Nested and Inner Type Summary

Modifier and Type	Class and Description
public static class	btPersistentManifoldArray.less

Field Summary

Modifier and Type	Field and Description
private long	swigCPtr

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: className destroyed swigCMemOwn

Constructor Summary

Access	Constructor and Description
protected	btPersistentManifoldArray(final String className, long cPtr, boolean cMemoryOwn)
public	btPersistentManifoldArray(long cPtr, boolean cMemoryOwn) Construct a new btPersistentManifoldArray, normally you should not need this constructor it's intended for low-level usage.
public	btPersistentManifoldArray()
public	btPersistentManifoldArray(btPersistentManifoldArray otherArray)

Method Summary

Modifier and Type	Method and Description
public SWIGTYPE_p_p_btPersistentManifold	at(int n)
public btPersistentManifold	atConst(int n)
public int	capacity()
public void	clear()
public void	copyFromArray(btPersistentManifoldArray otherArray)
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
public SWIGTYPE_p_p_btPersistentManifold	expand(btPersistentManifold fillValue)
public SWIGTYPE_p_p_btPersistentManifold	expand()
public SWIGTYPE_p_p_btPersistentManifold	expandNonInitializing()
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public int	findBinarySearch(btPersistentManifold key)
public int	findLinearSearch(btPersistentManifold key)
public int	findLinearSearch2(btPersistentManifold key)
public static long	getCPtr(btPersistentManifoldArray obj)
public void	initializeFromBuffer(long buffer, int size, int capacity)
public btPersistentManifoldArray	operatorAssignment(btPersistentManifoldArray other)
public SWIGTYPE_p_p_btPersistentManifold	operatorSubscript(int n)
public btPersistentManifold	operatorSubscriptConst(int n)
public void	pop_back()
public void	push_back(btPersistentManifold _Val)
public void	remove(btPersistentManifold key)
public void	removeAtIndex(int index)
public void	reserve(int _Count)
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public void	resize(int newsize, btPersistentManifold fillData)
public void	resize(int newsize)
public void	resizeNoInitialize(int newsize)
public int	size()
public void	swap(int index0, int index1)

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: construct destroy dispose equals getCPointer hashCode hasOwnership isDisposed isObtained obtain release releaseOwnership takeOwnership toString

swigCPtr	back to summary
private long swigCPtr

Constructor Detail

btPersistentManifoldArray	back to summary
protected btPersistentManifoldArray(final String className, long cPtr, boolean cMemoryOwn)

btPersistentManifoldArray	back to summary
public btPersistentManifoldArray(long cPtr, boolean cMemoryOwn) Construct a new btPersistentManifoldArray, normally you should not need this constructor it's intended for low-level usage.

btPersistentManifoldArray	back to summary
public btPersistentManifoldArray()

btPersistentManifoldArray	back to summary
public btPersistentManifoldArray(btPersistentManifoldArray otherArray)

Method Detail

at	back to summary
public SWIGTYPE_p_p_btPersistentManifold at(int n)

atConst	back to summary
public btPersistentManifold atConst(int n)

capacity	back to summary
public int capacity()

clear	back to summary
public void clear()

copyFromArray	back to summary
public void copyFromArray(btPersistentManifoldArray otherArray)

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

expand	back to summary
public SWIGTYPE_p_p_btPersistentManifold expand(btPersistentManifold fillValue)

expand	back to summary
public SWIGTYPE_p_p_btPersistentManifold expand()

expandNonInitializing	back to summary
public SWIGTYPE_p_p_btPersistentManifold expandNonInitializing()

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

findBinarySearch	back to summary
public int findBinarySearch(btPersistentManifold key)

findLinearSearch	back to summary
public int findLinearSearch(btPersistentManifold key)

findLinearSearch2	back to summary
public int findLinearSearch2(btPersistentManifold key)

getCPtr	back to summary
public static long getCPtr(btPersistentManifoldArray obj)

initializeFromBuffer	back to summary
public void initializeFromBuffer(long buffer, int size, int capacity)

operatorAssignment	back to summary
public btPersistentManifoldArray operatorAssignment(btPersistentManifoldArray other)

operatorSubscript	back to summary
public SWIGTYPE_p_p_btPersistentManifold operatorSubscript(int n)

operatorSubscriptConst	back to summary
public btPersistentManifold operatorSubscriptConst(int n)

pop_back	back to summary
public void pop_back()

push_back	back to summary
public void push_back(btPersistentManifold _Val)

remove	back to summary
public void remove(btPersistentManifold key)

removeAtIndex	back to summary
public void removeAtIndex(int index)

reserve	back to summary
public void reserve(int _Count)

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

resize	back to summary
public void resize(int newsize, btPersistentManifold fillData)

resize	back to summary
public void resize(int newsize)

resizeNoInitialize	back to summary
public void resizeNoInitialize(int newsize)

size	back to summary
public int size()

swap	back to summary
public void swap(int index0, int index1)

com.badlogic.gdx.physics.bullet.collision back to summary

public Class btPersistentManifoldArray.less

Class Inheritance

extends BulletBase

java.lang.Object
com.badlogic.gdx.physics.bullet.BulletBase
com.badlogic.gdx.physics.bullet.collision.btPersistentManifoldArray.less

Field Summary

Modifier and Type	Field and Description
private long	swigCPtr

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: className destroyed swigCMemOwn

Constructor Summary

Access	Constructor and Description
protected	less(final String className, long cPtr, boolean cMemoryOwn)
public	less(long cPtr, boolean cMemoryOwn) Construct a new less, normally you should not need this constructor it's intended for low-level usage.
public	less()

Method Summary

Modifier and Type	Method and Description
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public static long	getCPtr(btPersistentManifoldArray.less obj)
public boolean	operatorFunctionCall(btPersistentManifold a, btPersistentManifold b)
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Inherited from com.badlogic.gdx.physics.bullet.BulletBase:: construct destroy dispose equals getCPointer hashCode hasOwnership isDisposed isObtained obtain release releaseOwnership takeOwnership toString

Field Detail

swigCPtr	back to summary
private long swigCPtr

Constructor Detail

less	back to summary
protected less(final String className, long cPtr, boolean cMemoryOwn)

less	back to summary
public less(long cPtr, boolean cMemoryOwn) Construct a new less, normally you should not need this constructor it's intended for low-level usage.

less	back to summary
public less()

Method Detail

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getCPtr	back to summary
public static long getCPtr(btPersistentManifoldArray.less obj)

operatorFunctionCall	back to summary
public boolean operatorFunctionCall(btPersistentManifold a, btPersistentManifold b)

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override