libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.collision.gim_contact_array_internal

Modifier and Type	Field and Description
private long	swigCPtr

Access	Constructor and Description
protected	gim_contact_array_internal(final String className, long cPtr, boolean cMemoryOwn)
public	gim_contact_array_internal(long cPtr, boolean cMemoryOwn) Construct a new gim_contact_array_internal, normally you should not need this constructor it's intended for low-level usage.
public	gim_contact_array_internal()
public	gim_contact_array_internal(SWIGTYPE_p_GUINT reservesize)

Modifier and Type	Method and Description
public GIM_CONTACT	at(SWIGTYPE_p_GUINT i)
public GIM_CONTACT	at_const(SWIGTYPE_p_GUINT i)
public GIM_CONTACT	back()
public GIM_CONTACT	back_const()
public void	clear()
public void	clear_memory()
public void	clear_range(SWIGTYPE_p_GUINT start_range)
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates.
public void	destroyData()
public void	erase(SWIGTYPE_p_GUINT index)
public void	erase_sorted(SWIGTYPE_p_GUINT index)
public void	erase_sorted_mem(SWIGTYPE_p_GUINT index)
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public GIM_CONTACT	front()
public GIM_CONTACT	front_const()
public GIM_CONTACT	get_pointer_at(SWIGTYPE_p_GUINT i)
public GIM_CONTACT	get_pointer_at_const(SWIGTYPE_p_GUINT i)
public SWIGTYPE_p_GUINT	getAllocated_size()
public static long	getCPtr(gim_contact_array_internal obj)
public GIM_CONTACT	getData()
public SWIGTYPE_p_GUINT	getSize()
public boolean	growingCheck()
public void	insert(GIM_CONTACT obj, SWIGTYPE_p_GUINT index)
public void	insert_mem(SWIGTYPE_p_GUINT index)
public SWIGTYPE_p_GUINT	max_size()
public GIM_CONTACT	operatorSubscript(long i)
public GIM_CONTACT	operatorSubscriptConst(long i)
public GIM_CONTACT	pointer()
public GIM_CONTACT	pointer_const()
public void	pop_back()
public void	pop_back_mem()
public void	push_back(GIM_CONTACT obj)
public void	push_back_mem()
public void	push_back_memcpy(GIM_CONTACT obj)
public void	refit()
public boolean	reserve(SWIGTYPE_p_GUINT size)
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.
public void	resize(SWIGTYPE_p_GUINT size, boolean call_constructor, GIM_CONTACT fillData)
public void	resize(SWIGTYPE_p_GUINT size, boolean call_constructor)
public void	resize(SWIGTYPE_p_GUINT size)
public boolean	resizeData(SWIGTYPE_p_GUINT newsize)
public void	setAllocated_size(SWIGTYPE_p_GUINT value)
public void	setData(GIM_CONTACT value)
public void	setSize(SWIGTYPE_p_GUINT value)
public SWIGTYPE_p_GUINT	sizeVal()
public void	swap(SWIGTYPE_p_GUINT i, SWIGTYPE_p_GUINT j)

swigCPtr	back to summary
private long swigCPtr

gim_contact_array_internal	back to summary
protected gim_contact_array_internal(final String className, long cPtr, boolean cMemoryOwn)

gim_contact_array_internal	back to summary
public gim_contact_array_internal(long cPtr, boolean cMemoryOwn) Construct a new gim_contact_array_internal, normally you should not need this constructor it's intended for low-level usage.

gim_contact_array_internal	back to summary
public gim_contact_array_internal()

gim_contact_array_internal	back to summary
public gim_contact_array_internal(SWIGTYPE_p_GUINT reservesize)

Method Detail

at	back to summary
public GIM_CONTACT at(SWIGTYPE_p_GUINT i)

at_const	back to summary
public GIM_CONTACT at_const(SWIGTYPE_p_GUINT i)

back	back to summary
public GIM_CONTACT back()

back_const	back to summary
public GIM_CONTACT back_const()

clear	back to summary
public void clear()

clear_memory	back to summary
public void clear_memory()

clear_range	back to summary
public void clear_range(SWIGTYPE_p_GUINT start_range)

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.BulletBase.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

destroyData	back to summary
public void destroyData()

erase	back to summary
public void erase(SWIGTYPE_p_GUINT index)

erase_sorted	back to summary
public void erase_sorted(SWIGTYPE_p_GUINT index)

erase_sorted_mem	back to summary
public void erase_sorted_mem(SWIGTYPE_p_GUINT index)

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.BulletBase.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

front	back to summary
public GIM_CONTACT front()

front_const	back to summary
public GIM_CONTACT front_const()

get_pointer_at	back to summary
public GIM_CONTACT get_pointer_at(SWIGTYPE_p_GUINT i)

get_pointer_at_const	back to summary
public GIM_CONTACT get_pointer_at_const(SWIGTYPE_p_GUINT i)

getAllocated_size	back to summary
public SWIGTYPE_p_GUINT getAllocated_size()

getCPtr	back to summary
public static long getCPtr(gim_contact_array_internal obj)

getData	back to summary
public GIM_CONTACT getData()

getSize	back to summary
public SWIGTYPE_p_GUINT getSize()

growingCheck	back to summary
public boolean growingCheck()

insert	back to summary
public void insert(GIM_CONTACT obj, SWIGTYPE_p_GUINT index)

insert_mem	back to summary
public void insert_mem(SWIGTYPE_p_GUINT index)

max_size	back to summary
public SWIGTYPE_p_GUINT max_size()

operatorSubscript	back to summary
public GIM_CONTACT operatorSubscript(long i)

operatorSubscriptConst	back to summary
public GIM_CONTACT operatorSubscriptConst(long i)

pointer	back to summary
public GIM_CONTACT pointer()

pointer_const	back to summary
public GIM_CONTACT pointer_const()

pop_back	back to summary
public void pop_back()

pop_back_mem	back to summary
public void pop_back_mem()

push_back	back to summary
public void push_back(GIM_CONTACT obj)

push_back_mem	back to summary
public void push_back_mem()

push_back_memcpy	back to summary
public void push_back_memcpy(GIM_CONTACT obj)

refit	back to summary
public void refit()

reserve	back to summary
public boolean reserve(SWIGTYPE_p_GUINT size)

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.BulletBase.reset.

Annotations

@Override

resize	back to summary
public void resize(SWIGTYPE_p_GUINT size, boolean call_constructor, GIM_CONTACT fillData)

resize	back to summary
public void resize(SWIGTYPE_p_GUINT size, boolean call_constructor)

resize	back to summary
public void resize(SWIGTYPE_p_GUINT size)

resizeData	back to summary
public boolean resizeData(SWIGTYPE_p_GUINT newsize)

setAllocated_size	back to summary
public void setAllocated_size(SWIGTYPE_p_GUINT value)

setData	back to summary
public void setData(GIM_CONTACT value)

setSize	back to summary
public void setSize(SWIGTYPE_p_GUINT value)

sizeVal	back to summary
public SWIGTYPE_p_GUINT sizeVal()

swap	back to summary
public void swap(SWIGTYPE_p_GUINT i, SWIGTYPE_p_GUINT j)

public Class gim_contact_array_internal

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail