libGDX 1.14.2 · com.badlogic.gdx.physics.bullet.collision.btConvexTriangleCallback

Modifier and Type	Field and Description
private long	swigCPtr Hides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.swigCPtr.

Access	Constructor and Description
protected	btConvexTriangleCallback(final String className, long cPtr, boolean cMemoryOwn)
public	btConvexTriangleCallback(long cPtr, boolean cMemoryOwn) Construct a new btConvexTriangleCallback, normally you should not need this constructor it's intended for low-level usage.
public	btConvexTriangleCallback(btDispatcher dispatcher, btCollisionObjectWrapper body0Wrap, btCollisionObjectWrapper body1Wrap, boolean isSwapped)

Modifier and Type	Method and Description
public void	clearCache()
public void	clearWrapperData()
protected synchronized void	delete() Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.delete. Deletes the bullet object this class encapsulates.
protected void	finalize() Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
public Vector3	getAabbMax()
public Vector3	getAabbMin()
public static long	getCPtr(btConvexTriangleCallback obj)
public btPersistentManifold	getManifoldPtr()
public int	getTriangleCount()
public void	operatorDelete(long ptr)
public void	operatorDelete(long arg0, long arg1)
public void	operatorDeleteArray(long ptr)
public void	operatorDeleteArray(long arg0, long arg1)
public long	operatorNew(long sizeInBytes)
public long	operatorNew(long arg0, long ptr)
public long	operatorNewArray(long sizeInBytes)
public long	operatorNewArray(long arg0, long ptr)
public void	processTriangle(btVector3 triangle, int partId, int triangleIndex) Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.processTriangle.
protected void	reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.reset.
public void	setManifoldPtr(btPersistentManifold value)
public void	setTimeStepAndCounters(float collisionMarginTriangle, btDispatcherInfo dispatchInfo, btCollisionObjectWrapper convexBodyWrap, btCollisionObjectWrapper triBodyWrap, btManifoldResult resultOut)
public void	setTriangleCount(int value)
protected void	swigDirectorDisconnect() Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.swigDirectorDisconnect.
public void	swigReleaseOwnership() Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.swigReleaseOwnership.
public void	swigTakeOwnership() Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.swigTakeOwnership.

swigCPtr	back to summary
private long swigCPtr Hides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.swigCPtr.

btConvexTriangleCallback	back to summary
protected btConvexTriangleCallback(final String className, long cPtr, boolean cMemoryOwn)

btConvexTriangleCallback	back to summary
public btConvexTriangleCallback(long cPtr, boolean cMemoryOwn) Construct a new btConvexTriangleCallback, normally you should not need this constructor it's intended for low-level usage.

btConvexTriangleCallback	back to summary
public btConvexTriangleCallback(btDispatcher dispatcher, btCollisionObjectWrapper body0Wrap, btCollisionObjectWrapper body1Wrap, boolean isSwapped)

Method Detail

clearCache	back to summary
public void clearCache()

clearWrapperData	back to summary
public void clearWrapperData()

delete back to summary

delete	back to summary
protected synchronized void delete() Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.delete. Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete. Deletes the bullet object this class encapsulates. Do not call directly, instead use the `dispose()` method. Annotations @Override

protected synchronized void delete()

Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.delete.

Doc from com.badlogic.gdx.physics.bullet.BulletBase.delete.

Deletes the bullet object this class encapsulates. Do not call directly, instead use the dispose() method.

Annotations

@Override

finalize back to summary

finalize	back to summary
protected void finalize() throws Throwable Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.finalize. Doc from java.lang.Object.finalize. Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the `finalize` method to dispose of system resources or to perform other cleanup. When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call `finalize()`. In a Java virtual machine in which finalization is enabled, the garbage collector might call `finalize` only after an indefinite delay. The general contract of `finalize` is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The `finalize` method may take any action, including making this object available again to other threads; the usual purpose of `finalize`, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded. The `finalize` method of class `Object` performs no special action; it simply returns normally. Subclasses of `Object` may override this definition. The Java programming language does not guarantee which thread will invoke the `finalize` method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates. After the `finalize` method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded. The `finalize` method is never invoked more than once by a Java virtual machine for any given object. Any exception thrown by the `finalize` method causes the finalization of this object to be halted, but is otherwise ignored. Annotations @Override Exceptions Throwable: the `Exception` raised by this method

protected void finalize() throws Throwable

Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.finalize.

Doc from java.lang.Object.finalize.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

When running in a Java virtual machine in which finalization has been disabled or removed, the garbage collector will never call finalize(). In a Java virtual machine in which finalization is enabled, the garbage collector might call finalize only after an indefinite delay.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Annotations

@Override

Exceptions

Throwable:: the Exception raised by this method

getAabbMax	back to summary
public Vector3 getAabbMax()

getAabbMin	back to summary
public Vector3 getAabbMin()

getCPtr	back to summary
public static long getCPtr(btConvexTriangleCallback obj)

getManifoldPtr	back to summary
public btPersistentManifold getManifoldPtr()

getTriangleCount	back to summary
public int getTriangleCount()

operatorDelete	back to summary
public void operatorDelete(long ptr)

operatorDelete	back to summary
public void operatorDelete(long arg0, long arg1)

operatorDeleteArray	back to summary
public void operatorDeleteArray(long ptr)

operatorDeleteArray	back to summary
public void operatorDeleteArray(long arg0, long arg1)

operatorNew	back to summary
public long operatorNew(long sizeInBytes)

operatorNew	back to summary
public long operatorNew(long arg0, long ptr)

operatorNewArray	back to summary
public long operatorNewArray(long sizeInBytes)

operatorNewArray	back to summary
public long operatorNewArray(long arg0, long ptr)

processTriangle	back to summary
public void processTriangle(btVector3 triangle, int partId, int triangleIndex) Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.processTriangle.

reset	back to summary
protected void reset(long cPtr, boolean cMemoryOwn) Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.reset. Annotations @Override

reset

back to summary

protected void reset(long cPtr, boolean cMemoryOwn)

Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.reset.

Annotations

@Override

setManifoldPtr	back to summary
public void setManifoldPtr(btPersistentManifold value)

setTimeStepAndCounters	back to summary
public void setTimeStepAndCounters(float collisionMarginTriangle, btDispatcherInfo dispatchInfo, btCollisionObjectWrapper convexBodyWrap, btCollisionObjectWrapper triBodyWrap, btManifoldResult resultOut)

setTriangleCount	back to summary
public void setTriangleCount(int value)

swigDirectorDisconnect	back to summary
protected void swigDirectorDisconnect() Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.swigDirectorDisconnect.

swigReleaseOwnership	back to summary
public void swigReleaseOwnership() Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.swigReleaseOwnership.

swigTakeOwnership	back to summary
public void swigTakeOwnership() Overrides com.badlogic.gdx.physics.bullet.collision.btTriangleCallback.swigTakeOwnership.

public Class btConvexTriangleCallback

Field Summary

Constructor Summary

Method Summary

Field Detail

Constructor Detail

Method Detail