor	back to summary
public void setAngularEnableMotor(String value)

setAngularEnableSpring	back to summary
public void setAngularEnableSpring(String value)

setAngularEquilibriumPoint	back to summary
public void setAngularEquilibriumPoint(btVector3DoubleData value)

setAngularLowerLimit	back to summary
public void setAngularLowerLimit(btVector3DoubleData value)

setAngularMaxMotorForce	back to summary
public void setAngularMaxMotorForce(btVector3DoubleData value)

setAngularMotorCFM	back to summary
public void setAngularMotorCFM(btVector3DoubleData value)

setAngularMotorERP	back to summary
public void setAngularMotorERP(btVector3DoubleData value)

setAngularServoMotor	back to summary
public void setAngularServoMotor(String value)

setAngularServoTarget	back to summary
public void setAngularServoTarget(btVector3DoubleData value)

setAngularSpringDamping	back to summary
public void setAngularSpringDamping(btVector3DoubleData value)

setAngularSpringDampingLimited	back to summary
public void setAngularSpringDampingLimited(String value)

setAngularSpringStiffness	back to summary
public void setAngularSpringStiffness(btVector3DoubleData value)

setAngularSpringStiffnessLimited	back to summary
public void setAngularSpringStiffnessLimited(String value)

setAngularStopCFM	back to summary
public void setAngularStopCFM(btVector3DoubleData value)

setAngularStopERP	back to summary
public void setAngularStopERP(btVector3DoubleData value)

setAngularTargetVelocity	back to summary
public void setAngularTargetVelocity(btVector3DoubleData value)

setAngularUpperLimit	back to summary
public void setAngularUpperLimit(btVector3DoubleData value)

setLinearBounce	back to summary
public void setLinearBounce(btVector3DoubleData value)

setLinearEnableMotor	back to summary
public void setLinearEnableMotor(String value)

setLinearEnableSpring	back to summary
public void setLinearEnableSpring(String value)

setLinearEquilibriumPoint	back to summary
public void setLinearEquilibriumPoint(btVector3DoubleData value)

setLinearLowerLimit	back to summary
public void setLinearLowerLimit(btVector3DoubleData value)

setLinearMaxMotorForce	back to summary
public void setLinearMaxMotorForce(btVector3DoubleData value)

setLinearMotorCFM	back to summary
public void setLinearMotorCFM(btVector3DoubleData value)

setLinearMotorERP	back to summary
public void setLinearMotorERP(btVector3DoubleData value)

setLinearServoMotor	back to summary
public void setLinearServoMotor(String value)

setLinearServoTarget	back to summary
public void setLinearServoTarget(btVector3DoubleData value)

setLinearSpringDamping	back to summary
public void setLinearSpringDamping(btVector3DoubleData value)

setLinearSpringDampingLimited	back to summary
public void setLinearSpringDampingLimited(String value)

setLinearSpringStiffness	back to summary
public void setLinearSpringStiffness(btVector3DoubleData value)

setLinearSpringStiffnessLimited	back to summary
public void setLinearSpringStiffnessLimited(String value)

setLinearStopCFM	back to summary
public void setLinearStopCFM(btVector3DoubleData value)

setLinearStopERP	back to summary
public void setLinearStopERP(btVector3DoubleData value)

setLinearTargetVelocity	back to summary
public void setLinearTargetVelocity(btVector3DoubleData value)

setLinearUpperLimit	back to summary
public void setLinearUpperLimit(btVector3DoubleData value)

setPadding1	back to summary
public void setPadding1(String value)

setRbAFrame	back to summary
public void setRbAFrame(btTransformDoubleData value)

setRbBFrame	back to summary
public void setRbBFrame(btTransformDoubleData value)

setRotateOrder	back to summary
public void setRotateOrder(int value)

setTypeConstraintData	back to summary
public void setTypeConstraintData(btTypedConstraintDoubleData value)

public Class btGeneric6DofSpring2ConstraintDoubleData2

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail