libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.collision.btBroadphasePairArray

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	btBroadphasePairArray(final String className, long cPtr, boolean cMemoryOwn)
public	btBroadphasePairArray(long cPtr, boolean cMemoryOwn) Construct a new btBroadphasePairArray, normally you should not need this constructor it's intended for low-level usage.
public	btBroadphasePairArray()

Method Summary

Modifier and Type	Method and Description
public btBroadphasePair	at(int n)
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public Array<btCollisionObject>	getCollisionObjects(final Array<btCollisionObject> The array to fill with collision objects out, final btCollisionObject The collision object the pair must contain (which itself is excluded from the result) other, final int[] A temporary array used by the method, not more object than the length of this array are added tempArray) Returns: The array specified by out
public int	getCollisionObjects(int[] result, int max, int other)
public int	Returns: The amount of user values set in the out array. getCollisionObjectsValue(final int[] The array to fill with the user values out, final btCollisionObject The collision object the pair must contain (which itself is excluded from the result) other) Fills the given array with user value set using `btCollisionObject#setUserValue(int)` of the collision objects within this pair array colliding with the given collision object.
public int	getCollisionObjectsValue(int[] result, int max, int other)
public static long	getCPtr(btBroadphasePairArray obj)
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public int	size()

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: construct destroy dispose equals getCPointer hashCode hasOwnership isDisposed isObtained obtain release releaseOwnership takeOwnership toString

swigCPtr	back to summary
private long swigCPtr

btBroadphasePairArray	back to summary
protected btBroadphasePairArray(final String className, long cPtr, boolean cMemoryOwn)

btBroadphasePairArray	back to summary
public btBroadphasePairArray(long cPtr, boolean cMemoryOwn) Construct a new btBroadphasePairArray, normally you should not need this constructor it's intended for low-level usage.

btBroadphasePairArray	back to summary
public btBroadphasePairArray()

Method Detail

at	back to summary
public btBroadphasePair at(int n)

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getCollisionObjects	back to summary
public Array<btCollisionObject> getCollisionObjects(final Array<btCollisionObject> out, final btCollisionObject other, final int[] tempArray) Parameters out:Array<btCollisionObject> The array to fill with collision objects other:btCollisionObject The collision object the pair must contain (which itself is excluded from the result) tempArray:int[] A temporary array used by the method, not more object than the length of this array are added Returns:Array<btCollisionObject> The array specified by out

getCollisionObjects

back to summary

public Array<btCollisionObject> getCollisionObjects(final Array<btCollisionObject> out, final btCollisionObject other, final int[] tempArray)

Parameters

out:Array<btCollisionObject>: The array to fill with collision objects
other:btCollisionObject: The collision object the pair must contain (which itself is excluded from the result)
tempArray:int[]: A temporary array used by the method, not more object than the length of this array are added

Returns:Array<btCollisionObject>

The array specified by out

getCollisionObjects	back to summary
public int getCollisionObjects(int[] result, int max, int other)

getCollisionObjectsValue back to summary

getCollisionObjectsValue	back to summary
public int getCollisionObjectsValue(final int[] out, final btCollisionObject other) Fills the given array with user value set using `btCollisionObject#setUserValue(int)` of the collision objects within this pair array colliding with the given collision object. Parameters out:int[] The array to fill with the user values other:btCollisionObject The collision object the pair must contain (which itself is excluded from the result) Returns:int The amount of user values set in the out array.

public int getCollisionObjectsValue(final int[] out, final btCollisionObject other)

Fills the given array with user value set using btCollisionObject#setUserValue(int) of the collision objects within this pair array colliding with the given collision object.

Parameters

out:int[]: The array to fill with the user values
other:btCollisionObject: The collision object the pair must contain (which itself is excluded from the result)

Returns:int

The amount of user values set in the out array.

getCollisionObjectsValue	back to summary
public int getCollisionObjectsValue(int[] result, int max, int other)

getCPtr	back to summary
public static long getCPtr(btBroadphasePairArray obj)

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

size	back to summary
public int size()

public Class btBroadphasePairArray

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail