libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.collision.btCollisionShape

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	btCollisionShape(final String className, long cPtr, boolean cMemoryOwn)
public	btCollisionShape(long cPtr, boolean cMemoryOwn) Construct a new btCollisionShape, normally you should not need this constructor it's intended for low-level usage.

Method Summary

Modifier and Type	Method and Description
public void	calculateLocalInertia(float mass, Vector3 inertia)
public int	calculateSerializeBufferSize()
public void	calculateTemporalAabb(Matrix4 curTrans, Vector3 linvel, Vector3 angvel, float timeStep, Vector3 temporalAabbMin, Vector3 temporalAabbMax)
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public void	getAabb(Matrix4 t, Vector3 aabbMin, Vector3 aabbMax)
public float	getAngularMotionDisc()
public Vector3	getAnisotropicRollingFrictionDirection()
public void	getBoundingSphere(Vector3 center, SWIGTYPE_p_float radius)
public float	getContactBreakingThreshold(float defaultContactThresholdFactor)
public static long	getCPtr(btCollisionShape obj)
public Vector3	getLocalScaling()
public float	getMargin()
public String	getName()
public int	getShapeType()
public int	getUserIndex()
public long	getUserPointer()
public boolean	isCompound()
public boolean	isConcave()
public boolean	isConvex()
public boolean	isConvex2d()
public boolean	isInfinite()
public boolean	isNonMoving()
public boolean	isPolyhedral()
public boolean	isSoftBody()
public static btCollisionShape	newDerivedObject(long swigCPtr, boolean owner)
public void	operatorDelete(long ptr)
public void	operatorDelete(long arg0, long arg1)
public void	operatorDeleteArray(long ptr)
public void	operatorDeleteArray(long arg0, long arg1)
public long	operatorNew(long sizeInBytes)
public long	operatorNew(long arg0, long ptr)
public long	operatorNewArray(long sizeInBytes)
public long	operatorNewArray(long arg0, long ptr)
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public String	serialize(long dataBuffer, btSerializer serializer)
public void	serializeSingleShape(btSerializer serializer)
public void	setLocalScaling(Vector3 scaling)
public void	setMargin(float margin)
public void	setUserIndex(int index)
public void	setUserPointer(long userPtr)

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: construct destroy dispose equals getCPointer hashCode hasOwnership isDisposed isObtained obtain release releaseOwnership takeOwnership toString

swigCPtr	back to summary
private long swigCPtr

btCollisionShape	back to summary
protected btCollisionShape(final String className, long cPtr, boolean cMemoryOwn)

btCollisionShape	back to summary
public btCollisionShape(long cPtr, boolean cMemoryOwn) Construct a new btCollisionShape, normally you should not need this constructor it's intended for low-level usage.

Method Detail

calculateLocalInertia	back to summary
public void calculateLocalInertia(float mass, Vector3 inertia)

calculateSerializeBufferSize	back to summary
public int calculateSerializeBufferSize()

calculateTemporalAabb	back to summary
public void calculateTemporalAabb(Matrix4 curTrans, Vector3 linvel, Vector3 angvel, float timeStep, Vector3 temporalAabbMin, Vector3 temporalAabbMax)

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getAabb	back to summary
public void getAabb(Matrix4 t, Vector3 aabbMin, Vector3 aabbMax)

getAngularMotionDisc	back to summary
public float getAngularMotionDisc()

getAnisotropicRollingFrictionDirection	back to summary
public Vector3 getAnisotropicRollingFrictionDirection()

getBoundingSphere	back to summary
public void getBoundingSphere(Vector3 center, SWIGTYPE_p_float radius)

getContactBreakingThreshold	back to summary
public float getContactBreakingThreshold(float defaultContactThresholdFactor)

getCPtr	back to summary
public static long getCPtr(btCollisionShape obj)

getLocalScaling	back to summary
public Vector3 getLocalScaling()

getMargin	back to summary
public float getMargin()

getName	back to summary
public String getName()

getShapeType	back to summary
public int getShapeType()

getUserIndex	back to summary
public int getUserIndex()

getUserPointer	back to summary
public long getUserPointer()

isCompound	back to summary
public boolean isCompound()

isConcave	back to summary
public boolean isConcave()

isConvex	back to summary
public boolean isConvex()

isConvex2d	back to summary
public boolean isConvex2d()

isInfinite	back to summary
public boolean isInfinite()

isNonMoving	back to summary
public boolean isNonMoving()

isPolyhedral	back to summary
public boolean isPolyhedral()

isSoftBody	back to summary
public boolean isSoftBody()

newDerivedObject	back to summary
public static btCollisionShape newDerivedObject(long swigCPtr, boolean owner)

operatorDelete	back to summary
public void operatorDelete(long ptr)

operatorDelete	back to summary
public void operatorDelete(long arg0, long arg1)

operatorDeleteArray	back to summary
public void operatorDeleteArray(long ptr)

operatorDeleteArray	back to summary
public void operatorDeleteArray(long arg0, long arg1)

operatorNew	back to summary
public long operatorNew(long sizeInBytes)

operatorNew	back to summary
public long operatorNew(long arg0, long ptr)

operatorNewArray	back to summary
public long operatorNewArray(long sizeInBytes)

operatorNewArray	back to summary
public long operatorNewArray(long arg0, long ptr)

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

serialize	back to summary
public String serialize(long dataBuffer, btSerializer serializer)

serializeSingleShape	back to summary
public void serializeSingleShape(btSerializer serializer)

setLocalScaling	back to summary
public void setLocalScaling(Vector3 scaling)

setMargin	back to summary
public void setMargin(float margin)

setUserIndex	back to summary
public void setUserIndex(int index)

setUserPointer	back to summary
public void setUserPointer(long userPtr)

public Class btCollisionShape

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail