libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.collision.btConvexPolyhedron

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	btConvexPolyhedron(final String className, long cPtr, boolean cMemoryOwn)
public	btConvexPolyhedron(long cPtr, boolean cMemoryOwn) Construct a new btConvexPolyhedron, normally you should not need this constructor it's intended for low-level usage.
public	btConvexPolyhedron()

Method Summary

Modifier and Type	Method and Description
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public static long	getCPtr(btConvexPolyhedron obj)
public btVector3	getExtents()
public SWIGTYPE_p_btAlignedObjectArrayT_btFace_t	getFaces()
public btVector3	getLocalCenter()
public btVector3	getMC()
public btVector3	getME()
public float	getRadius()
public btVector3Array	getUniqueEdges()
public btVector3Array	getVertices()
public void	initialize()
public void	operatorDelete(long ptr)
public void	operatorDelete(long arg0, long arg1)
public void	operatorDeleteArray(long ptr)
public void	operatorDeleteArray(long arg0, long arg1)
public long	operatorNew(long sizeInBytes)
public long	operatorNew(long arg0, long ptr)
public long	operatorNewArray(long sizeInBytes)
public long	operatorNewArray(long arg0, long ptr)
public void	project(Matrix4 trans, Vector3 dir, SWIGTYPE_p_float minProj, SWIGTYPE_p_float maxProj, Vector3 witnesPtMin, Vector3 witnesPtMax)
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public void	setExtents(btVector3 value)
public void	setFaces(SWIGTYPE_p_btAlignedObjectArrayT_btFace_t value)
public void	setLocalCenter(btVector3 value)
public void	setMC(btVector3 value)
public void	setME(btVector3 value)
public void	setRadius(float value)
public void	setUniqueEdges(btVector3Array value)
public void	setVertices(btVector3Array value)
public boolean	testContainment()

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: construct destroy dispose equals getCPointer hashCode hasOwnership isDisposed isObtained obtain release releaseOwnership takeOwnership toString

swigCPtr	back to summary
private long swigCPtr

btConvexPolyhedron	back to summary
protected btConvexPolyhedron(final String className, long cPtr, boolean cMemoryOwn)

btConvexPolyhedron	back to summary
public btConvexPolyhedron(long cPtr, boolean cMemoryOwn) Construct a new btConvexPolyhedron, normally you should not need this constructor it's intended for low-level usage.

btConvexPolyhedron	back to summary
public btConvexPolyhedron()

Method Detail

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getCPtr	back to summary
public static long getCPtr(btConvexPolyhedron obj)

getExtents	back to summary
public btVector3 getExtents()

getFaces	back to summary
public SWIGTYPE_p_btAlignedObjectArrayT_btFace_t getFaces()

getLocalCenter	back to summary
public btVector3 getLocalCenter()

getMC	back to summary
public btVector3 getMC()

getME	back to summary
public btVector3 getME()

getRadius	back to summary
public float getRadius()

getUniqueEdges	back to summary
public btVector3Array getUniqueEdges()

getVertices	back to summary
public btVector3Array getVertices()

initialize	back to summary
public void initialize()

operatorDelete	back to summary
public void operatorDelete(long ptr)

operatorDelete	back to summary
public void operatorDelete(long arg0, long arg1)

operatorDeleteArray	back to summary
public void operatorDeleteArray(long ptr)

operatorDeleteArray	back to summary
public void operatorDeleteArray(long arg0, long arg1)

operatorNew	back to summary
public long operatorNew(long sizeInBytes)

operatorNew	back to summary
public long operatorNew(long arg0, long ptr)

operatorNewArray	back to summary
public long operatorNewArray(long sizeInBytes)

operatorNewArray	back to summary
public long operatorNewArray(long arg0, long ptr)

project	back to summary
public void project(Matrix4 trans, Vector3 dir, SWIGTYPE_p_float minProj, SWIGTYPE_p_float maxProj, Vector3 witnesPtMin, Vector3 witnesPtMax)

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

setExtents	back to summary
public void setExtents(btVector3 value)

setFaces	back to summary
public void setFaces(SWIGTYPE_p_btAlignedObjectArrayT_btFace_t value)

setLocalCenter	back to summary
public void setLocalCenter(btVector3 value)

setMC	back to summary
public void setMC(btVector3 value)

setME	back to summary
public void setME(btVector3 value)

setRadius	back to summary
public void setRadius(float value)

setUniqueEdges	back to summary
public void setUniqueEdges(btVector3Array value)

setVertices	back to summary
public void setVertices(btVector3Array value)

testContainment	back to summary
public boolean testContainment()

public Class btConvexPolyhedron

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail