libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.collision.GIM_TRIANGLE

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	GIM_TRIANGLE(final String className, long cPtr, boolean cMemoryOwn)
public	GIM_TRIANGLE(long cPtr, boolean cMemoryOwn) Construct a new GIM_TRIANGLE, normally you should not need this constructor it's intended for low-level usage.
public	GIM_TRIANGLE()

Method Summary

Modifier and Type	Method and Description
public void	apply_transform(Matrix4 trans)
public boolean	collide_triangle(GIM_TRIANGLE other, GIM_TRIANGLE_CONTACT_DATA contact_data)
public boolean	collide_triangle_hard_test(GIM_TRIANGLE other, GIM_TRIANGLE_CONTACT_DATA contact_data)
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public GIM_AABB	get_box()
public void	get_edge_plane(long edge_index, Vector3 triangle_normal, btVector4 plane)
public void	get_normal(Vector3 normal)
public void	get_plane(btVector4 plane)
public void	get_triangle_transform(Matrix4 triangle_transform)
public boolean	get_uv_parameters(Vector3 point, Vector3 tri_plane, SWIGTYPE_p_float u, SWIGTYPE_p_float v)
public static long	getCPtr(GIM_TRIANGLE obj)
public float	getMargin()
public btVector3	getVertices()
public boolean	is_point_inside(Vector3 point, Vector3 tri_normal)
public boolean	ray_collision(Vector3 vPoint, Vector3 vDir, Vector3 pout, Vector3 triangle_normal, SWIGTYPE_p_float tparam, float tmax)
public boolean	ray_collision(Vector3 vPoint, Vector3 vDir, Vector3 pout, Vector3 triangle_normal, SWIGTYPE_p_float tparam)
public boolean	ray_collision_front_side(Vector3 vPoint, Vector3 vDir, Vector3 pout, Vector3 triangle_normal, SWIGTYPE_p_float tparam, float tmax)
public boolean	ray_collision_front_side(Vector3 vPoint, Vector3 vDir, Vector3 pout, Vector3 triangle_normal, SWIGTYPE_p_float tparam)
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public void	setMargin(float value)
public void	setVertices(btVector3 value)

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: construct destroy dispose equals getCPointer hashCode hasOwnership isDisposed isObtained obtain release releaseOwnership takeOwnership toString

swigCPtr	back to summary
private long swigCPtr

GIM_TRIANGLE	back to summary
protected GIM_TRIANGLE(final String className, long cPtr, boolean cMemoryOwn)

GIM_TRIANGLE	back to summary
public GIM_TRIANGLE(long cPtr, boolean cMemoryOwn) Construct a new GIM_TRIANGLE, normally you should not need this constructor it's intended for low-level usage.

GIM_TRIANGLE	back to summary
public GIM_TRIANGLE()

Method Detail

apply_transform	back to summary
public void apply_transform(Matrix4 trans)

collide_triangle	back to summary
public boolean collide_triangle(GIM_TRIANGLE other, GIM_TRIANGLE_CONTACT_DATA contact_data)

collide_triangle_hard_test	back to summary
public boolean collide_triangle_hard_test(GIM_TRIANGLE other, GIM_TRIANGLE_CONTACT_DATA contact_data)

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

get_box	back to summary
public GIM_AABB get_box()

get_edge_plane	back to summary
public void get_edge_plane(long edge_index, Vector3 triangle_normal, btVector4 plane)

get_normal	back to summary
public void get_normal(Vector3 normal)

get_plane	back to summary
public void get_plane(btVector4 plane)

get_triangle_transform	back to summary
public void get_triangle_transform(Matrix4 triangle_transform)

get_uv_parameters	back to summary
public boolean get_uv_parameters(Vector3 point, Vector3 tri_plane, SWIGTYPE_p_float u, SWIGTYPE_p_float v)

getCPtr	back to summary
public static long getCPtr(GIM_TRIANGLE obj)

getMargin	back to summary
public float getMargin()

getVertices	back to summary
public btVector3 getVertices()

is_point_inside	back to summary
public boolean is_point_inside(Vector3 point, Vector3 tri_normal)

ray_collision	back to summary
public boolean ray_collision(Vector3 vPoint, Vector3 vDir, Vector3 pout, Vector3 triangle_normal, SWIGTYPE_p_float tparam, float tmax)

ray_collision	back to summary
public boolean ray_collision(Vector3 vPoint, Vector3 vDir, Vector3 pout, Vector3 triangle_normal, SWIGTYPE_p_float tparam)

ray_collision_front_side	back to summary
public boolean ray_collision_front_side(Vector3 vPoint, Vector3 vDir, Vector3 pout, Vector3 triangle_normal, SWIGTYPE_p_float tparam, float tmax)

ray_collision_front_side	back to summary
public boolean ray_collision_front_side(Vector3 vPoint, Vector3 vDir, Vector3 pout, Vector3 triangle_normal, SWIGTYPE_p_float tparam)

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

setMargin	back to summary
public void setMargin(float value)

setVertices	back to summary
public void setVertices(btVector3 value)

public Class GIM_TRIANGLE

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail