libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.collision.btDbvtBroadphase

Modifier and Type	Field and Description
public static final int	DYNAMIC_SET
public static final int	FIXED_SET
public static final int	STAGECOUNT
private long	swigCPtr Hides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.swigCPtr.

Access	Constructor and Description
protected	btDbvtBroadphase(final String className, long cPtr, boolean cMemoryOwn)
public	btDbvtBroadphase(long cPtr, boolean cMemoryOwn) Construct a new btDbvtBroadphase, normally you should not need this constructor it's intended for low-level usage.
public	btDbvtBroadphase(btOverlappingPairCache paircache)
public	btDbvtBroadphase()

Modifier and Type	Method and Description
public static void	benchmark(btBroadphaseInterface arg0)
public void	collide(btDispatcher dispatcher)
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public int	getCid()
public static long	getCPtr(btDbvtBroadphase obj)
public int	getCupdates()
public boolean	getDeferedcollide()
public int	getDupdates()
public int	getFixedleft()
public int	getFupdates()
public int	getGid()
public boolean	getNeedcleanup()
public int	getNewpairs()
public btOverlappingPairCache	getPaircache()
public int	getPid()
public float	getPrediction()
public SWIGTYPE_p_btAlignedObjectArrayT_btAlignedObjectArrayT_btDbvtNode_const_p_t_t	getRayTestStacks()
public boolean	getReleasepaircache()
public btDbvt	getSet(int index)
public btDbvt	getSet0()
public btDbvt	getSet1()
public btDbvt	getSets()
public int	getStageCurrent()
public SWIGTYPE_p_p_btDbvtProxy	getStageRoots()
public long	getUpdates_call()
public long	getUpdates_done()
public float	getUpdates_ratio()
public float	getVelocityPrediction()
public void	optimize()
public void	performDeferredRemoval(btDispatcher dispatcher)
public void	rayTest(Vector3 rayFrom, Vector3 rayTo, btBroadphaseRayCallback rayCallback, Vector3 aabbMin, Vector3 aabbMax) Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.rayTest.
public void	rayTest(Vector3 rayFrom, Vector3 rayTo, btBroadphaseRayCallback rayCallback, Vector3 aabbMin) Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.rayTest.
public void	rayTest(Vector3 rayFrom, Vector3 rayTo, btBroadphaseRayCallback rayCallback) Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.rayTest.
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.reset.
public void	setAabbForceUpdate(btBroadphaseProxy absproxy, Vector3 aabbMin, Vector3 aabbMax, btDispatcher arg3)
public void	setCid(int value)
public void	setCupdates(int value)
public void	setDeferedcollide(boolean value)
public void	setDupdates(int value)
public void	setFixedleft(int value)
public void	setFupdates(int value)
public void	setGid(int value)
public void	setNeedcleanup(boolean value)
public void	setNewpairs(int value)
public void	setPaircache(btOverlappingPairCache value)
public void	setPid(int value)
public void	setPrediction(float value)
public void	setRayTestStacks(SWIGTYPE_p_btAlignedObjectArrayT_btAlignedObjectArrayT_btDbvtNode_const_p_t_t value)
public void	setReleasepaircache(boolean value)
public void	setSets(btDbvt value)
public void	setStageCurrent(int value)
public void	setStageRoots(SWIGTYPE_p_p_btDbvtProxy value)
public void	setUpdates_call(long value)
public void	setUpdates_done(long value)
public void	setUpdates_ratio(float value)
public void	setVelocityPrediction(float prediction)

DYNAMIC_SET	back to summary
public static final int DYNAMIC_SET

FIXED_SET	back to summary
public static final int FIXED_SET

STAGECOUNT	back to summary
public static final int STAGECOUNT

swigCPtr	back to summary
private long swigCPtr Hides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.swigCPtr.

btDbvtBroadphase	back to summary
protected btDbvtBroadphase(final String className, long cPtr, boolean cMemoryOwn)

btDbvtBroadphase	back to summary
public btDbvtBroadphase(long cPtr, boolean cMemoryOwn) Construct a new btDbvtBroadphase, normally you should not need this constructor it's intended for low-level usage.

btDbvtBroadphase	back to summary
public btDbvtBroadphase(btOverlappingPairCache paircache)

btDbvtBroadphase	back to summary
public btDbvtBroadphase()

Method Detail

benchmark	back to summary
public static void benchmark(btBroadphaseInterface arg0)

collide	back to summary
public void collide(btDispatcher dispatcher)

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getCid	back to summary
public int getCid()

getCPtr	back to summary
public static long getCPtr(btDbvtBroadphase obj)

getCupdates	back to summary
public int getCupdates()

getDeferedcollide	back to summary
public boolean getDeferedcollide()

getDupdates	back to summary
public int getDupdates()

getFixedleft	back to summary
public int getFixedleft()

getFupdates	back to summary
public int getFupdates()

getGid	back to summary
public int getGid()

getNeedcleanup	back to summary
public boolean getNeedcleanup()

getNewpairs	back to summary
public int getNewpairs()

getPaircache	back to summary
public btOverlappingPairCache getPaircache()

getPid	back to summary
public int getPid()

getPrediction	back to summary
public float getPrediction()

getRayTestStacks	back to summary
public SWIGTYPE_p_btAlignedObjectArrayT_btAlignedObjectArrayT_btDbvtNode_const_p_t_t getRayTestStacks()

getReleasepaircache	back to summary
public boolean getReleasepaircache()

getSet	back to summary
public btDbvt getSet(int index)

getSet0	back to summary
public btDbvt getSet0()

getSet1	back to summary
public btDbvt getSet1()

getSets	back to summary
public btDbvt getSets()

getStageCurrent	back to summary
public int getStageCurrent()

getStageRoots	back to summary
public SWIGTYPE_p_p_btDbvtProxy getStageRoots()

getUpdates_call	back to summary
public long getUpdates_call()

getUpdates_done	back to summary
public long getUpdates_done()

getUpdates_ratio	back to summary
public float getUpdates_ratio()

getVelocityPrediction	back to summary
public float getVelocityPrediction()

optimize	back to summary
public void optimize()

performDeferredRemoval	back to summary
public void performDeferredRemoval(btDispatcher dispatcher)

rayTest	back to summary
public void rayTest(Vector3 rayFrom, Vector3 rayTo, btBroadphaseRayCallback rayCallback, Vector3 aabbMin, Vector3 aabbMax) Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.rayTest.

rayTest	back to summary
public void rayTest(Vector3 rayFrom, Vector3 rayTo, btBroadphaseRayCallback rayCallback, Vector3 aabbMin) Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.rayTest.

rayTest	back to summary
public void rayTest(Vector3 rayFrom, Vector3 rayTo, btBroadphaseRayCallback rayCallback) Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.rayTest.

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.collision.btBroadphaseInterface.reset.

Annotations

@Override

setAabbForceUpdate	back to summary
public void setAabbForceUpdate(btBroadphaseProxy absproxy, Vector3 aabbMin, Vector3 aabbMax, btDispatcher arg3)

setCid	back to summary
public void setCid(int value)

setCupdates	back to summary
public void setCupdates(int value)

setDeferedcollide	back to summary
public void setDeferedcollide(boolean value)

setDupdates	back to summary
public void setDupdates(int value)

setFixedleft	back to summary
public void setFixedleft(int value)

setFupdates	back to summary
public void setFupdates(int value)

setGid	back to summary
public void setGid(int value)

setNeedcleanup	back to summary
public void setNeedcleanup(boolean value)

setNewpairs	back to summary
public void setNewpairs(int value)

setPaircache	back to summary
public void setPaircache(btOverlappingPairCache value)

setPid	back to summary
public void setPid(int value)

setPrediction	back to summary
public void setPrediction(float value)

setRayTestStacks	back to summary
public void setRayTestStacks(SWIGTYPE_p_btAlignedObjectArrayT_btAlignedObjectArrayT_btDbvtNode_const_p_t_t value)

setReleasepaircache	back to summary
public void setReleasepaircache(boolean value)

setSets	back to summary
public void setSets(btDbvt value)

setStageCurrent	back to summary
public void setStageCurrent(int value)

setStageRoots	back to summary
public void setStageRoots(SWIGTYPE_p_p_btDbvtProxy value)

setUpdates_call	back to summary
public void setUpdates_call(long value)

setUpdates_done	back to summary
public void setUpdates_done(long value)

setUpdates_ratio	back to summary
public void setUpdates_ratio(float value)

setVelocityPrediction	back to summary
public void setVelocityPrediction(float prediction)

public Class btDbvtBroadphase

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail